Dr. Anselem Ogah Ogah
Dr. Anselem Ogah Ogah is a SENIOR LECTURER in POLYMER AND TEXTILE ENGINEERING Department, Faculty Of Engineering in Nnamdi Azikiwe University
|  |
Staff Profile
I'm Dr. Ogah Anselm Ogah, born on the 3rd of August, 1970. I obtained a bachelor of Engineering Degree in Polymer and Textile Engineering in the year 1997, from the Federal University of Technology, FUTO, Imo State Nigeria. I obtained a Master of Science Degree in Polymer Science and Technology in the year 2007, from Ebonyi State University, Abakaliki Nigeria. I was a visiting PhD Scholar to the Composite Materials and Engineering Center, Washington State University, Pullman, USA; where I conducted data analysis on my PhD Thesis titled "Characterization and Comparison of Thermal, Mechanical, Rheological and Water Absorption Properties of Agro Fiber Filled High density Polyethylene Biocomposites in the year 2012 through 2013. I obtained a Doctor of Philosophy Degree in Polymer Chemistry and Technology in the year 2014, from Ebonyi State University, Abakaliki Nigeria. I was an Adjunct Lecturer I in the Department of Polymer and Textile Engineering, Faculty of Engineering, Nnamdi Azikiwe University, Awka, Nigeria from September 2016 to March 2019. Currently, I am a Lecturer I in the Department of Polymer and Textile Engineering, starting from 18th March, 2019 to date . I have published more than 20 peer reviewed journal articles in national and international journals. I have presented my research findings in international conferences. I was awarded best paper presenter at the 5th International Scientific Conference on Applied Science and Engineering, held at the Flora Grand Hotel, Dubai, UAE, December, 29-30, 2015.
Personal Information
Email: | |
Phone: | |
Address: | Polymer And Textile Engineering, Faculty Of Engineering, Nnamdi Azikiwe University, Awka. |
Faculty/Unit: | FACULTY OF ENGINEERING |
Department/Sub-Unit: | POLYMER AND TEXTILE ENGINEERING |
Social Profiles
Academic Qualifications
| Degrees / Basic Certificates | |
|---|---|
| 1 | Ebonyi State University, Abakaliki, Nigeria. (Doctor of Philosophy, November, 2014) April, 2010 to November, 2014 PhD Polymer Chemistry And Technology |
| 2 | Ebonyi State University, Abakaliki, Nigeria. (Master Degree, July, 2007) July, 2003 to July, 2007 M.Sc. Polymer Science And Technology |
| 3 | Federal University Of Technology, Owerri, Imo State, Nigeria. (Bachelor Degree, October, 1997) October, 1991 to October, 1997 Polymer And Textile Engineering |
Relevant/Working Experience
| 1 | Deputy Director, Office Space and Space Allocation (OSSA), Nnamdi Azikiwe University Awka January, 2025 to Present |
| 2 | Head of Department-Department of Polymer Engineering, Nnamdi Azikiwe University Awka September, 2024 to December, 2024 |
| 3 | PG Coordinator, Polymer Engineering Unizik July, 2023 to Present |
| 4 | Senior Lecturer, Nnamdi Azikiwe University, Awka October, 2022 to Present |
| 5 | Lecturer 1, Nnamdi Azikiwe University, Awka March, 2019 to Present |
| 6 | Lecturer 1, Ebonyi State University, Abakaliki October, 2016 to February, 2019 |
| 7 | Adjunct Lecturer 1, Nnamdi Azikiwe University, Awka September, 2016 to March, 2019 |
| 8 | Lecturer II, Ebonyi State University, Abakaliki October, 2013 to October, 2016 |
| 9 | Assistant Lecturer, Ebonyi State University, Abakaliki October, 2012 to October, 2013 |
| 10 | Senior Laboratory Technologist, Ebonyi State University, Abakaliki October, 2007 to October, 2012 |
| 11 | Laboratory Technologist l, Ebonyi State University Abakaliki October, 2004 to October, 2007 |
| 12 | Laboratory Technologist ll, Ebonyi State University, Abakaliki April, 2001 to October, 2004 |
Creative Output
| Books | |
|---|---|
| 1 | A.O. OGAH. (2017, August) Properties of Agro waste Polymer Composites OmniScriptum Publishing Group |
| Book Chapters | |
| 1 | Anselm Ogah Ogah , Friday Nwankwo Archibong , Emmanuel Obumneme Ezeani and Victor Ugochukwu Okpechi. (2025, February) The efficacy of piezo- and magnetoactive polymer scaffolds in tissue engineering Elsevier, pp 453-498 |
| 2 | Iheoma Chukwujike Nwuzor, Anselm Ogah Ogah, Anthony Chidi Ezika, Izuchukwu Odinakachi Madu and Martin Emeka Ibenta. (2025, February) Hybrid Polymeric Materials for Potential Applications in Bone Regeneration. Elsevier, pp 53-89 |
| 3 | Ogah Anselm Ogah. (2022, June) Determination of rheological properties of natural fiber polymer composites BP International, Vol. 2, pp 53-58 |
| Journal Articles | |
| 1 | Nwigbo, S.C., Ijioma, N.O., Ogah, A.O.. (2025, March), "Investigating Thermal Effect of Castor Seed Shell Use as Cement Raw Mix Admixture.", UNIZIK JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Vol. 4, (Issue 1), pp 1461-1473 |
| 2 | Ogah, Nwankwo, Allen, Nlemedim, Ime, Chima, Igberi. (2024, March), "Evaluation of physical, mechanical and thermal properties of epoxy composite filled with biofiber derived from Bambara nut shell filler", Polymer Bulletin, pp 1-19 |
| 3 | Ogah, A.O, Madu. I O, Timothy, U J, Eze, N.O, Ikelle, I.I. N.O. (2024, January), "Characterization of water absorption, thickness swelling and diffusion coefficient of natural fiber/epoxy biocomposites for application in aquatic environment", Journal of applied physical science international, Vol. 16, (Issue 1), pp 1-10 |
| 4 | Okoye, I.J., Idumah, C.I., Ogbu, E.J., Obi. C., Ezenkwa, O., Ogah, A.O., Ibenta. M.. (2024, January), "Development, fabrication, characterization, features and multifarious applications of cryogel polymeric nanoarchitectures: a review", Polymer-Plastic Technology And Materials, pp 1-22 |
| 5 | Ogah Anselm Ogah, *, Friday Nwankwo Archibong, Ojukwu Uju Pauline, Nwabueze Joseph Mbam, Ferriawan Yudhanto. (2024, March), "Investigating Natural Fiber Reinforced Polymer Composites, Biocomposites, Bionanocomposites Thermo-Mechanical Attributes Emerging Implementations", Journal of Fibers and Polymer Composites, Vol. 3, (Issue 2), pp 119-157 |
| 6 | Ogah, A.O., Nkwede, J.O. and Alita, E.C.. (2024, June), "Effect of Economic Globalization on Agricultural Bang for the Buck in China and Indonesia", IGI Global, pp 107-141 |
| 7 | Ogah, O.A., Nwoye, C.I., Ezeani, O.E., Ojukwu, U.P., Timothy, U.J. and Mbam, N.J.. (2024, September), "Quadratic Model for Evaluating the Hardness of Hazelnut Shell Polystyrene Composite Based on Input Concentration Ratio of its Constituent Materials", UNIZIK JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Vol. 3, (Issue 3), pp 826-835 |
| 8 | Ogah, A.O., Mbam, N.J., Ojukwu, U.P., Ohoke, F.O.. (2024, March), "Development of Green Composites Based on Castor Bean Shell (Ricinus communis) as Filler in Epoxy Resin Polymer", Journal of Fibers and Polymer Composites, Vol. 3, (Issue 1), pp 1-19 |
| 9 | Ikelle Issie Ikelle, Eze Nkechinyere Olivia, Ogah Anselem Ogah. (2023, August), "INNOVATIONS FOR SUSTAINABLE PLASTIC WASTE MANAGEMENT IN NIGERIA", Environmental Contaminants Reviews (ECR), Vol. 6, (Issue 2), pp 41-49 |
| 10 | Ogah Anselm Ogah, Izuchukwu Odinakachi Madu, Timothy Ukeme James, Eze Nkechi, Ohoke Francis Okemini. (2023, July), "Effect of Immersion Temperature on Mechanical, Water Absorption and Morphological Properties of Sodium Hydroxide Modified Fluted Stem Pumpkin Fiber Reinforced Polyester Bio-composites", Journal of Materials Science Research and Reviews, Vol. 6, (Issue 3), pp 455-467 |
| 11 | Syukri Yunus, Kuntum Khairah Umah, Hairul Abral, Ogah Anselm Ogah, Aulia. (2023, November), "Enhancing Current Density and Specific Capacitance of Nata de Coco, TEMPO, and MXene Composites through Boiling Time Variations", Andalasian International Journal Applied Science Engineering Tech., Vol. 3, (Issue 3), pp 1-9 |
| 12 | Friday Nwankwo Archibong1,* , Louis Chukwuemeka Orakwe2, Ogah Anselm Ogah2, Stephen Ogbonna Mbam1,*, Stephen Aroh Ajah1, Michael Emeka Okechukwu3, Christiana Ogonna Igberi4, Kosisochukwu Jideofor Okafor1, Melford Onyemaechi Chima5, and Ikelle Issie Ikelle6. (2023, January), "Emerging progress in montmorillonite rubber/polymer nanocomposites: a review", J Mater Sci, pp 1-34 |
| 13 | Friday Nwankwo Archibong, Louis Chukwuemeka Orakweh, Anselm Ogah Ogah, Peace Ugochinyerem Nlemedim & Stephen Ogbonna Mbam. (2023, June), "An overview on engineering bio-treatment methods for effluent in food processing industries", Global Journal of Science Frontier Research: H Environment & Earth Science, Vol. 23, (Issue 2), pp 1-28 |
| 14 | Ikelle Ikelle, Nworu Jerome, Eze Nkechi, Nworie Felix, John Jedidiah, Elom Nwabueze, Ogah Anselm. (2023, May), "Production of Biogas from Residential Bio-waste with the Digestate as Soil Enhancer", World Journal of Applied Chemistry, Vol. 8, (Issue 2), pp 34-38 |
| 15 | Anselm Ogah Ogah1*, Obumneme Emmanuel Ezeani1, Samuel Chukwuma Nwobi1, Ukeme James Timothy1, Ikelle Issie Ikelle2. (2022, September), "Identification of Opportunities for Utilization of Rice Husk Agricultural Waste Product", Scientific Reports Journal, Vol. 1, (Issue 1), pp 1-11 |
| 16 | Ogah, A.O, Ezeani, O.E, Ohoke, F.O. and Ikelle, I.I. (2022, November), "Effect of nanoclay on combustion mechanical and morphological Properties of recycled high density polyethylene/marula seed cake/organo-modified montmorillonite nanocomposites", Polymer Bulletin |
| 17 | Anselm Ogah Ogah1*, Obumneme Emmanuel Ezeani1, Timothy Ukeme James. (2022, July), "Mechanical and Morphological Properties of Fluted Pumpkin Stem Fiber (Telfaira occidentalis) Recycled High Density Polyethylene Nanocomposites", South Asian Research Journal of Engineering and Technology, Vol. 4, (Issue 4), pp 46-54 |
| 18 | Anselm Ogah Ogah1*, Obumneme Emmanuel Ezeani1, Samuel Chukwuma Nwobi1, Ikelle Issie Ikelle2. (2022, July), "Physical and Mechanical Properties of Agro-Waste Filled Recycled High Density Polyethylene Biocomposites", South Asian Research Journal of Engineering and Technology, Vol. 4, (Issue 4), pp 55-62 |
| 19 | Timothy, U.J. and Ogah, A.O.. (2021, June), "Transport Properties Of Toluene Through Reactive Compatiblized Polyethylene Terephthalate/Natural Rubber Using Dikanut Shell Powder As Filler", European Journal of Advances in Engineering and Technology, Vol. 8, (Issue 5), pp 9-20 |
| 20 | Nworie, F.S., Nwabue, F. IK., Ikelle, I.I., Ogah, A.O., Elom, N., Illochi, N.O., Itumoh, E.J. and Oroke, C.E.. (2018, October), "Activated Plantain Peel Biochar As Adsorbent For Sorption Of Zinc(II) Ions: Equilibrium And Kinetics Studies", Journal of Turkish Chemical Society A, Vol. 5, (Issue 3), pp 1257-1270 |
| 21 | OGAH Anselm Ogah and Ukeme Timothy James. (2018, February), "Mechanical Behavior Of Agricultural Waste Fibers Reinforced Vinyl Ester Biocomposites", Asian Journal of Physical and Chemical Sciences ·, Vol. 5, (Issue 1), pp 1-10 |
| 22 | Ikelle, I.I. , Nworie F.S. , Ogah A.O. and Ilochi, N.O.. (2017, December), "Study On The Combustion Properties Of Bio-Coal Briquette Blends Of Cassava Stalk", ChemSearch Journal, Vol. 8, (Issue 2), pp 29-34 |
| 23 | OGAH Anselm Ogah. (2017, September), "Rheological Properties Of Natural Fiber Polymer Composites", MOJ Polymer Science, Vol. 1, (Issue 4), pp 1-4 |
| 24 | OGAH, A.O. and CHUKWUJIKE, I.C.. (2017, October), "PHYSICOMECHANICAL PROPERTIES OF AGRO WASTE FILLED HIGH DENSITY POLYETHYLENE BIO-COMPOSITES", Journal of Institute of Polymer Engineers, Vol. 1, (Issue 2), pp 1-10 |
| 25 | Ogah, A.O., Ikelle, I.I., Nworie, F.S. and Ilochi, N.O.. (2017, November), "Kinetic Analysis of Thermal Stability and Activation Energy of Agro Wastes Using Flynn-Wall-Ozawa and Coats-Redfern Models", Nigerian Journal of Polymer Science and Technology, Vol. 12 |
| 26 | Anselm Ogah Ogah. (2016, September), "Characterization Of Sorghum Bran/Recycled Low Density Polyethylene For The Manufacturing Of Polymer Composites", Springer Science- Journal of Polymer and the Environment, Vol. 24, (Issue 3), pp 533-543 |
| 27 | Anselm O. Ogah, Karl R. Englund. (2016, February), "Thermal, Mechanical And Rheological Properties Of Agro Fiber Filled High Density Polyethylene Bio-composites", PAK Publishing Group, Vol. 4, (Issue 2), pp 10-21 |
| 28 | 1Ngele, S.O., 1N.I. Elom, 2P.A. Nwofe, 2P.E. Agbo, 1A.O. Ogah and 3R.C. Ehiri. (2015, October), "Diurnal Variation of ambient Air Pollutants Concentration in two Motor Parks in Ebonyi State, Nigeria", Advances in Environmental Biology, Vol. 9, (Issue 23), pp 271-278 |
| 29 | A.O.OGAH and F.K.ONWU. (2015, March), "Physicomechanical Properties Of Groundnut Shell Flour-Filled Maleic Acid Anhydride Compatibilized Natural Rubber (NR)/Low-Density Polyethylene Blends", International Knowledge Press, Vol. 2, (Issue 3), pp 137-146 |
| 30 | A. O. Ogah, N. I. Elom, S.O. Ngele, P. A. Nwofe, P. E. Agbo, K.R. Englund. (2015, June), "Water Absorption, Thickness Swelling And Rheological Properties Of Agro Fiber/HDPE Composites", IOSR, Vol. 2, (Issue 3), pp 66-73 |
| 31 | N.I. Elom, S.O. Ngele, P.E. Agbo, P.A. Nwofe, A.O. Ogah and J.E. Ekpe. (2015, October), "Generation And Management Of Electrical And Electronic Wastes (E-waste) In Abakaliki Capital Territory, Ebonyi State, Nigeria: Implications For Human Health Risk", IOSR, Vol. 9, (Issue 23), pp 271-278 |
| 32 | P.A. Nwofe, P.E. Agbo, N.I. Elom, A. O. Ogah, S.O. Ngele and R.A. Chikenze. (2015, September), "Concentration Dependent Optical Properties Of NiSe Thin Films Grown By The Solution Growth Technique", IOSR, Vol. 5, (Issue 1), pp 92-98 |
| 33 | Anselm O. Ogah and Joseph Nwode Afiukwa. (2014, ), "Characterization And Comparison Of Mechanical Behavior Of Agro Fiber Filled High-Density Polyethylene Bio-composites", SAGE, Vol. 33, (Issue 1), pp 37-46 |
| 34 | Anselm O. Ogah, Joseph N. Afiukwa, A. A. Nduji. (2014, February), "Characterization And Comparison Of Rheological Properties Of Agro Fiber Filled High-Density Polyethylene Bio-Composites", Scientific Research, Vol. 4, pp 12-19 |
| 35 | Anselm Ogah Ogah, Joseph Nwode Afiukwa and Karl Englund. (2014, August), "Characterization And Comparison Of The Thermal Stability Of Agro Waste Fibers In Bio-composites Application", ETHAN PUBLISHING, Vol. 1, (Issue 2), pp 84-93 |
| 36 | Ogah, A.O. and Afiukwa, J.N.. (2012, ), "The Effects Of Linear Low-Density Polyethylene On The Mechanical Properties Of High-Density Polyethylene Film Blends", Society for Science and Nature, Vol. 3, (Issue 2), pp 85-90 |
| 37 | A.O.Ogah and J.N. Afiukwa. (2012, March), "Effects Of Starch Blend On The Mechanical Properties And Biodegradability Of Polypropylene", Wilolud Journals, Vol. 5, (Issue 1), pp 20-25 |
| 38 | A.O. OGAH and F.K. Onwu. (2011, July), "Effects of Starch on Mechanical and Moisture Absorption Properties of Linear Low-Density Polyethylene Starch Composites", Journal of Scientific & Industrial Studies, Vol. 9, (Issue 1), pp 39-43 |
| 39 | A.O. OGAH and J.N. Mbam. (2010, May), "Mechanical Properties of Polyurethane Walnut Shell Flour Composites", African Journal of Engineering Research & Development, Vol. 3, (Issue 2), pp 39-43 |
| 40 | A.O. OGAH and J.N. Mbam. (2010, March), "Study of Mechanical Properties of Bio Fiber Filled Polypropylene Composites", African Journal of Engineering Research & Development, Vol. 3, (Issue 3), pp 50-56 |
| Conference Papers | |
| 1 | Ogah, A.O., Ezeani, O.E, Ohoke. F.O, Ikelle, I.I. (2024, January), "Effect of nanoclay on combustion, mechanical and morphological properties of recycled high density polyethylene/marula seed cake/organomodified montmorillonite nano composite", Springer Nature |
| 2 | Andika Wisnujati*, Linda Kusumastuti Wardana, Ferriawan Yudhanto , Rinasa Agistya Anugrah1 , Shafa Fakhira3 , Ogah Anselm Ogah4. (2024, January), "Application Technology and Digital Marketing for The Improvement of Production Capacity in Tempeh Small Industry", SAGE GRACE, pp 1-9 |
| 3 | Ferriawan Yudhanto1*, Rinasa Agistya Anugrah , Ade Utari Triwijayani , Ogah Anselm Ogah , Mamdouh Ahmed Omar. (2024, February), "Comparison Study of Water Quality and Organoleptic Analysis of Catfish (Clarias sp.) From Conventional Pond and Aquaponic Systems", ICBCD 2024, pp 1-6 |
| 4 | Ogah Anselm Ogah, Obumneme Emmanuel Ezeani and Timothy Ukeme James. (2021, December), "Effect of Nanographene on Mechanical Properties and Morphology of Nanocomposites Made of Recycled High Density Polyethylene and Fluted Pumpkin Stem Agricultural Waste Material", |
| 5 | OGAH ANSELM OGAH. (2017, October), "Physicomechanical Properties of Agro Waste Filled High Density Polyethylene Biocomposites", |
| 6 | OGAH ANSELM OGAH. (2015, December), "Thermal, Mechanical and Rheological Properties of Agro Fiber Filled High Density Polyethylene Biocomposites", |
Academic Leadership Qualities
| Supervisions | |
|---|---|
| 1 | "Production of Cement Using Castor Seed Shell As Additive for Improved Performance" (2025). Completed Masters project by Orji Nlewedim Ijioma (2017246010F) |
| 2 | "Mechanical Properties of Recycled Carbon Fiber Reinforced Polymer Composites from Automotive Parts" (2025). Ongoing Masters project by BLESSING ENE BERNARD (2024386001FN) |
| Editorships | |
| 1 | Editor, "UniZik Journal of Engineering and Applied Sciences" (March, 2025) |
| 2 | Editor, "Journal of fiber and polymer composite" (March, 2024) |
| 3 | Editor, "Scientific Reports Journal" (July, 2022) |
| Reviewerships | |
| 1 | Reviewer, "Tribo-mechanical Evaluation of Epoxy/Periwinkle Particulate Composites" (October, 2023) |
| 2 | Reviewer, "Preparation and application of profiled luminescent polyester fiber with phase change materials" (August, 2023) |
| 3 | Reviewer, "biocompatibility modulation of polyethylene terephthalate films by surface processing in non-temperature hybrid plasma" (July, 2023) |
| 4 | Reviewer, "Cellulase activity of Aspergillus niger in the biodegradation of rice husk" (October, 2017) |
| 5 | Reviewer, "Carbon materials thermal life estimation in space application" (October, 2017) |
| 6 | Reviewer, "The injection moulding of blended agricultural waste rice husks with high-density polyethylene" (April, 2017) |
| 7 | Reviewer, "Characterization of Maize (Zeamays) husk particles as a potential reinforcement for polymer composites" (February, 2016) |
| 8 | Reviewer, "Development of lignite bottom ash based geopolymer for use as thermal insulating building material" (August, 2016) |
| Examinerships | |
| 1 | Examiner, "FACULTY INTERNAL DEFENCE" (February, 2021 to March, 2024). Completed Internal-External Exam |
| 2 | Examiner, "Faculty Internal Defence" (August, 2019 to October, 2023). Completed Internal-Internal Exam |
| Contributions to the University/Society | |
| 1 | Vic Chairman of National/Technical Committee on Hard Fibers and Related Products, "Standards Organization of Nigeria" (April, 2025) |
| 2 | Deputy Director, "Nnamdi Azikiwe University Awka" (January, 2025) |
| 3 | PG Coordinator, "Department of Polymer Engineering, NAU" (February, 2024 to December, 2024) |
| 4 | HOD, "Nnamdi Azikiwe University Awka" (September, 2024 to December, 2024) |
| 5 | Project Coordinator, "Department of Polymer Engineering, NAU" (February, 2024 to December, 2024) |
| 6 | Labor Committee Member, "Academic Staff Union of Universities, NAU" (September, 2023) |
| 7 | Vice Chairman, Awka Chapter, "Institute of Polymer Engineers" (February, 2021) |
| 8 | Member, "FEG Space and Office Allocation Committee" (June, 2020) |
| 9 | Course Adviser, "Department of Polymer Engineering" (December, 2019) |
| 10 | Seminar / Project Coordinator, "Department of Polymer Engineering" (May, 2019) |
| 11 | Lab/workshop Coordinator, "Department of Polymer Engineering" (May, 2019) |
Membership of Professional/Relevant Bodies
| 1 | Full Member, "IGI Global" (member since 2024), https://www.igi-global.com |
| 2 | Professional Member, "Green Engineering Society" (member since 2024), https://journals.gesociety.org |
| 3 | Full Member, "Academia.edu" (member since 2024), https://helen.academia.edu |
| 4 | Professional Member, "Polymer Institute of Nigeria" (member since 2024), https://pin.polymerinstitute.org.ng |
| 5 | Full Member, "SciSpace" (member since 2023), https://scispace.com |
| 6 | Full Member, "Global Journals" (member since 2022), https://globaljournals.org |
| 7 | Professional Member, "COREN" - COREN/REG/R65226 (member since 2021), https://coren.gov.ng |
| 8 | Professional Member, "Institute Of Polymer Engineers" (member since 2020), https://ipe.institutepolymer.org.ng |
Relevant Events Attended
| Conference | |
|---|---|
| 1 | "International conference on macromolecules", (Mahatma Gandhi University, Kerala), 12th January, 2024 to 14th January, 2024; Physical |
| Seminar | |
| 1 | "Smart Polymers", (Department of Polymer Engineering), 21st March, 2024 to 21st March, 2024; Physical |
| Other Events | |
| 1 | "Institute Of Polymer Engineers 2017 AGM/Conference, “National Economic Diversification: The Role Of Polymer Engineers", (Institute of Polymers Engineers (IPE)), 4th October, 2017 to 7th October, 2017; National Engineering Center, Abuja, Nigeria, |
| 2 | " 5th International Scientific Conference On Applied Sciences And Engineering, (ISCASE)", (Scientific Group: www.scihost.org), 28th December, 2015 to 2nd January, 2016; United Arab Emirate |
| 3 | " ICT Capacity Building For Lecturers", (Ebonyi State University), 4th August, 2014 to 8th August, 2014; Information and Communications Technology/Research Center, Ebonyi State University |
| 4 | " Tertiary Education Trust Fund (TETFUND) Proposal Development Training Workshop", (Ebonyi State University), 5th August, 2013 to 7th August, 2013; Ebonyi State University, Abakaliki |
| 5 | " Seminar On “Bioproducts Development From Lignocellulosic Biomass", (Pacific Northwest National Laboratory in Richland WA), 8th March, 2013 to 8th March, 2013; FSHN T101, Washington State University, Pullman, WA, USA. |
| 6 | " Best Practices On Quality Assurance In The Nigerian University System By The National Universities Commission", (Ebonyi State University), 4th March, 2012 to 6th March, 2012; Ebonyi State University, Abakaliki |