Dr. Chidi Kingsley Nnakwo
Dr. Chidi Kingsley Nnakwo is a SENIOR LECTURER in METALLURGICAL AND MATERIALS ENGINEERING Department, Faculty Of Engineering in Nnamdi Azikiwe University
|  |
Staff Profile
I am Engr. Dr. Kingsley Chidi Nnakwo, a Lecturer and researcher in the Department of Metallurgical and Materials Engineering, Nnamdi Azikiwe University, Awka, Nigeria. My research interest is on Alloy System Design (Physical Metallurgy), Corrosion, and High Temperature Materials Development (Nanomaterials and Biomaterials).
Personal Information
Email: | |
Phone: | |
Address: | Metallurgical And Materials Engineering, Faculty Of Engineering, Nnamdi Azikiwe University, Awka. |
Faculty/Unit: | FACULTY OF ENGINEERING |
Department/Sub-Unit: | METALLURGICAL AND MATERIALS ENGINEERING |
Social Profiles
Interest Areas
Academic Qualifications
| Degrees / Basic Certificates | |
|---|---|
| 1 | NNAMDI AZIKIWE UNIVERSITY, AWKA, NIGERIA. (Doctor of Philosophy, November, 2017) September, 2014 to November, 2017 Ph.D. METALLURGICAL AND MATERIALS ENGINEERING |
| 2 | NNAMDI AZIKIWE UNIVERSITY, AWKA, NIGERIA. (Bachelor Degree, July, 2017) October, 2004 to July, 2009 B.Eng METALLURGICAL AND MATERIALS ENGINEERING |
| 3 | NNAMDI AZIKIWE UNIVERSITY, AWKA, NIGERIA. (Master Degree, May, 2014) September, 2011 to May, 2014 M.ENG METALLURGICAL AND MATERIALS ENGINEERING |
| 4 | LOCAL GOVERNMENT SECONDARY SCHOOL, AJAOKUTA. (SSCE, June, 2003) October, 1998 to June, 2003 SSCE |
| 5 | CENTRAL SCHOOL UMULOKPA. (FSLC, July, 1995) October, 1990 to July, 1995 FSLC |
Relevant/Working Experience
| 1 | Deputy Director, Nnamdi Azikiwe University January, 2025 to Present |
| 2 | Head of Department, Nnamdi Azikiwe University September, 2024 to December, 2024 |
| 3 | Departmental PG Coordinator, Nnamdi Azikiwe University July, 2023 to November, 2024 |
| 4 | Senior Lecturer, Nnamdi Azikiwe University Awka October, 2022 to Present |
| 5 | Departmental Examinations Officer, Nnamdi Azikiwe University March, 2019 to July, 2023 |
| 6 | LECTURER 1, NNAMDI AZIKIWE UNIVERSITY, AWKA, NIGERIA March, 2019 to October, 2022 |
| 7 | Lecturer II, Assistant Lecturer, Enugu State University of Science and Technology May, 2015 to March, 2019 |
| 8 | PHYSICS TEACHER, BRITISH SPRING COLLEGE, AWKA April, 2015 to May, 2015 |
| 9 | PHYSICS AND MATHEMATICS TEACHER, ST. RAPHAEL SECONDARY SCHOOL, AWKUZU January, 2014 to April, 2015 |
Creative Output
| Journal Articles | |
|---|---|
| 1 | Ifeanacho Uchenna Okeke, Kingsley Chidi Nnakwo and Eugene Ekedumogu Nnuka. (2024, July), "Unveiling manganese effects on the hardness and electrical resistivity of Cu-20wt%Zn-xMn alloy", UNIZIK Journal of Engineering and Applied Sciences, Vol. 3, (Issue 2), pp 260-265 |
| 2 | Charity M. Nkinyam, Chika O. Ujah, Kingsley C. Nnakwo, Obiora Ezeudu, Daramy V.V. Kallon, Ikechukwu Ike-Eze C. Ezema. (2024, November), "Design and implementation of a waterless solar panel cleaning system", Unconventional Resources, Vol. 5, pp 100131 |
| 3 | Charity M. Nkinyam, Chika Oliver Ujah, Kingsley C. Nnakwo, Daramy V.V. Kallon. (2024, September), "Insight into organic photovoltaic cell: Prospect and challenges", Unknown Journal or Publisher |
| 4 | Kingsley C. Nnakwo, Christian T. Nwajioke, Jeremiah L. Chukwuneke, Bonaventure C. Ugwuanyi, Kennedy C. Ogbunaofor, Christopher C. Ozoh. (2024, September), "Microstructure evolution in A356 alloy subjected to controlled heat treatment regimes processes.", Discover Applied Sciences, Vol. 6 |
| 5 | KC. Nnakwo, JL. Chukwuneke, PC. Okolie, MC. Anukwonke. (2024, July), "Stress-strain characteristics and electrical conductivity of niobium nanopowder modified silicon bronze", Glob J Biotechnol Biomater Sci., Vol. 10, (Issue 1), pp 11-15 |
| 6 | KC. Nnakwo, JL. Chukwuneke and PC. Okolie. (2024, July), "Development of high strength and super electrical conductive Cu-3Ti-2Si-1.5Ni-xNb alloys", Int J Nanomater Nanotechnol Nanomed., Vol. 10, (Issue 2), pp 68-72 |
| 7 | JL. Chukwuneke, HC. Olisakwe and KC. Nnakwo. (2024, July), "Enhancing mechanical properties of aluminium-based biocomposites through the addition of hybrid reinforcing particulates.", J Civil Eng Environ Sci., Vol. 10, (Issue 2), pp 50-53 |
| 8 | IU. Okeke, KC. Nnakwo, and EE. Nnuka. (2024, March), "Insight into the microstructure and mechanical properties of Cu-20wt%Zn-xSn ternary alloy", International Journal of Nanomaterials Nanotechnology and Nanomedicine, Vol. 10, (Issue 1), pp 8-11 |
| 9 | JL. Chukwuneke, J. Sinebe, U. Justice, KC. Nnakwo, HC. Olisakwe. (2024, February), "Evaluation of microstructure evolution and mechanical properties of Al-10Zn-1.63Si/Irvingia gabonensis particulates alloy composites.", Journal of Applied Biomaterials & Functional Materials, Vol. 22, (Issue 2) |
| 10 | Hafeez Ajibade, Chika Oliver Ujah, Kingsley C. Nnakwo & Daramy V. V. Kallon. (2024, July), "Improvement in battery technologies as panacea for renewable energy crisis", Discover Applied Sciences, Vol. 6, pp 374 |
| 11 | CW. Onyia, EE. Nnuka, KC. Nnakwo, and SE Ede. (2023, December), "Effect of sodium content on the structure and mechanical properties of silicon bronze (Cu-3wt%Si alloys).", Journal of Civil Engineering and Environmental Sciences, Vol. 9, (Issue 2), pp 90-95 |
| 12 | JL. Chukwuneke, JE. Sinebe, Anthony, EE., Echezona, NO., Onyemazuwa, AA. & KC. Nnakwo. (2023, December), "Production and thermo-structural analysis of a hybridized natural fibre-based ceiling board for building applications.", Advances in Mechanical Engineering., Vol. 15, (Issue 12) |
| 13 | Kingsley C. Nnakwo, Felix E. Amadi, Victor S. Aigbodion, Johnson N. Ezeanyanwu, Celestine C. Nwogbu, Alfred O. Agbo, Emmanuel N. Okigbo, Cynthia C. Daniel‑Mkpume. (2023, October), "Improving the thermo-physical behavior of Li2O-Al2O3-P2O5-SiO2 glass–ceramic system by triple-step heat treatment processes.", The International Journal of Advanced Manufacturing Technology, Vol. 129, pp 3447-3452 |
| 14 | NE. Nwankwo, AI. Ijomah, KC. Nnakwo and IU. Okeke. (2023, September), "Grain refinement, impact energy, and physiomechanical properties of Cu-3Si-3W and Cu-3Si- 3Mn alloys via alloying and solid solution treatment", Journal of Emerging Technologies and Innovative Research (JETIR), Vol. 10, (Issue 9), pp 583-589 |
| 15 | KC. Nnakwo, JU. Odo, AI. Ijomah. (2023, September), "Mechanical characteristics of stir-cast Irvingiawombolu reinforced Al-4wt%Cu composite", International Journal of Novel Research in Civil Structural and Earth Sciences, Vol. 10, (Issue 3), pp 1-7 |
| 16 | AI. Ijomah, KC. Nnakwo, EE. Nnuka, IU. Okeke. (2023, September), "Enhancing the structure and mechanical properties of Cu-3Si-Al ternary alloy by addition of aluminium", International Journal of Novel Research in Engineering and Science, Vol. 10, (Issue 2), pp 7-11 |
| 17 | AI. Ijomah, KC. Nnakwo, JU. Odo, IU. Okeke. (2023, September), "Microstructure, impact energy, density, and electrical properties of Cu-3Si alloy system doped with molybdenum", International Journal of Novel Research in Engineering and Science, Vol. 10, (Issue 9), pp 1-6 |
| 18 | AI. Ijomah, KC. Nnakwo, IU. Okeke, JU. Odo. (2023, September), "Tailoring the surface morphology of Al, Mo-doped Copper-silicon alloys for enhanced impact resistance", International Journal of Novel Research in Electrical and Mechanical Engineering, Vol. 11, (Issue 1), pp 1-6 |
| 19 | KC. Nnakwo, JU. Odo, AI. Ijomah. (2023, September), "Reinforcing potential of Irvingia wombolu shell particulates in Al-2Nb-0.5Si eco-composite", International Journal of Novel Research in Civil Structural and Earth Sciences, Vol. 10, (Issue 3), pp 8-14 |
| 20 | AI. Ijomah, KC. Nnakwo, NE. Nwankwo, BC. Ugwuanyi. (2023, September), "Solid solution-induced ultrafine Cu-3Si-Al and Cu-3Si-Mo ternary alloy", International Journal of Engineering Research and Reviews, Vol. 11, (Issue 3), pp 59-63 |
| 21 | AI. Ijomah, KC. Nnakwo, NE. Nwankwo, IU. Okeke. (2023, September), "Synergistic effects of alloying elements and solid solution treatment on the impact energy, density and conductivity of Cu-3Si-3(Zn, Sn) alloys system", International Journal of Civil and Structural Engineering Research,, Vol. 11, (Issue 1), pp 85-90 |
| 22 | AI. Ijomah, KC. Nnakwo, JU. Odo, IU. Okeke. (2023, September), "Microstructure, impact and electrical behavior of fine grained Cu-Si-(Mg, Ti) alloy after solid solution strengthening", Journal of Emerging Technologies and Innovative Research (JETIR), Vol. 10, (Issue 9), pp 590-597 |
| 23 | AI. Ijomah, KC. Nnakwo, NE. Nwankwo, IU. Okeke. (2023, September), "Evaluation of solid solution strengthening of copper-silicon binary alloys by carbide forming elements", International Journal of Mechanical and Industrial Technology, Vol. 11, (Issue 1), pp 48-53 |
| 24 | AI. Ijomah, KC. Nnakwo, JU. Odo, IU. Okeke. (2023, September), "Improving the structure, tensile strength and hardness of molybdenum-doped copper-silicon alloy system", Journal of Mechanical and Industrial Technology, Vol. 11, (Issue 1), pp 54-59 |
| 25 | AI. Ijomah, KC. Nnakwo, JU. Odo, IU. Okeke. (2023, September), "Experimental study of microstructure, impact energy, physical, and electrical properties of Al-doped Cu-3Si-Al ternary alloy", International Journal of Civil and Structural Engineering Research, Vol. 11, (Issue 1), pp 79-84 |
| 26 | NE. Nwankwo, KC. Nnakwo, AI. Ijomah, IU. Okeke. (2023, September), "Influence of homogenization heat treatment on grain characteristics and mechanical properties of copper-silicon-zinc and coppersilicon- tin ternary alloys", International Journal of Engineering Research and Reviews, Vol. 11, (Issue 1), pp 64-69 |
| 27 | AI. Ijomah, KC. Nnakwo, EE. Nnuka, IU. Okeke. (2023, September), "Grain characteristics, tensile strength and hardness of solid solution heat treated copper-silicon-titanium and copper-silicon-magnesium alloys", International Journal of Novel Research in Electrical and Mechanical Engineering, Vol. 11, (Issue 1), pp 7-13 |
| 28 | CN. Mbah, DC Onyeabor, BC Ugwuanyi, MG Anuta, CS Nebechi, and KC Nnakwo. (2023, July), "Evaluation of corrosion characteristics of mild steel in the acidic environment using Cocoyam and Almond leaves extracts as inhibitors", Journal of Civil Engineering and Environmental Sciences, Vol. 9, (Issue 2), pp 20-24 |
| 29 | CN. Mbah, CS. Nebechi, NE. Oko, DC. Onyeabor, KC. Nnakwo, and EI. Nweke. (2023, June), "Green corrosion inhibition performance of orange leaves extract on mild steel sheet buried in an acidified soil.", International Journal of Research in Advanced Engineering and Technology, Vol. 9, (Issue 2), pp 24-27 |
| 30 | Chilee Ekwedigwe, Kingsley C. Nnakwo, Chidume N. Nwambu. (2023, April), "Viscoelastic properties of alkaline treated walnut shell/rice straw fiber/epoxy biocomposite", Journal of Civil Engineering and Environmental Sciences, Vol. 9, (Issue 1), pp 9-13 |
| 31 | Kingsley C. Nnakwo, J. U. Odo, K. O. Eweka, J. S. Okafor, A. I. Ijomah, E. A. Maduka, B. C. Ugwuanyi. (2022, April), "Evaluation of the Electrical Conductivity and Mechanical Properties of Cu–3Ti–1.5Ni–0.5Si Quaternary Alloy", JOM: the journal of the minerals, metals, and materials society, Vol. 74, (Issue 5) |
| 32 | K. C. Nnakwo, F. O. Osakwe, B. C. Ugwuanyi, P. A. Oghenekowho, I. U. Okeke, E. A. Maduka. (2021, September), "Grain Characteristics, Electrical Conductivity, And Hardness Of Zn-doped Cu-3Si Alloys System", SN Applied Sciences, Vol. 3, (Issue 11), pp 1-10 |
| 33 | Kingsley C. Nnakwo, Christopher N. Mbah, Sabina N. Ude. (2020, July), "Influence Of Chemical Composition On The Conductivity And On Some Mechanical Properties Of Mg-doped Cu-Si Alloy", Journal of King Saud University–Engineering Science, Vol. 32, (Issue 5), pp 287-292 |
| 34 | Christopher Nwankwo Mbah, Cynthia Chinyere Onah, Kingsley Chidi Nnakwo. (2020, March), "Effectiveness Of Irvingia Wombolu Extract On Corrosion Inhibition Of Mild Steel In Hydrochloric Acid Solution", Engineering Research Express., Vol. 2, (Issue 1) |
| 35 | Kingsley C. Nnakwo, Christopher N. Mbah, and Eugene E. Nnuka. (2019, October), "Influence Of Trace Additions Of Titanium On Grain Characteristics, Conductivity And Mechanical Properties Of Copper-silicon-titanium Alloys", Heliyon, Vol. 5, (Issue 10) |
| 36 | Kingsley C. Nnakwo, Felix E. Amadi, and Christopher N. Mbah. (2019, July), "Influence Of Heat Treatment Regimes On Crystalline Phase Formation And Physical Properties Of Li2O-SiO2-Al2O3 Glass System", Materials Research Express, Vol. 6 |
| 37 | S. A. Adzor, E. E. Nnuka, and K. C. Nnakwo. (2019, June), "Effect Of Welding Consumable On Mechanical Properties Of Micro-alloyed Steel Weldment", International Journal of Innovative Science and Research Technology., Vol. 4, (Issue 6), pp 419-425 |
| 38 | Robert A. Onwumere, Kingsley C. Nnakwo and Boniface A. Okorie. (2019, April), "Effect Of Alkaline Treatment On Mechanical And Thermal Properties Of Coconut Shell Particulates Reinforced Epoxy Composite", American Journal of Chemistry and Materials Science (ajcms)., Vol. 6, (Issue 1), pp 10-14 |
| 39 | CN. Mbah, BC. Ugwuanyi, KC. Nnakwo. (2019, September), "Effect of welding parameters on the mechanical properties of arc–welded C1035 medium carbon steel.", International Journal of Research in Advanced Engineering and Technology, Vol. 5, (Issue 4), pp 30-33 |
| 40 | BC. Ugwuanyi, CN. Mbah,KC. Nnakwo. (2019, September), "The hardness and impact strength of arc: Welded C1035 medium carbon steel", International Journal of Research in Advanced Engineering and Technology, Vol. 5, (Issue 4), pp 27-29 |
| 41 | Kingsley Chidi Nnakwo. (2019, October), "Effect Of Tungsten Content On The Structure, Physical And Mechanical Properties Of Silicon Bronze (Cu-3 Wt% Si)", Journal of King Saud University-Science, Vol. 31, (Issue 4), pp 844-848 |
| 42 | Kingsley C Nnakwo, Christopher N Mbah, Cynthia C Daniel-Mkpume. (2019, October), "Investigation Of The Structural Sensitive Behavior Of Cu-3Si-xMn Ternary Alloys", Journal of King Saud University-Science, Vol. 31, (Issue 4), pp 1056-1063 |
| 43 | CC Daniel-Mkpume, EG Okonkwo, VS Aigbodion, PO Offor, KC Nnakwo. (2019, April), "Silica Sand Modified Aluminium Composite: An Empirical Study Of The Physical, Mechanical And Morphological Properties", Materials Research Express, Vol. 6, (Issue 7), pp 076539 |
| 44 | Cynthia Chinyere Onah, Christopher Nwankwo Mbah, Kingsley Chidi Nnakwo. (2019, April), "Inhibitive Characteristics Of Irvingia Gabonensis Extract On Mild Steel Corrosion In Hydrochloric Acid", American Journal of Chemistry and Materials Science (ajcms), Vol. 6, (Issue 2), pp 15-20 |
| 45 | KC Nnakwo, EE Nnuka. (2018, March), "Correlation Of The Structure, Mechanical And Physical Properties Of Cu3wt% Si-xwt% Sn Silicon Bronze", Journal of Engineering and Applied Sciences, Vol. 13, pp 83-91 |
| 46 | Nnakwo K. C., Okeke I. U. and Nnuka E. E.. (2017, July), "Effect Of Zinc Content On The Structure And Mechanical Properties Of Silicon Bronze", International Journal of Scientific Research in Science, Engineering and Technology, Vol. 3, (Issue 5), pp 179-183 |
| 47 | Emeruwa O. E., Nnakwo K. C. and Atuanya C. U.. (2017, July), "Investigative Study Of The Structure And Mechanical Behaviour Of Horse Eye Bean Seed Shell Ash Reinforced Aluminium Alloy Matrix Composite", International Journal of Scientific Research in Science, Engineering and Technology, Vol. 3, (Issue 5), pp 8-13 |
| 48 | Odinachi C. C., Nnakwo K. C., Nwoke V. I. and Nnuka E. E.. (2017, July), "Effect Of Soaking Time And Quenching Media On The Structure And Mechanical Properties Of Al-5.6wt%Zn-2.5wt%Mg Alloy", International Journal of Scientific Research in Science, Engineering and Technology, Vol. 3, (Issue 5), pp 1-7 |
| 49 | Obi C. A., Nnuka E. E. and Nnakwo K. C.. (2017, March), "Effect Of Soaking Time And Quenching Media On The Structure And Mechanical Properties Of Aluminium Bronze (Cu-10%wt.Al)", International Journal of Scientific Research in Science, Engineering and Technology, Vol. 3, (Issue 2), pp 311-317 |
| 50 | KC Nnakwo, IU Okeke, EE Nnuka. (2017, August), "Structural Modification And Mechanical Properties Of Cu-3wt% Si-xwt% Sn Alloy", International Journal of Scientific Research in Science, Engineering and Technology, Vol. 3, (Issue 5), pp 184-187 |
| 51 | Kingsley Chidi Nnakwo, Charles Amamchukwu Obi, Jerome Ugwu Odo. (2017, October), "Effect Of Heat Treatment Parameters On The Structure And Mechanical Properties Of Aluminium Bronze (Cu-10wt% Al)", American Journal of Materials Science and Application, Vol. 5, (Issue 3), pp 16-24 |
| 52 | Nwigbo S. C, Nnakwo N. C. and Nnakwo K. C.. (2016, September), "Effect Of Fiber Content On The Physio-mechanical Properties Of Irvingia Gabonensis Shell Fiber Reinforced Polyester Composite", International Journal of Innovative Research and Advanced Studies, Vol. 3, (Issue 10), pp 107-111 |
| 53 | Odo J. U., Nnakwo K.C., Obiorah S.M.O., Mbah C.N., Nwoye C. I. and Ifejika A.C.. (2015, November), "Effect Of Iron Removal On The Structure And Mechanical Properties Of Aluminium-silicon Alloys", International Journal of Scientific Research in Science, Engineering and Technology, Vol. 1, (Issue 6), pp 555-562 |
| 54 | Nnakwo K.C., Nnuka E.E., Odo J.U., Obiorah S.M. and Oghenekowho P.A.. (2014, August), "Effect Of Magnesium And Manganese On The Secondary Phase And Mechanical Properties Of Aluminium-4%copper Alloy", International Journal of Engineering Research and Technology, Vol. 3, (Issue 8), pp 1267-1276 |
| 55 | Nwoye C.I., Agbo A.O., Nnakwo K.C., Ameh E.M. and Nwogbu C.C. (2013, December), "Reliability Level Of Methane Gas Production Dependence On Organic Loading Rate And Hydraulic Retention Time During Biodegradation Of Fruit Wastes", Journal of Environmental Bioremediation and Biodegradation, Vol. 1, (Issue 2), pp 66-72 |
| Conference Papers | |
| 1 | CC. Daniel-Mkpume, CJ. Aneke, KN. Mkpume, CS. Obayi, UO. Uyor, UC. Ogbuefi, KC. Nnakwo & EG. Okonkwo.. (2023, October), "Influence of filler interaction on tensile, impact and hardness properties of a hybrid polyester composite", |
Academic Leadership Qualities
| Supervisions | |
|---|---|
| 1 | "INVESTIGATION OF MICROSTRUCTURE EVOLUTION, ELECTRICAL CONDUCTIVITY, AND MECHANICAL PROPERTIES OF SEVERELY DEFORMED Cu-0.3Si-0.3W-0.2Ni ALLOY" (2024). Completed Masters project by OBIEKWE CHARLES IFEANYICHUKWU, 2020256004P |
| 2 | "Heat Treatment Regime Effects on the Grain Characteristics and Mechanical Properties of Al-7Si-2Mg-1Cu Alloy" (2024). Completed Masters project by Nwajioke Christian Tochi (2021256001FA) |
| 3 | "Effect of Macro-Additives on the Structure and Mechanical Properties of Al-4%Cu Alloy" (2024). Completed Masters project by Ugochukwu Victor Anyafulu (2020256001F) |
| 4 | "INFLUENCE OF THERMO-CHEMICAL TREATMENT AND PARTICULATE CONTENTS ON THE MECHANICAL AND WEAR BEHAVIOR OF MANGIFERA INDICA SHELL/CALCIUM OXIDE HYBRIDIZED EPOXY-BASED COMPOSITES" (2024). Completed Masters project by EGBUCHE EMMANUEL MUOFUNANYA 2017246008F |
| Grants | |
| 1 | Awardee: "TETFUND INSTITUTION BASED RESEARCH (IBR) GRANT" (January, 2024 to September, 2024). Completed sponsored grant by TERTIARY EDUCATION TRUST FUND (TETFUND) |
| 2 | Awardee: "Scholarship for Indigent Students of Metallurgical and Materials Engineering NAU" (October, 2024 to December, 2024). Completed sponsored grant by Metallurgical and Materials Engineering Alumni and Friends |
| Editorships | |
| 1 | Editor, "EFFECT OF DOUBLE THERMAL PRE-AGEING ISOTHERMAL TREATMENT ON VICKER’S MICRO-HARDNESS OF Ti6Al4V ALLOYS FOR DENTAL IMPLANT APPLICATIONS" (April, 2024) |
| 2 | Editor, "Unveiling manganese effects on the hardness and electrical resistivity of Cu-20wt%Zn-xMn alloy" (June, 2024) |
| Reviewerships | |
| 1 | Reviewer, "Laser welding of ZrO2 ceramics and 304 stainless steel with Cu/AgCuTi composite welding" (January, 2024) |
| 2 | Reviewer, "Transient Thermal Mapping Utilizing the Sintering of Glass Ceramics" (December, 2024) |
| 3 | Reviewer, "Correlation between Jc enhancement and phase homogeneity in Sn-Ge co-doped Nb3Al superconducting wires" (November, 2022) |
| 4 | Reviewer, "Physical aging-induced embrittlement of PLA/PBAT blends probed by tensile test and AFM nanomechanical mapping" (November, 2022) |
| 5 | Reviewer, "An antibacterial coaxial electrospun polylactic acid/silk fibroin loaded with nano-ZnO and Voltaren" (October, 2022) |
| 6 | Reviewer, "Preparation and mechanical properties of a composite by glass-forming alloy bonding aluminum oxide" (February, 2022) |
| 7 | Reviewer, "A Potential Dual-Functional Thermoelectric and Electroelectric Polymer Composite" (February, 2022) |
| 8 | Reviewer, "Effect Of Process Parameters On The Microstructure And Mechanical Properties Of Micro-alloyed Steel" (December, 2019) |
| Examinerships | |
| 1 | Examiner, "Internal -Internal Examiner" (May, 2023). Completed Internal-Internal Exam |
| 2 | Examiner, "Internal/External Examiner" (November, 2022). Completed Internal-External Exam |
| 3 | Examiner, "Monitoring the Performance of Condenser Unit in Steam Power Plant Operating under various Input Conditions" (September, 2020 to September, 2024). Completed Internal-External Exam |
| 4 | Examiner, "Internal-External Examiner" (October, 2017 to April, 2023). Completed Internal-External Exam |
| 5 | Examiner, "Reinforcing Characteristics of Bamboo Leaf Particulates and High-Temperature Metallic Materials on Thermal, Mechanical, Structural, and Corrosion Performances of Aluminium-Based Biocomposites" (September, 2016 to February, 2025). Completed Internal-External Exam |
| Contributions to the University/Society | |
| 1 | National Assistant Technical Secretary, "Nigerian Metallurgical Society (NMS)" (April, 2025) |
| 2 | Chairman Project Management and Implementation Committee, "Nnamdi Azikiwe University Directorate of Business Ventures and Consultancy Services" (January, 2025) |
| 3 | Paper presenter, "Nigerian Society of Engineers (NSE)" (January, 2025) |
| 4 | Chairman Electoral Committee, "Akiyi Umulokpa Autonomous Community Caretaker Committee" (September, 2024 to November, 2024) |
| 5 | Office and Open Space Committee, "Nnamdi Azikiwe University/MEMBERSHIP OF SENATE AND VICE-CHANCELLOR’S COMMITTEES BOARDS FOR THE 2023-2024 ACADEMIC YEAR" (February, 2024) |
| 6 | Head of Department, "Department of Metallurgical and Materials Engineering, Nnamdi Azikiwe University Awka Nigeria" (September, 2024) |
| 7 | Member Conference Committee, "Nigerian Metallurgical Society (NMS)" (February, 2024 to November, 2024) |
| 8 | Committee on Welfare, "Faculty of Engineering" (June, 2023) |
| 9 | Committee on Matriculation, "Faculty of Engineering" (June, 2023) |
| 10 | Chairman Publication and Award Sub-Committee, "Umulokpa Academic Congress (UMAC)" (June, 2023) |
| 11 | Alumni Faculty Representative, "Unizik Alumni" (February, 2022) |
| 12 | CHAIRMAN, UMAC EDUCATION COMMITTEE, "Umulokpa Academic Congress (UMAC)" (January, 2022) |
| 13 | MEMBER, "COMMITTEE ON FACULTY OF ENGINEERING BUSINESS VENTURE" (July, 2021) |
| 14 | MEMBER, "COMMITTEE ON CONVOCATION/NATIONAL ENGINEERING PROJECT EXHIBITION" (April, 2021) |
| 15 | SECRETARY, "COMMITTEE ON FACULTY OF ENGINEERING SPACE ALLOCATION" (March, 2021) |
| 16 | EXAM OFFICER, "DEPARTMENT OF METALLURGICAL AND MATERIALS ENGINEERING" (March, 2019) |
Membership of Professional/Relevant Bodies
| 1 | Fellow Member, "Nigerian Metallurgical Society (NMS)" - f1243 (member since 2023), https://nigerianmetsociety.org/ |
| 2 | Professional Member, "Council for the Regulation of Engineering in Nigeria" - R37081 (member since 2017), https://coren.gov.ng/ |
| 3 | Professional Member, "Nigerian Society of Engineers (NSE)" - 39293 (member since 2016), https://nse.org.ng/ |
Relevant Events Attended
| Conferences | |
|---|---|
| 1 | "Sustainable Energy and Smart Agriculture for National Development", (Faculty of Engineering Nnamdi Azikiwe University, Awka), 6th November, 2024 to 7th November, 2024; ASUU Secretariat, Nnamdi Azikiwe University, Awka |
| 2 | "Economic Recovery Through Development of Metal Industries", (Nigerian Metallurgical Society (NMS)), 30th October, 2024 to 2nd November, 2024; University of Nigeria Enugu Campus |
| 3 | "Entrenching and Strengthening Engineering Practitioners' Code of Conduct for Resilient Engineering Practice in Nigeria", (Council for the Regulation of Engineering in Nigeria (COREN)), 7th August, 2023 to 9th August, 2025; International Conference Centre, Abuja |
| 4 | "Entrenching and Strengthening Engineering Practitioners' Code of Conduct for Resilient Engineering Practice in Nigeria", (Council for the Regulation of Engineering in Nigeria (COREN)), 7th August, 2023 to 9th August, 2023; International Conference Centre, Abuja |
| 5 | "Domestication and Development of Codes, Standards, and Regulations as a Panacea of Engineering Infrastructure Failures in Nigeria", (COREN), 8th August, 2022 to 8th October, 2022; International Conference Center Abuja |
| 6 | "Waste in Green Economy for Sustainable Industrial Development", (Faculty of Engineering, Nnamdi Azikiwe University, Awka), 9th February, 2022 to 10th February, 2022; Nnamdi Azikiwe University, Awka |
| 7 | "Materials Development and Utilization: Catalyst For Economic Advancement", (Materials Science and Technology Society of Nigeria (MSJ)), 8th December, 2021 to 10th December, 2021; Nnamdi Azikiwe University, Awka |
| 8 | "Expansion of the Energy Mix for National Economic Growth", (The Nigerian Society of Engineers), 6th December, 2021 to 10th December, 2021; International Conference Centre, Abuja |
| Other Events | |
| 1 | "COUNCIL FOR THE REGULATION OF ENGINEERING ASSEMBLY", (COREN), 9th August, 2021 to 11th August, 2021; INTERNATIONAL CONFERENCE CENTRE (ICC), ABUJA |
| 2 | "RAW MATERIALS PROCESSING AND UTILIZATION FOR SUSTAINABLE DEVELOPMENT", (FACULTY OF ENGINEERING, NNAMDI AZIKIWE UNIVERSITY, AWKA), 13th August, 2018 to 14th August, 2018; UNIVERSITY AUDITORIUM, UNIZIK, AWKA, NIGERIA |
| 3 | "29th Annual Conference And AGM, Timely Completion Of Nigerian Iron And Steel Projects: The Key To Rapid Industrialization", (Nigerian Metallurgical Society (NMS)), 30th October, 2013 to 2nd November, 2013; Ajaokuta Steel Complex |