Dr. Iheoma Chigoziri Nwuzor

Dr. Iheoma Chigoziri Nwuzor is a READER in POLYMER AND TEXTILE ENGINEERING Department, Faculty Of Engineering in Nnamdi Azikiwe University

Dr. Iheoma  Chigoziri Nwuzor

Staff Profile

Engr. Dr. Iheoma Chigoziri Nwuzor (Iheoma Chigoziri Chukwujike) is a Lecturer and a Researcher at the Department of Polymer and Textile Engineering, Nnamdi Azikiwe University, Awka. Her research is focused on developing sustainable alternative sources to conventional raw materials where she has reported the synthesis of vinyl ester resins for coatings applications, effects of different natural fillers in numerous polymer systems, self-polishing anti-fouling coatings for marine environment and polymer composites in several peer-reviewed research papers in SCI journals. She is presently working on hybrid nanocomposite coatings reinforced with nanocellulose/nanoclay for multifunctional applications. Dr. Nwuzor is a Council for the Regulation of Engineering in Nigeria (COREN) registered Polymer Engineer. She has been Principal Investigator and Co-Investigator in several Nigeria Tertiary Education Trust Funded Research Projects.

Personal Information

Email:
Phone:
Address:
Polymer And Textile Engineering, Faculty Of Engineering, Nnamdi Azikiwe University, Awka.
Faculty/Unit:
FACULTY OF ENGINEERING
Department/Sub-Unit:
POLYMER AND TEXTILE ENGINEERING

Academic Qualifications

Degrees / Basic Certificates
1Federal University Of Technology, Owerri. (Doctor of Philosophy, May, 2017)
January, 2012 to May, 2017
Ph. D Polymer Science
2Federal University Of Technology, Owerri. (Master Degree, October, 2011)
January, 2008 to October, 2011
M. Sc Polymer Science And Engineering
3Federal University Of Technology, Owerri. (Bachelor Degree, May, 2005)
September, 1999 to June, 2004
B. Eng. Polymer And Textile Engineering Technology

Relevant/Working Experience

1Senior Lecturer, Nnamdi Azikiwe University, Awka
October, 2018 to Present
2Acting Head of Department,, Nnamdi Azikiwe University, Awka
October, 2017 to September, 2019
3Lecturer I, Nnamdi Azikiwe University, Awka
October, 2016 to September, 2018
4ICT Officer, Nnamdi Azikiwe University, Awka
September, 2016 to October, 2017
5Lecturer II, Nnamdi Azikiwe University, Awka
October, 2013 to September, 2016
6Assistant Lecturer, Nnamdi Azikiwe University, Awka
October, 2012 to September, 2013
7Industrial Production Officer, Imo State Government, Ministry Of Commerce And Industry
February, 2011 to February, 2012
8Research Assistant, Federal University Of Technology, Owerri
January, 2008 to February, 2012
9National Youth Service Corps (NYSC) Equipment Maintenance Officer, Isiala Mbano Local Government Council, Umuelemai
September, 2005 to September, 2006
10Industrial Trainee (Students Industrial Work Experience Scheme), West African Glass Industry (WAGI) Port-Harcout
September, 2003 to March, 2004
11Industrial Trainee (Students Industrial Work Experience Scheme), Amrud Industries Nigeria Limited, Owerri
October, 2002 to March, 2003
12(Students Industrial Work Experience Scheme), Cuduc Industries Limited, Mbano, Imo State
October, 2001 to March, 2002

Creative Output

Book Chapters
1Ezeala I. C., Nwuzor I. C.. (2016, March) Industrial Management Sunrise Printing Limited
2Ezeala I. C., Samuel C. E., Nwuzor I. C.. (2016, May) Industrial And Engineering Management Sunrise Printing Limited
Journal Articles
1Iheoma Chigoziri Nwuzor, Henry Chukwuka Oyeoka , Simeon Chukwudozie Nwanonenyi , Gina Odochi Ihekweme. (2023, January), "Biodegradation of low-density polyethylene film/plasticized cassava starch blends with central composite design for optimal environmental pollution control", Journal of Hazardous Materials Advances
2Iheoma Chigoziri Nwuzor, Chinomso Macanthony Ewulonu, Simeon Chukwudozie Nwanonenyi, Henry Chukwuka Oyeoka. (2023, February), "A Review on Emerging Advancements of Nanocellulose and Production Process in Food Packaging Applications", International Journal of Advanced Science and Engineering
3Iheoma Chigoziri Nwuzor⁎, Baba James Adinoyi, Chinenye Faith Okey-Onyesolu, Henry Chukwuka Oyeoka. (2023, June), "Hibiscus sabdariffa natural dye extraction process with central composite design for optimal extract yield", Sustainable Chemistry for the Environment
4Iheoma Chigoziri Nwuzor, Baba James Adinoyi, Chinomso Macanthony Ewulonu, Jeremiah Lekwuwa Chukwuneke, Echezona Nnaemeka Obika. (2022, December), "Combined Natural Dye Extractor and Dryer Fabrication Process", Journal of Materials Science Research and Reviews
5Idumah, C. I., Ezeani, O. E., Okonkwo, U. C., Nwuzor, I. C and Odera, S. R.. (2022, March), "Novel Trends in MXene/Conducting Polymeric Hybrid Nanoclusters.", Journal of Cluster Science, pp 1-32
6Nwuzor, I. C., Okolie, P. C., Ezeani, O. E and Nwanonenyi, S. C.. (2022, July), "Production of epoxidized cardanol-based vinyl ester resins with cinnamic acid for eco-friendly coating materials", Emergent Materials, pp 1-14
7Nwuzor, I. C., Chukwuneke, J. L., Ewulonu, C. M. and Okolie, P. C.. (2022, July), "Fabrication of cardanol thermosetting resin reinforced with cellulose nanofibril/expanded graphite nano-biocomposite", Industrial Crops and Products, Vol. 187, pp 1-16
8Idumah, C. I., Nwuzor, I. C., Odera, S. R., Timothy, U. J., Ngenegbo, U., & Tanjung, F. A.. (2022, September), "Recent advances in polymeric hydrogel nanoarchitectures for drug delivery applications", International Journal of Polymeric Materials and Polymeric Biomaterials,, pp 1-32
9Christopher Igwe Idumah, Iheoma C. Nwuzor and Raphael Stone Odera. (2021, February), "Recent Advances In Polymer Hydrogel Nanoarchitectures And Applications. Current Research In Green And Sustainable Chemistry", Current Research in Green and Sustainable Chemistry, Vol. 4, pp 100143
10Uzoma E. Enwerem, Henry C. Obasi, Genevive C. Onuegbu, Simeon C. Nwanonenyi & Iheoma C. Nwuzor. (2021, February), "Effect Of Surface Modification Of Cotton Weaves On The Mechanical And Morphological Properties Of Polyester Composites", The Journal of the Textile Institute, Vol. 113, (Issue 8), pp 1497—1508
11Gina Odochi Ihekweme, Ifenyinwa Ijeoma Obianyo, Kingsley Ikechukwu Orisekeh, Godwin Mong KaluUka, Iheoma C Nwuzor and Azikiwe Peter Onwualu. (2021, January), "Plasticity Characterization Of Certain Nigeria Clay Minerals For Their Application In Ceramic Water Filters", Science Progress, 104 (2) 1–13, Vol. 104, (Issue 2), pp 1-13
12Iheoma Chigoziri Nwuzor, Christopher Igwe Idumah, Simeon Chukwudozie Nwanonenyi & Obumneme Emmanuel Ezeani. (2021, January), "Emerging Trends In Self-polishing Anti-fouling Coatings For Marine Environment", Safety in Extreme Environments, Vol. 3, pp 9-25
13Iheoma Chigoziri Nwuzor Jeremiah Lekwuwa Chukwuneke Chinomso Macanthony Ewulonu and Paul Chukwulozie Okolie. (2021, January), "Development And Characterization Of Cardanol-Based Polymer Reinforced Fibre Bicomposites", International Journal of Trend in Scientific Research and Development, 3(5), 895- 904, Vol. 3, (Issue 5), pp 895-904
14Oyeoka, H. C., Ewulonu, C. M., Nwuzor, I. C., Obele, C. M. and Nwabanne, J. T.. (2021, February), "Packaging And Degradability Properties Of Polyvinyl Alcohol/Gelatin Nanocomposite Films Filled Water Hyacinth Cellulose Nanocrystals", Journal of Bioresources and Bioproducts, Elsevier,, Vol. 6, (Issue 2), pp 168-185
15Idumah, C. I., Ezeani, E. O. and Nwuzor, I. C.. (2021, June), "A Review: Advancements In Conductive Polymers Nanocomposites. POLYMER-PLASTICS TECHNOLOGY AND MATERIALS", Polymer-Plastics Technology and Materials, Vol. 60, (Issue 7), pp 756—783
16Nwuzor, I. C., Atuanya C. U. and Olisa O.. (2020, August), "Momordica Angustisepala Fibres And Ant Hill Particles/polyester Value-added Hybrid Composites For Bumper Application", World Journal of Engineering, Vol. 18, (Issue 1), pp 136-145
17S. C. Nwanonenyi, H. C. Obasi, M. U. Obidiegwu & I. C. Chukwujike. (2020, August), "Anticorrosion Response Of Polymer Mixture On Mild Steel In Hydrochloric Acid Environment", Emergent Materials, Springer, Vol. 3, (Issue 5), pp 663-673
18Christopher Igwe Idumah, Iheoma Nwuzor and Stone R. Odera. (2020, November), "Recent Advancements In Selfhealing Polymeric Hydrogels, Shape Memory, And Stretchable Materials", International Journal of Polymeric Materials and Polymeric Biomaterials, Vol. 70, (Issue 13), pp 942-966
19Gina Odochi Ihekweme, Josiah Ngenev Shondo, Kingsley Ikechukwu Orisekeh, Godwin Mong Kalu-Uka, Iheoma Chigoziri Nwuzor and Azikiwe Peter Onwualu. (2020, September), "Characterization Of Certain Nigerian Clay Minerals For Water Purification And Other Industrial Application", Heliyon (Elsevier), Vol. 6, (Issue 4), pp e03783
20Chinomso M. Ewulonu, Jeremiah L. Chukwuneke, Iheoma C. Nwuzor and Chinomso H. Achebe. (2020, May), "Fabrication Of Cellulose Nanofiber/polypyrrole/polyvinylpyrrolidoneaerogels With Box-Behnken Design For Optimal Electrical Conductivity", Carbohydrate Polymers, Elsevier. 225, Vol. 187, pp 115392
21Christopher Igwe Idumah and Iheoma C. Nwuzor. (2019, April), "Novel Trends In Plastic Waste Management", SN Applied Sciences, (Springer) 1-14, Vol. 1, (Issue 11), pp 1-14
22Atuanya Clement Uche, Olisa Olusola, Nwuzor Iheoma Chigoziri. (2019, July), "Modeling And Analysis Of Process Parameters Of Momordica Angustisepala Fibres And Ant Hill Particles/Polyester Hybrid Composites", Journal of Advancements in Material Engineering, Vol. 4, (Issue 3), pp 7-17
23Paul Chukwulozie Okolie, Iheoma Chigoziri Chukwujike, Jeremiah Lekwuwa Chukwuneke, Jude Ezechi Dara.. (2019, April), "Design And Production Of A Fish Feed Pelletizing Machine", Elsevier, Vol. 5, pp 1-7
24Chukwuneke, J. L., Ewulonu, M. C., Chukwujike, I. C. and Okolie, P. C.. (2019, November), "Physico-chemical Analysis Of Pyrolyzed Bio-oil From Swietenia Macrophylla (mahogany) Wood.", Heliyon (Elsevier), 5, 1-7
25S. C. Nwanonenyi, H. C. Obasi, I. C. Chukwujike, M. A. Chidiebere, E. E. Oguzie. (2019, September), "Inhibition Of Carbon Steel Corrosion In 1 M H2SO4 Using Soy Polymer And Polyvinylpyrrolidone", Chemistry Africa (Springer) 1-13., Vol. 2, (Issue 2), pp 277-289
26Okolie P. Chukwulozie, Obika E. Nnaemeka, Nwuzor I. Chigoziri. (2018, February), "Quality And Productivity Management", Proceedings of the World Congress on Engineering and Computer Science 2018, Vol. 2, pp 23-25, t. Proceedings of the World Congress on Engineering and Computer Science (WCECS 2018) 2, 23-25, 2018, San Francisco, USA
27Christopher Igwe Idumah, Azman Hassan, James Ogbu, J.U Ndem & Iheoma Chigoziri Nwuzor. (2018, March), "Recently Emerging Advancements In Halloysite Nanotubes Polymer Nanocomposites, Composite Interfaces.", Composite Interfaces, (Taylor and Francis). 26 (9), 751-826
28I. C. Nwuzor, J. L. Chukwuneke, S. C. Nwanonenyi and I. C. Uche. (2018, November), "Comparative Analysis On The Physico-Chemical And Mechanical Properties Of Agricultural Seeds Oil Modified Alkyd Resin.", Journal of Materials Science Research and Reviews, 1(3), 1-12
29J. L. Chukwuneke, I. C. Nwuzor, E. O. Anisiji and I. E. Digitemie. (2018, September), "Design And Fabrication Of A Dual Powered Baking Oven", Advances in Research, 16(4), 1-8
30Nwuzor, I. C., Chukwuneke, J. L., Nwanoneyi, S. C., Obasi, H. C. and Ihekweme, G. O.. (2018, March), "Modification And Physiochemical Characterization Of Kaolin Clay For Adsorption Of Pollutants From Industrial Paint Effluent.", European Journal of Advances in Engineering and Technology, 5(8), 609-620
31Chukwueneke J. L., Chukwujike I. C., Sinebe J. E., Ugwuegbu. (2018, June), "Effects Of Mycobacterium Tuberculosis Macrophage Interaction: Surface Energetic Mechanism", Covenant Journal of Engineering Technology (CJET) 2(1) 22-35.
32Chukwujike I. C., Chukwuneke J. L., Nwanonenyi S. C. & Digitemie I. E.. (2018, May), "Effect Of Particle Sized Clay Extender Pigment On Alkyd Paint Formulations", Covenant Journal of Engineering Technology (CJET), 1(1), 21-46
33Ogah, A. O. and Chukwujike, I. C.. (2017, April), "Physicomechanical Properties Of Agro Waste Filled High Density Polyethylene Bio-Composites", Journal of Institute of Polymer Engineers (JIPE), 1(2), 1-10
34S. C. Nwanonenyi, H. C. Obasi, E. E. Oguzie, I. C. Chukwujike and C. K. Anyiam. (2017, June), "Inhibition And Adsorption Of Polyvinyl Acetate (PVAc) On The Corrosion Of Aluminium In Sulphuric And Hydrochloric Acid Environment.", Journal of Bio-and Tribo-Corrosion, 3:53 DOI 10.1007/s40735-017-0114-z, Vol. 3, (Issue 4), pp 1-13
35S. C. Nwanonenyi, I. O. Arukalam, H. C. Obasi, U. L. Ezeamaku, I. O. Eze, I. C. Chukwujike and M. A. Chidiebere. (2017, April), "Corrosion Inhibitive Behavior And Adsorption Of Millet (Panicum Miliaceum) Starch On Mild Steel In Hydrochloric Acid Environment", Journal of Bio-and Tribo-Corrosion, 3:54 DOI 10.1007/s40735-017-0115-y, Vol. 3, (Issue 4), pp 1-11
36Henry Chinedu Obasi, Simeon Nwanonenyi, Innocent Eze, Iheoma Chukwujike, Chioma Anyiam, Felix Aguele and Kashif Ijaz. (2017, December), "Organic Solvents Transport Through Alkali-Treated Agro-waste Microfibre Incorporated With Low Density Polyethylene Composites", American Journal of Polymer Science and Technology, 3(4) 50-63.
37Ezeala, I. C. and Chukwujike, I. C. (2016, June), "International Maritime Organization (IMO) Regulations And Ships Sewage Disposal Systems", Journal of the Chartered Institute of Logistic and Transport-Nigeria, 2(5), 14-17
38Chukwujike, I. C., Igwe, I. O and Onyeagoro, G. N.. (2016, October), "Performance Evaluation Of Local ClayExtender Pigment On Alkyd Paint Formulations", International Journal of Modern Research in Engineering and Technology, 1(3), 30-41
39Uche, I. C. Chukwujike, I. C. & Nwanonenyi, S. C. (2016, September), "Synthesis, Characterization And Performance Evaluation Of Breadfruit Seed Oil Modified Alkyd Resin", European Journal of Advances in Engineering and Technology, 3(9),5-11
40Obasi, H. C., Aharanwa, B. C., Aguele, F. O., Uzoma, P. C., Nwapa, C., U. L. Ezeamaku, U. I. and Chukwujike, I. C.. (2016, February), "Solvent Transport Through Oil Palm Fibre Filled Low Density Polyethylene Composites", . Journal of Chemistry and Materials Research, 5 (1), 2-12
41Chukwujike, I. C and Igwe, I. O.. (2016, October), "Extender Properties Of Some Nigerian Clays", Journal of Minerals and Materials Characterization and Engineering, 4(5), 279-291
42Nwanonenyi, S.C, Madufor, Chukwujike, I. C. & Arinze, V.C.. (2016, September), "Experimental And Theoretical Studies Of Inhibitive Behaviour Of Millet Starch On The Corrosion Of Aluminium In Sulphuric Acid Environment", International Journal of Engineering and Technologies, 8, 1-13
43Nwanonenyi, S. C, Madufor, I. C., Uzoma, P. C. & Chukwujike, I. C.. (2016, February), "Corrosion Inhibition Of Mild Steel In Sulphuric Acid Environment Using Millet Starch And Potassium Iodide.", International Research Journal of Pure &Applied Chemistry, 12(2), 1-15.
44Chukwuneke, J. L., Azaka, O. A., Chukwujike, I. C. & Sinebe, J. E. (2016, April), "Optimization Of Waste Management System In Anambra State: A Case Study In Ifite-Awka", Journal of Engineering Research. 5(8), 138-151
45Ewulonu, C. M., Chukwujike, I. C. & U. J. Timothy. (2015, March), "Uptake Of Automobile Fluids By Dynamically Vulcanized Recycled Polyethylene/natural Rubber (rPE/NR) Biocomposites", Journal of Polymer and Biopolymer Physics Chemistry, 3(1), 19-27
46Iheoma C. Chukwujike, Chinomso M. Ewulonu, Nwanonenyi, S. C. & Ifeoma C. Uche. (2015, June), "Adsorption Treatment Of Industrial Paint Effluent For The Removal Of Pollutants By Local Clays", nternational Journal of Scientific & Engineering Research, 6(10), 690 – 703. ISSN: 2229-5518
47Iheoma C. Chukwujike, Chinomso M. Ewulonu, Nwanonenyi S. C. & Uche I. C. (2015, April), "Maleic Anhydride Graft-polyethylene Compatibilizer Effect On The Properties Of Chrysophyllum Albidum Seed Powder Filled High Density Polyethylene", Materials Science and Engineering, 3(2), 29-36., Vol. 3, (Issue 2), pp 29-36
48Iheoma C. Chukwujike, Stanley O. Nwakpa & Jerome, U. O.. (2015, June), "Studies On The Extender Properties Of Some Selected Local Clays In Nigeria", International Journal of Multidisciplinary Research and Development. 1(7), e-ISSN: 2349 – 4182., Vol. 2, (Issue 8), pp 161-168
49Iheoma C. Chukwujike, Chinomso M. Ewulonu & Mathew Chukwu. (2015, February), "Sorption Properties Of Carbonized/Uncarbonized Cornhub Powder Filled Natural Rubber/Arylonitrile Butadiene Rubber Bicomposite", International Journal of Multidisciplinary Research and Development. 1(7) e-ISSN: 2349 – 4182., Vol. 2, (Issue 8), pp 154-160
50Iheoma C. Chukwujike, Odo, J. U. & Gina Ihekweme. (2015, May), "Studies On The Mechanical Properties Of Carbonized And Uncarbonized Cornhub Powder Filled Natural Rubber/Acrylonitrile Butadiene Rubber Bicomposite", International Journal of Scientific and Research Publications, 5(4), ISSN: 2250 – 3153, Vol. 5, (Issue 4), pp ISSN 2250-3153
51Chinomso M. Ewulonu, Godwin N. Onyeagoro & Iheoma C. Chukwujike. (2014, February), "Transport Of N-hexane Through Carbonized Oil Palm Empty Fruit Bunch Powder Filled High Polypropylene/Natural Rubber Bicomposites", International Journal of Composite materials. 1(1), 4 – 13., Vol. 1, (Issue 1), pp 4-13
52Isaac O. Igwe & Chukwujike, I. C. (. (2012, January), "The Effect Of Maleic Anhydride-Graft-Polyethylene On The Mechanical Properties Of White Star Apple Seed Powder Filled High Density Polyethylene", Journal of Science and Technology Research. 11(3), 1-10., Vol. 11, (Issue 3), pp 153-175
Conference Papers
1Iheoma Nwuzor, Christopher Idumah, Paul Chukwulozie, Obumneme Ezean. (2020, June), "Production, Characterization And Performance Evaluation Of Cardanol Acetate In Alkyd Paints",
2Iheoma Nwuzor, Oyeoka Henry, and Chinomso Ewulonu. (2019, May), "Isolation Of Cellulose Nanocrystals From Water Hyacinth And Its Optimal Packaging Applications In Gelatin-PVA Films",
3Iheoma Nwuzor, Anselm Ogah and Chinomso Ewulonu. (2019, May), "Thermal, Mechanical Combustion And Morphological Properties Of High-Density Polyethylene/Ogranomodified Montmorillonite/Marula Seed Cake Nanocomposites",
4Okolie P. Chukwulozie, Obika E. Nnaemeka and Nwuzor I. Chigoziri.. (2018, February), "Quality And Productivity Management. Proceedings Of The World Congress On Engineering And Computer Science",
5Iheoma Chigoziri Nwuzor, Martin Emeka Ibenta and Gina Odochi Ihekweme. (2018, August), "Modification And Physiochemical Characterization Of Kaolin Clay For Adsorption Of Pollutants From Industrial Paint Effluent",
6Baba J. Adinoyi, Iheoma C. Nwuzor, Elizabeth O. Adinoyi, Josephine C. Dung. (2018, August), "Integrating Nigerian Forests With The Textile Industry For The Production Of Natural Dyes And Socio-Economic Development",
7. Nwuzor I. C., Chukwuneke J. L., Uche I. C. and Onoroh F. (2018, July), "Comparative Analysis On The PhysicoChemical And Mechanical Properties Of Agricultural Seeds Oil Modified Alkyd Resin",
8Agha N. O., Chukwuneke J. L., Nwuzor I. C.. (2018, July), "Mean Number Of Bosons And Fermions In A Potential Well",
9Chukwujike I. C., Ewulonu, C. M., Nwanonenyi, S. C. & Obasi, H.C.. (2017, October), "Effect Of Calcination Temperature Of Clays On It’s Extender Properties In Alkyd Paints",
10Nwanonenyi, S. C., Ogbobe, O., Obasi, H. C., Eze, I.O. and Chukwujike I. C.. (2017, October), "Synergistic Effect Of Carboxymethyl Cellulose And Polymeric Additives On Corrosion Inhibition Of Mild Steel In Acidic And Alkaline Environments",
11Chukwujike, I. C., Chukwuneke, J. L., Nwanonenyi, S. C. and Digitemie, I. E.. (2017, July), "Effect Of Particle Sized ClayExtender Pigment On Alkyd Paint Formulations",
12Chukwuneke J. L., Chukwujike I. C., Sinebe J. E. and Ugwuegbu, D. C.. (2017, July), "Surface Energetic Effects Of Human Immunodeficiency Virus Co-infection On Mycobacterium Tuberculosis - Macrophage Interaction Mechanism",
13Chukwujike, I. C. and Igwe, I. O. (2011, October), "Studies On The Properties Of White Star Apple Seed Powder Filled High Density Polyethylene",

Academic Leadership Qualities

Supervisions
1"Development of Water Hyacinth Cellulose Nano Crystals/Gelatin/Polyvinyl Alcohol Nanocomposites for Packaging Applications" (2021). Completed Masters project by Oyeoka Chukwuka Henry (2016386006F)
2"Development of Polyester/Anhill Particles and Momordica Angustisepala Fibres Hybrid Composites for Automobile Bumper Applications" (2021). Completed Masters project by Olisa Olushola Amudatu (2016386003F)
3"Design and Fabrication of Natural Dye Extractor/Dryer and Application of the Dye Extracts on Cotton/Polyester Blend Fabrics" (2023). Completed Masters project by Adinoyi Baba James (2017386001F)
4"Production of Carboxymethyl Cellulose and Cellulose Nanocrystals from Manihot Esculenta Stem for use in Textile Printing Ink." (2021). Completed Masters project by Ibenta Martin Emeka (2016386001F)
5"Cashew Exudate Hybrid Nanocomposite Self-healing Coatings" (2021). Ongoing Masters project by Ekweonu Chibuzor Daniel (2019386003PA)
Grants
1Awardee: "Development of Self-Polishing, Anti-Fouling Coatings System for Protection against Marine Growth and Ship's Hull Resistance" (July, 2017 to April, 2021). Completed sponsored grant by Tertiary Education Trust Fund (TETFund)
2Collaborator: "Analysis and Production of Bio-oil from Mahogany (Swietenia maerophylla) Wood for Internal Combustion Engines" (July, 2017 to June, 2019). Completed sponsored grant by Tertiary Education Trust Fund (TETFund)
3Collaborator: "Design, Production and Strength Improvement of Fish Feed Processing Machine" (July, 2017 to June, 2019). Completed sponsored grant by Tertiary Education Trust Fund (TETFund)
4Collaborator: "Development of Conductive Nanocellulose Paper System for Flexible Solar Cell" (May, 2016 to February, 2020). Completed sponsored grant by Tertiary Education Trust Fund (TETFund)
5Awardee: "Design and fabrication of natural dye extractor/dryer and application of the dye extract from roselle on cotton/polyester blend fabric" (August, 2022). Ongoing sponsored grant by Tertiary Education Trust Fund (TETFund)
Editorships
1Editor, "MECHANICAL PROPERTIES OF NATURAL RUBBER VULCANISATE FILLED WITH RICE HUSK POWDER" (October, 2021)
2Editor, "Numerical Evaluation of ABS Parts Fabricated by Fused Deposition Modelling and Vapour Smooting" (November, 2019)
Reviewerships
1Reviewer, "Numerical Evaluation of ABS Parts Fabricated by Fused Deposition Modelling and Vapour Smooting" (December, 2017)
2Reviewer, "Carbon-Carbon Nanostructured Composite Coatings with Controlled Structure" (March, 2016)
Examinerships
1Chief Examiner, "National And Higher National Diploma Examinations In Marine Engineering" (August, 2017 to August, 2020). Completed External Exam
Contributions to the University/Society
1Chairman, "Institute of Polymer Engineers (IPE)" (April, 2021)
2Member, "Committee on Faculty Business Ventures (FEG)" (July, 2021)
3PG Coordinator, "Departmental PG (Polymer and Textile Engineering)" (February, 2020)
4Chairman, "Institute of Polymer Engineers (IPE)" (June, 2017 to June, 2019)
5Member, "Institute of Polymer Engineers (IPE)" (June, 2017)
6Postgraduate Supervisor, "School of Postgraduate Studies (Unizik)" (October, 2017)
7Assistant Departmental ICT Officer, "Departmental ICT (Polymer and Textile Engineering)" (November, 2016 to October, 2017)
8Course Adviser for 100L Students, "Department of Polymer and Textile Engineering" (November, 2016 to October, 2017)

Relevant Events Attended

Conferences
1"Institute of Polymer Engineers (IPE) 2017 AGM/CONFERENCE", (Institute of Polymer Engineers), 4th October, 2017 to 7th October, 2017; National Engineering Centre, Central Business District, Abuja
2"Nigerian Society of Engineers (Awka Branch 17th Conference", (Nigerian Society of Engineers), 25th August, 2017 to 26th August, 2017; Awka
3"Polymer Institute of Nigeria 22nd Annual Technical Conference/AGM", (Polymer Institute of Nigeria), 26th October, 2011 to 29th October, 2011; Enugu
4"Council for the Regulation of Engineering in Nigeria", (Council for the Regulation of Engineers in Nigeria), International Conference Center, Abuja, Nigeria
5"Council for the Regulation of Engineering in Nigeria, 27th Engineering Assembly", (Council for the Regulation of Engineers in Nigeria), International Conference Center, Abuja, Nigeria
Workshops
1"African Engineering Education Association (AEEA) 3-Day Workshop on Capacity Building for Engineering and Technology Educatiors", (African Engineering Education Association), 18th May, 2015 to 20th May, 2015; University of Lagos Akoka, Lagos, Nigeria
2"Maritime Academy of Nigeria, Oron, a 3-Day Intensive Programme on Installation of Ballast Water Management", (Maritime Academy of Nigeria, Oron), Oron
3"Professional Leadership Practitioners Institute; a Two-Day Training Program", (Professional Leadership Practitioners Institute), Nnamdi Azikiwe University, Awka
4"Digital Bridge Institute, Advanced Digital Appreciation Programme for Tertiary Institutions (ADAPTI)", (Digital Bridge Institute, International Centre for Information and Communication Technology Studies), Nnamdi Azikiwe University, Awka
Seminar
1"Zinox Computers, a Training Program Leading to A+ Certification", (Zinox Computers), Owerri, Imo State
Other Events
1"Annual General Meeting And Conference On National Economic Diversification: The Role Of Polymer Engineers. Institute Of Polymer Engineers (IPE)", (Department of Mechanical Engineering, College of Engineering, Covenant University, Ota. Nigeria), 4th October, 2018 to 7th October, 2018; Covenant University, Ota
2"Faculty Of Engineering International Conference On Raw Materials Processing And Utilization For Sustainable Development, Nnamdi Azikiwe University, Awka Anambra State", (Faculty of Engineering, Nnamdi Azikiwe University, Awka), 13th August, 2018 to 14th August, 2018; Nnamdi Azikiwe University, Awka
3"2nd International Conference On Engineering For A Sustainable World", (Department of Mechanical Engineering, College of Engineering, Covenant University, Ota. Nigeria.), 3rd July, 2018 to 4th July, 2018; Ọta
4"International Conference On Engineering For A Sustainable World. Department Of Mechanical Engineering", (College of Engineering, Covenant University, Ota. Nigeria), 10th July, 2017 to 13th July, 2017; College of Engineering, Covenant University, Ota. Nigeria.
5"A 3-Day Workshop On Capacity Building For Engineering And Technology Educatiors, African Engineering Education Association (AEEA)", (University of Lagos Akoka, Lagos, Nigeria), 28th October, 2015 to 31st October, 2015; University of Lagos Akoka, Lagos, Nigeria
6"The 24th COREN Assembly. International Conference Center Abuja, Nigeria", (Council for the Regulation of Engineers in Nigeria), 10th August, 2015 to 12th August, 2015; International Conference Center, Abuja, Nigeria