Dr. Lekwuwa Jeremiah Chukwuneke
Dr. Lekwuwa Jeremiah Chukwuneke is a READER in MECHANICAL ENGINEERING Department, Faculty Of Engineering in Nnamdi Azikiwe University
|  |
Staff Profile
CHUKWUNEKE Jeremiah
Lekwuwa is a Ph.D holder in Mechanical Engineering (Thermal Power Engineering and Biomedical Engineering). He is currently the head of department of
Mechanical Engineering, Nnamdi Azikiwe University, Awka, Nigeria. He researches is on Renewable Alternative Energy
Resources, Harnessing and Utilization, Material Technology, Bioengineering, Computational
Analyses of Dynamical Energy Systems, Biocompatibility, Manufacturing etc. He
has authored many works including books, articles in reputable Journals and
chapters in books. He is COREN registered and he holds memberships of various
professional bodies like IAENG, IMechE, and ISDS. He is happily married and the
marriage is blessed with children. He's a trainer of quality and a smart
administrator.
Personal Information
Email: | |
Phone: | |
Address: | Mechanical Engineering, Faculty Of Engineering, Nnamdi Azikiwe University, Awka. |
Faculty/Unit: | FACULTY OF ENGINEERING |
Department/Sub-Unit: | MECHANICAL ENGINEERING |
Social Profiles
Interest Areas
Academic Qualifications
| Degrees / Basic Certificates | |
|---|---|
| 1 | Nnamdi Azikiwe University, Awka. (Doctor of Philosophy, April, 2016) April, 2013 to April, 2016 Ph.D Mechanical Engineering |
| 2 | Nnamdi Azikiwe University, Awka. (Master Degree, May, 2012) June, 2010 to May, 2012 M.Eng Mechanical Engineering |
| 3 | Nnamdi Azikiwe University, Awka. (Bachelor Degree, June, 2008) October, 2003 to June, 2008 B.Eng Mechanical/Production Engineering |
| 4 | Ojim's College, Rumuji. (SSCE, June, 2003) October, 1997 to June, 2003 |
| 5 | Amankalu Primary School, Alayi. (FSLC, July, 1997) October, 1991 to July, 1997 |
Relevant/Working Experience
| 1 | Ag. HOD, Nnamdi Azikiwe University February, 2021 to Present |
| 2 | Sabbatical Leave, Delta State University December, 2019 to November, 2020 |
| 3 | Senior Lecturer, Nnamdi Azikiwe University October, 2018 to Present |
| 4 | Lecturer I, Nnamdi Azikiwe University October, 2016 to September, 2018 |
| 5 | Lecturer II, Nnamdi Azikiwe University May, 2013 to September, 2016 |
| 6 | Assistant Lecturer, Nnamdi Azikiwe University May, 2012 to May, 2013 |
| 7 | Graduate Assistant, Nnamdi Azikiwe University January, 2012 to May, 2012 |
| 8 | SIWES, Nigerian National Petroleum Corporation (NNPC), Abuja July, 2007 to October, 2007 |
| 9 | SIWES, John Holt Engineering, Abuja June, 2007 to August, 2007 |
Creative Output
| Books | |
|---|---|
| 1 | Jeremiah Chukwuneke. (2021, July) Basic & Applied Thermodynamics FAB Educational Books, Awka, Nigeria |
| 2 | Obiora Emeka Anisiji, Chinonso Hubert Achebe, Jeremiah Lekwuwa Chukwuneke. (2017, February) Analysis Of A Commercial Thermophilic Biogas Plant LAP LAMBERT Academic Publishing, OmniScriptum GmbH & Co. KG, Saarbrucken, Germany |
| Journal Articles | |
| 1 | Peter Okechukwu Chikelu, Solomon Chuka Nwigbo, Obotowo William Obot, Paul Chukwulozie Okolie & Jeremiah L. Chukwuneke. (2023, January), "Modeling and simulation of belt bucket elevator head shaft for safe life operation", Scientific Reports, Vol. 13, pp 1083 |
| 2 | Chukwuneke J.L., Fakiyesi O.B., Obinani V.C., Okeke J.C. (2022, June), "Production and Thermal-Structural Analysis of Welding Face shield from Plantain Fibers Reinforced Polymer Matrix Composites", Int. J. of DARSHAN Inst. On Eng. Res. And Emer. Technol., Vol. 11, (Issue 1), pp 24-33 |
| 3 | Edafiadhe E.D., NwobiOkoye C.C., Madu K.E., Chukwuneke J.L.. (2022, September), "Predictive modeling for parametric analysis of an air conditioning system in a 400-seat auditorium in Warri, sub-tropical Nigeria", Journal of Engineering Research and Reports, Vol. 23, (Issue 5), pp 59-67 |
| 4 | J.L Chukwuneke, C.P Aniemene, P.C Okolie, C.M Obele, E.C Chukwuma. (2022, May), "Analysis of the dynamic of a freely falling body in a viscous fluid: computational fluid dynamics approach", International Journal of Thermofluids, Vol. 14, pp 1-14 |
| 5 | Iheoma Chigoziri Nwuzor, Jeremiah Lekwuwa Chukwuneke, Chinomso Macanthony Ewulonu, Paul Chukwulozie Okolie. (2022, July), "Fabrication of cardanol thermosetting resin reinforced with cellulose nanofibril/expanded graphite nano-biocomposites", Industrial Crops & Products, Vol. 187, pp 1-16 |
| 6 | Jeremiah Lekwuwa Chukwuneke, Jude Ebieladoh Sinebe, Henry Oghenero Orugba, Chinagorom Ajike. (2022, June), "Process Optimization for Enhancing Yield and Quality of Bio-oil from the Pyrolysis of Cow Hooves", International Journal of Design & Nature and Ecodynamics, Vol. 17, (Issue 3), pp 453-461 |
| 7 | J.L. Chukwuneke, M.I. Ndefo, J.E. Sinebe, S.M. Ofochebe. (2022, September), "Numerical and thermal analysis of mechanical properties degradations and distortions in steel weld joint", Cleaner Materials, Vol. 6, pp 1-10 |
| 8 | J.L. Chukwuneke, J.E. Sinebe, H.O. Orugba, H.C. Olisakwe & C. Ajike. (2022, September), "Production and physic-chemical characteristics of pyrolyzed bio-oil derived from cow hooves", Arab Journal of Basic and Applied Sciences, Vol. 29, (Issue 1), pp 363-371 |
| 9 | Henry Oghenero Orugba, Jeremiah Lekwuwa Chukwuneke, Henry Chukwuemeka Olisakwe, Innocent Eteli Digitemie. (2021, September), "Multi-parametric optimization of the catalytic pyrolysis of pig hair into bio-oil", Clean Energy, Vol. 5, (Issue 3), pp 527 – 535 |
| 10 | Iheoma Chigoziri Nwuzor, Jeremiah Lekwuwa Chukwuneke, Chinomso Macanthony Ewulonu, Paul Chukwulozie Okolie. (2021, April), "Development and Characterization of Cardanol-Based Polymer Reinforced Fibre Biocomposites", International Journal of Trend in Scientific Research and Development, Vol. 5, (Issue 3), pp 895 – 904 |
| 11 | J.L. Chukwuneke, H.O. Orugba, H.C. Olisakwe, P.O. Chikelu. (2021, October), "Pyrolysis of pig-hair in a fixed bed reactor: Physico-chemical parameters of bio-oil", South African Journal of Chemical Engineering, Vol. 38, pp 115–120 |
| 12 | S.C. Iweka, K.C. Owuama, J.L. Chukwuneke, O.A. Falowo. (2021, October), "Optimization of biogas yield from anaerobic co-digestion of corn chaff and cow dung digestate: RSM and Python approach", Heliyon, Vol. 7, pp 1-8 |
| 13 | Okpe Bernard Okechukwu, Chukwuneke Jeremiah Lekwuwa, Omenyi Sam Nna. (2021, January), "Implications Of Interfacial Energetics On The Tack/Debonding Of Single And Hybrid Pressure Sensitive Adhesives", International Journal of Scientific Research and Management, Vol. 9, (Issue 1), pp 546-555 |
| 14 | Chizoba May Obele, Martin Emeka Ibenta, Jeremiah Lekwuwa Chukwuneke, Simeon Chukwudozie Nwanonenyi. (2021, January), "Carboxymethyl Cellulose And Cellulose Nanocrystals From Cassava Stem As Thickeners In Reactive Printing Of Cotton", Cellulose |
| 15 | Chukwuneke J. L., Umeji A. C., Obika E. N., Fakiyesi O. B.. (2021, April), "Optimisation Of Composite Briquette Made From Sawdust / Rice Husk Using Starch And Clay Binder", INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, Vol. 13, (Issue 4), pp 208-216 |
| 16 | Achebe C H, Udeani F O, Obika E N, Chukwuneke J L. (2021, June), "Influence Of Interfacial Parameters On The Adhesion Of Aluminium On Mild Steel Using Pressure Sensitive Adhesives", Journal of Engineering and Applied Sciences, Vol. 18, (Issue 1), pp 366-380 |
| 17 | Okpe Bernard Okechukwu, Chukwuneke Jeremiah Lekwuwa, Omenyi Sam Nna. (2021, June), "Interfacial Bonding Energies Of Pressure Sensitive Adhesives To Substrates", Journal of Engineering and Applied Sciences, Vol. 18, (Issue 1), pp 393-399 |
| 18 | Chinomso M. Ewulonua, Jeremiah L. Chukwuneke, Iheoma C. Nwuzor, Chinonso H. Achebe. (2020, February), "Fabrication Of Cellulose Nanofiber/polypyrrole/polyvinylpyrrolidone Aerogels With Box-Behnken Design For Optimal Electrical Conductivity", Carbohydrate Polymers, Vol. 235, pp 1-9 |
| 19 | K.C. Nduaguba, J.L. Chukwuneke, S.N. Omenyi. (2020, June), "Hydrodynamic Drag Force On A Sphere Approaching A Liquid-liquid Interface", Heliyon, Vol. 6, pp 1-10 |
| 20 | Chukwuneke J. L., Umeji A. C., Sinebe J. E., Fakiyesi O. B.. (2020, April), "Optimization Of Composition Of Selected Biomass For Briquette Production", Universal Journal of Mechanical Engineering, Vol. 8, (Issue 4), pp 227-236 |
| 21 | Sinebe J. E, Chukwuneke J. L., Omenyi S. N.. (2020, June), "Strain-Rate Sensitivity Of Fiber-Reinforced Polymer Matrix", Journal of Engineering and Applied Sciences, Vol. 17, (Issue 1), pp 117-122 |
| 22 | EN Obika, CH Achebe, JL Chukwuneke, ON Ezenwa. (2020, July), "Effect Of Cane Wood And Palm Kernel Fibre Filler On The Compressive Strength And Density Of Automobile Brake Pad", Advances in Mechanical Engineering, Vol. 12, (Issue 7), pp 1-9 |
| 23 | Sinebe J. E., Chukwuneke J. L.2, Omenyi S. N.. (2020, May), "Understanding Fiber-Matrix Integrity In Fiber-Reinforced Polymer Composites From Strain Rate Sensitivity Concept", Universal Journal of Mechanical Engineering, Vol. 8, (Issue 5), pp 243-250 |
| 24 | Sinebe J. E., Chukwuneke J. L., Omenyi S. N.. (2019, January), "Implications Of Interfacial Energetics On Mechanical Strength Of Fiber Reinforced Polymer Matrix", International Journal of Materials Engineering, Vol. 9, (Issue 1), pp 1-7 |
| 25 | CH Achebe , JL Chukwuneke , FA Anene, CM Ewulonu. (2019, March), "A Retrofit For Asbestos-based Brake Pad Employing Palm Kernel Fiber As The Base Filler Material", Proc IMechE Part L: J Materials: Design and Applications, Vol. 233, (Issue 9), pp 1906–1913 |
| 26 | J.L. Chukwuneke , C.O. Izuka, S.N. Omenyi. (2019, June), "S-domain Stability Analysis Of A Turning Tool With Process Damping", Heliyon, Vol. 5, pp 1-12 |
| 27 | Paul Chukwulozie Okolie, Iheoma Chigoziri Chukwujike, Jeremiah Lekwuwa Chukwuneke, Jude Ezechi Dara. (2019, June), "Design And Production Of A Fish Feed Pelletizing Machine", Unknown Journal or Publisher, Vol. 5, pp 1-7 |
| 28 | CH Achebe , EN Obika, JL Chukwuneke, OI Ani. (2019, November), "Optimisation Of Hybridised Cane Wood–palm Fruit Fibre Frictional Material", Proc IMechE Part L: J Materials: Design and Applications, Vol. 233, (Issue 12), pp 2490–2497 |
| 29 | J.L. Chukwuneke, M.C. Ewulonu, I.C. Chukwujike, P.C. Okolie. (2019, September), "Physico-chemical Analysis Of Pyrolyzed Bio-oil From Swietenia Macrophylla (mahogany) Wood", Unknown Journal or Publisher, Vol. 5, (Issue 6), pp 1-7 |
| 30 | Achebe C. H. Nwagu I. A, Chukwuneke J. L, Sinebe J. E.. (2019, June), "Evaluation Of Frictional Heat And Oil Cooling Rate In Mechanical Contact Due To Debris Formation", Covenant Journal of Engineering Technology, Vol. 3, (Issue 1), pp 1-18 |
| 31 | Okolie Paul Chukwulozie, Oluwadare Benjamin Segun, Chukwuneke Jeremiah Lekwuwa, Ugwuegbu Duke Chiagoro. (2018, March), "Design Of Sewage Treatment Plant For CBN Housing Estate Trans-Ekulu Enugu Nigeria", Advances in Research, Vol. 13, (Issue 3), pp 1-18 |
| 32 | C. H. Achebe, A. C. Umeji, J. L. Chukwuneke. (2018, June), "Energy Evaluation Of Various Compositions Of Biomass Waste Briquettes", Advances in Research, Vol. 13, (Issue 6), pp 1-11 |
| 33 | Chukwujike I. C., Chukwuneke J. L., Nwanonenyi S. C., Digitemie I. E. (2018, March), "Effect Of Particle Sized Clay Extender Pigment On Alkyd Paint Formulations", Covenant Journal of Engineering Technology, Vol. 1, (Issue 1), pp 31-46 |
| 34 | Sam N. Omenyi, Ndukwe Okoro Agha, Jeremiah L. Chukwuneke. (2018, March), "Determination Of Entropy And Specific Heat Of Hydrogen From Partition Functions Of Elementary Particles", Covenant Journal of Engineering Technology, Vol. 1, (Issue 1), pp 86-104 |
| 35 | J. U. Ikekwem, J. L. Chukwuneke, S. N. Omenyi. (2018, March), "Thermal Behaviour Of Bone Cement In Hip Replacement", Physical Science International Journal, Vol. 17, (Issue 4), pp 1-14 |
| 36 | Chukwueneke J. L., Chukwujike I. C., Sinebe J. E., Ugwuegbu C. D.. (2018, June), "Effects Of Mycobacterium Tuberculosis Macrophage Interaction: Surface Energetic Mechanism", Covenant Journal of Engineering Technology, Vol. 2, (Issue 1), pp 22-35 |
| 37 | Nwuzor, I. C., Chukwuneke, J. L., Nwanoneyi, S. C., Obasi, H. C., Ihekweme, G. O.. (2018, August), "Modification And Physiochemical Characterization Of Kaolin Clay For Adsorption Of Pollutants From Industrial Paint Effluent", European Journal of Advances in Engineering and Technology, Vol. 5, (Issue 8), pp 609-620 |
| 38 | I. C. Nwuzor, J. L. Chukwuneke, S. C.Nwanonenyi, I. C. Uche. (2018, September), "Comparative Analysis On The Physico-Chemical And Mechanical Properties Of Agricultural Seeds Oil Modified Alkyd Resin", Journal of Materials Science Research and Reviews, Vol. 1, (Issue 3), pp 1-12 |
| 39 | J. L. Chukwuneke, I. C. Nwuzor, E. O. Anisiji, I. E. Digitemie. (2018, September), "Design And Fabrication Of A Dual Powered Baking Oven", Advances in Research, Vol. 16, (Issue 4), pp 1-18 |
| 40 | C. H. Achebe, S. Iweriolor, J. L. Chukwuneke. (2018, November), "Surface Energetics Study And Determination Of The Combined Negative Hamaker Coefficient For Hepatitis C Virus Infected Human Blood Cells", J. Biomedical Science and Engineering, Vol. 11, (Issue 11), pp 307-319 |
| 41 | (36) Chukwuneke L. Jeremiah, Achebe H. Chinonso, Sinebe E. Jude and Ugwuegbu C. Duke. (2017, November), "Surface Energetic Effects Of Human Immunodeficiency Virus Co-Infection On Mycobacterium Tuberculosis-Macrophage Interaction Mechanism", Journal of Applied Biotechnology & Bioengineering, Vol. 3, (Issue 6), pp 1-8 |
| 42 | C. H. Achebe, J. L. Chukwuneke, T. D. Otobo, P. S. Aguh. (2017, November), "Analysis Of Carbide Tool Wear Of EN38 Steel", Advances in Research, Vol. 5, (Issue 11), pp 1-11 |
| 43 | Okolie Paul Chukwulozie, Nwadike Emmanuel Chinagorom, Chukwuneke Jeremiah Lekwuwa and Nnodim Chiebuka Timothy. (2017, February), "THE ANALYSIS OF CIGARETTE PRODUCTION USING DOUBLE EXPONENTIAL SMOOTHING MODEL", Academic Journal of Science, Vol. 7, (Issue 2), pp 293–308 |
| 44 | Nwadike Emmanuel Chinagorom, Azaka Onyemazuwa Andrew, Okolie Paul Chukwulozie and Chukwuneke Jeremiah Lekuwa. (2017, February), "SURFACE RESPONSE OPTIMIZATION GCMS/FTIR ANALYSIS OF BIODIESEL PRODUCED FROM COW-TALLOW AND ITS BLEND WITH CONVENTIONAL DIESEL", Academic Journal of Science, Vol. 7, (Issue 2), pp 345–356 |
| 45 | Modo U. P, Chukwuneke J. L, Omenyi Sam. (2017, February), "Analyses Of Diamond - Shaped And Circular Arc Airfoils In Supersonic Wind Tunnel Airflows", International Journal of Engineering and Applied Sciences, Vol. 12, (Issue 1), pp 12-26 |
| 46 | Chukwuneke J. L., Ugwuegbu D. C., Sinebe J. E., Enyi L. C.. (2016, January), "Design Analysis And Applications Of A Regenerative Bicycle Ergometer", INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, Vol. 5, (Issue 1), pp 188-194 |
| 47 | J. L. Chukwuneke, P. C. Okolie, D. C. Ugwuegbu, J. E. Sinebe. (2016, March), "Design Analysis And Fabrication Of A Tensile Creep Testing Machine", British Journal of Applied Science & Technology, Vol. 14, (Issue 3), pp 1-13 |
| 48 | Chukwuneke J. L., Chukwuneke P. C., Okolie P. C., Sinebe J. E.. (2016, April), "Hamaker Coefficient Concept: The Application To The Mycobacterium Tuberculosis – Macrophage Interactions Mechanism", Advances in Bioscience and Bioengineering, Vol. 4, (Issue 1), pp 1-20 |
| 49 | Okolie Paul Chukwulozie, Oluwadare Benjamin Segun, Chukwuneke Jeremaih Lekwuwa, Nwadike Emmanuel Chinagorom. (2016, May), "Response Surface Optimization Of Production Mix Of Selected Raw Materials For Plastic Production", British Journal of Applied Science & Technology, Vol. 16, (Issue 5), pp 1-13 |
| 50 | Chukwuneke J.L, Azaka O.A., Chukwujike I. C., Sinebe J. E.. (2016, August), "Optimization Of Waste Management System In Anambra State: A Case Study Of Ifite-Awka", American Journal of Engineering Research, Vol. 5, (Issue 8), pp 138-151 |
| 51 | Achebe CH, Ohiafi BO, Chukwuneke JL, Obika EN. (2016, June), "Optimization Of Coolant Composition On Tool Wear During Turning Operation Of Mild Steel", Journal of Scientific and Engineering Research, Vol. 3, (Issue 6), pp 61-69 |
| 52 | J. L. Chukwuneke, J. E. Sinebe, D. C. Ugwuegbu, C. C. Agulonu. (2016, September), "Production By Pyrolysis And Analysis Of Bio-oil From Mahogany Wood (Swietenia Macrophylla)", British Journal of Applied Science & Technology, Vol. 17, (Issue 4), pp 1-9 |
| 53 | Achebe C. H, Ilogebe A. B, Chukwuneke J. L., Ezeanyim O. C.. (2015, August), "The Effects Of Inhibition On Corrosion Of Mild Steel In H2SO4 Using Ethanol Extract Of Vernonia Amygdalina", The International Journal Of Engineering And Science, Vol. 4, (Issue 8), pp 28-36 |
| 54 | Achebe C.H., Ilogebe A. B, Chukwuneke J. L., Azaka O. A., Ugwuegbu D. C.. (2015, October), "Mild Steel Corrosion Inhibition In H2SO4 Using Ethanol Extract Of Vernonia Amygdalina", The International Journal Of Engineering And Science, Vol. 4, (Issue 10), pp 01-09 |
| 55 | Okwuchukwu Ani, Adaeze Ani, Jeremiah Chukwuneke. (2015, August), "Spectrophotometric Data In Human Immunodeficiency Virus (HIV)-Antiretroviral Drug Coated Blood Interactions", Journal of Biosciences and Medicines, Vol. 3, pp 44-52 |
| 56 | Okolie Paul Chukwulozie, Chukwuneke Jeremiah Lekwuwa, Okoli Ndubuisi Celestine, Azaka Onyemazuwa Andrew, Sinebe Jude Ebieladoh. (2015, November), "Optimization Of The Production Mixture Of Selected Raw Material For Plastic Production: A Case Study Of Louis Carter Plastic Manufacturing Industry", American Journal of Engineering Research, Vol. 4, (Issue 11), pp 13-25 |
| 57 | Chukwuneke J. L., Achebe C. H., Omenyi S. N.. (2015, February), "Mycobacterium Tuberculosis (M-TB) - Human Sputum Interaction Mechanisms Energetics", International Journal of Biological Engineering, Vol. 5, (Issue 2), pp 23-30 |
| 58 | Chukwuneke J. L., Achebe C. H., Omenyi S. N.. (2015, March), "Surface Thermodynamics Approach To Mycobacterium Tuberculosis (MTB) – Human Sputum Interactions", Bioengineering & Biomedical Science, Vol. 5, (Issue 3), pp 1-8 |
| 59 | Chukwuneke J. L., Achebe C. H., Ejiofor O. S., Sinebe J. E.. (2015, December), "Surface Energ Etics Of Mycobacterium Tuberculosis Macrophage Interactions", JOURNAL OF BIOMEDI C AL ENGINE ERING AND MEDI CAL IMAGING, Vol. 2, (Issue 6), pp 49-61 |
| 60 | CHUKWUNEKE J. L., ACHEBE C. H., NWOSU M. C., Sinebe J. E.. (2014, July), "1 ANALYSIS AND SIMULATION ON EFFECT OF HEAD AND BUCKET SPLITTER ANGLE ON THE POWER OUTPUT OF A PELTON TURBINE", International Journal of Engineering and Applied Sciences, Vol. 5, (Issue 3), pp 1-8 |
| 61 | UJAM J. A., CHUKWUNEKE J. L., ACHEBE C. H., IKWU G. O. R.. (2014, July), "MODELLING THE EFFECT OF HEAD AND BUCKET SPLITTER ANGLE ON THE POWER OUTPUT OF A PELTON TURBINE", International Journal of Engineering and Applied Sciences, Vol. 5, (Issue 3), pp 26-36 |
| 62 | Chukwuneke J. L., Achebe C. H., Okolie P. C., Okwudibe H. A.. (2014, April), "Experimental Investigation On Effect Of Head And Bucket Splitter Angle On The Power Output Of A Pelton Turbine", International Journal of Energy Engineering, Vol. 4, (Issue 4), pp 81-87 |
| 63 | Okafor A. A., Achebe C. H., Chukwuneke J. L., Okolie P. C.. (2014, November), "Experimental Simulation And Optimization Of Performance Of Four Stroke Spark Ignition Injector Engine", International Journal of Scientific & Engineering Research, Vol. 5, (Issue 11), pp 167-173 |
| 64 | Okafor A. A., Achebe C. H., Chukwuneke J. L., Ozoegwu C. G.. (2014, September), "Modeling And Optimization Of Performance Of Four Stroke Spark Ignition Injector Engine", International Journal of Scientific & Engineering Research, Vol. 5, (Issue 9), pp 603-608 |
| 65 | Okolie Paul Chukwulozie, Okouzi Solomon Abhulimhen, Chukwuneke Jeremiah Lekwuwa, Sinebe Jude Ebieladoh. (2014, January), "Design And Development Of Materials Requirements Planning Simulation Model Using Visual Basic Programming Language", INTERNATIONAL JOURNAL OF MULTIDISCIPLINARY SCIENCES AND ENGINEERING, Vol. 5, (Issue 1), pp 11-24 |
| 66 | Okolie Paul Chukwulozie, Ezeliora Chukwuemeka Daniel, Chukwuneke Jeremiah Lekwuwa, Achebe Chinonso Hubert. (2014, February), "Statistical Analysis Of Processing Data For Premier Bread Industry Using Chi-Squared And Goodness-of- Fit Test", INTERNATIONAL JOURNAL OF MULTIDISCIPLINARY SCIENCES AND ENGINEERING, Vol. 5, (Issue 2), pp 1-11 |
| 67 | Ezeanyim Okechukwu C., Nwosu Moses C., Onwurah Uchendu O., Chukwuneke Jeremiah L.,. (2014, May), "A Comparative Analysis Of Cost Of Rework And Cost Of Conformance To Quality In Manufacturing Sector: A Case Study Of Aluminium Industry In Nigeria", International Journal of Material Science and Manufacturing Engineering, Vol. 41, (Issue 1), pp 1140-1146 |
| 68 | Nwadike Emmanuel Chinagoron, Ezeliora Chukwuemeka Daniel, Achebe Chukwunonso, Chukwuneke Jeremiah. (2014, September), "Optimization Of Production Of Biodiesel From Cow-tallow Using Response Surface Methodology", American Journal of Engineering, Technology and Society, Vol. 1, (Issue 4), pp 19-27 |
| 69 | Odio B. O., Chinwuko E. C., Chukwuneke J. L., Sinebe J. E.. (2014, July), "Investigation Of The Effect Of Corrosion On Mild Steel In Five Different Environments", INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, Vol. 3, (Issue 7), pp 306-310 |
| 70 | Anisiji O. E., Chukwuneke J. L., Achebe C. H., Okolie P. C.. (2014, July), "Integrated Process Modelling Of A Thermophilic Biogas Plant", INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, Vol. 3, (Issue 7), pp 334-341 |
| 71 | Chukwuneke J.L, Achebe C.H, Okolie P.C., Okafor E.A. (2013, May), "The Effect Of Variety And Drying On The Engineering Properties Of Fermented Ground Cassava", International Journal of Scientific Knowledge, Vol. 1, (Issue 5), pp 13-27 |
| 72 | Onoroh Francis, Chukuneke Jeremiah Lekwuwa, Itoje Harrison John. (2013, July), "Performance Evaluation Of A Thermoelectric Refrigerator", International Journal of Engineering and Innovative Technology, Vol. 2, (Issue 7), pp 18-24 |
| 73 | Onyenobi C. Samuel, Chukwuneke L. Jeremiah, Achebe H. Chinonso, Okolie C. Paul. (2013, April), "Biogas Production From Municipal Sewage Sludge Using Ultrasound Speeding Digestion Process", International Journal of Science and Engineering Investigations, Vol. 2, (Issue 15), pp 109-118 |
| 74 | Jeremiah L. Chukwuneke, Chinonso H. Achebe, Paul C. Okolie, Obiora E. Anisiji. (2013, April), "Modelling Of Electromechanical Control Of Camless Internal Combustion Engine Valve Actuator", International Journal of Science and Engineering Investigations, Vol. 2, (Issue 15), pp 123-136 |
| 75 | Nwigbo Solomon C., Azaka Onyemazuwa A., Chukwuneke Jerimiah L., Nwadike Chinagorom E.. (2013, August), "Establishing Allometric Relationships Using Crown Diameter For Estimating Above Ground Combustible Fuels In Southern Nigerian Mangrove Vegetations", INTERNATIONAL JOURNAL OF MULTIDISCIPLINARY SCIENCES AND ENGINEERING, Vol. 4, (Issue 7), pp 43-52 |
| 76 | Chukwuneke J. L., Achebe C.H., Okolie P. C., Okonkwo U. C.. (2013, August), "Statistical Thermodynamics Approach To Urinary Analysis Employing Micro-Canonical Ensemble", INTERNATIONAL JOURNAL OF MULTIDISCIPLINARY SCIENCES AND ENGINEERING, Vol. 4, (Issue 7), pp 60-64 |
| 77 | Chukwuneke Jeremiah Lekwuwa, Achebe Chinonso Hubert, Okolie Paul Chukwulozie, Ajike Chinagorom Ogbu. (2012, May), "An Application Of Statistical Thermodynamics To An Open Flow System", International Journal of Scientific & Engineering Research, Vol. 3, (Issue 5), pp 1-6 |
| 78 | Chwukwuneke J.L., Achebe C.H., Okolie P.C., Chukwumuanya E.O.. (2012, May), "Analysis Of A Laboratory Bicycle Ergometer System Using Grand Canonical Ensemble", INTERNATIONAL JOURNAL OF MULTIDISCIPLINARY SCIENCES AND ENGINEERING, Vol. 3, (Issue 5), pp 58-65 |
| 79 | Chinwuko C.E., Chukwuneke J.L., Okolie P.C., Dara E.J.. (2012, June), "Modeling And Optimization Of Electricity Distribution Planning System Using Dynamic Programming Techniques: A Case Of Power Holding Company Of Nigeria (PHCN)", INTERNATIONAL JOURNAL OF MULTIDISCIPLINARY SCIENCES AND ENGINEERING, Vol. 3, (Issue 6), pp 39-46 |
| 80 | Anisiji E. O., Achebe C. H., Chukwuneke J. L., Okolie P. C.. (2012, October), "A Mathematical Model Of A Commercial Thermophilic Biogas Plant", International Journal of Mechanical Engineering, Vol. 40, (Issue 10), pp 343-349 |
| 81 | Mba E.F., Chukwuneke J.L., Achebe C.H., Okolie P.C.. (2012, October), "Modeling And Simulation Of A Photovoltaic Powered Vapour Compression Refrigeration System", Journal of Information Engineering and Applications, Vol. 2, (Issue 10), pp 1-15 |
| 82 | Chukwuneke Jeremiah Lekwuwa, Ajike Chinagorom Ogbu, Achebe Chinonso Hubert, Okolie Paul Chukwulozie. (2012, November), "A Mathematical Model Of An Evaporative Cooling Pad Using Sintered Nigerian Clay", Journal of Minerals and Materials Characterization and Engineering, Vol. 11, pp 1113-1120 |
| 83 | Chigbogu C. Ozoegwu, Chigozie F. Uzoh, Jeremiah L. Chukwuneke, Paul C. Okolie. (2012, June), "Chatter Stability Characterization Of A Three-Flute End-Miller Using The Method Of Full-Discretization", International Journal of Mechanics and Applications, Vol. 2, (Issue 6), pp 143-151 |
| 84 | Ozoegwu C.G, Omenyi S.N, Achebe C.H, Chukwuneke J.L.. (2012, November), "Chatter Stability Characterization Of A Plastic End-Milling CNC Machine", Innovative Systems Design and Engineering, Vol. 3, (Issue 11), pp 17-28 |
| Conference Papers | |
| 1 | Jeremiah Lekwuwa Chukwuneke, Chinedu Okpalaibekwe Izuka, Sam Nna Omenyi. (2019, August), "Effects Of Process Damping On S-domain Stability Analysis Of A Turning Tool", AIP Conference Proceedings, Vol. 2138, pp 030012-1–030012-6 |
| 2 | J.E. Sinebe, J. L. Chukwuneke, S. N. Omenyi. (2019, December), "Surface Energetics Effects On Mechanical Strength Of Fibre Reinforced Polymer Matrix", Journal of Physics: Conference Series, Vol. 1378, pp 1-8 |
| 3 | Nwabanne J. O., Chukwuneke J. L., Omenyi S. N.. (2019, September), "Non-Linear Finite Element Approach To Aerodynamic Effects On Horizontal Taut Cable", Journal of Physics: Conference Series, Vol. 1378, pp 1-14 |
| 4 | Chukwuneke J. L., Ikekwem J. U., Okokpujie I. P., Ongbali S. O.. (2019, September), "Evaluation Of Heat Transfer On Bone Cemented Hip Replacement", Journal of Physics: Conference Series, Vol. 1378, pp 1-13 |
| 5 | C. G. Ozoegwu, J.L. Chukwuneke, I.P. Okokpujie, K. O. Babaremu. (2019, September), "STABILIZING WAVE ATTENUATION EFFECTS IN HIGH-SPEED METAL CUTTING", Journal of Physics: Conference Series, Vol. 1378, pp 1-6 |
| 6 | F. Onoroh, M. Ogbonnaya, J. L. Chukuneke, C. B. Echeta. (2018, September), "Thermal Optimization Of Heat Sink For Inverter Applications", IOP Conf. Series: Materials Science and Engineering, Vol. 413, pp 1-10 |
Academic Leadership Qualities
| Supervisions | |
|---|---|
| 1 | "Effect of Particulates Contents on the Structure, Mechanical and Thermal Properties of Irvingia wombolu Reinforced Al-10wt%Zn Based Alloy Composite" (2021). Completed Masters project by Umahi Justice Chidi (2018246018F) |
| 2 | "Thermal and Mechanical Analysis of Steel Weld to Quantify Degradation of Mechanical Properties and Distortion in Steel Welded Workpiece" (2021). Completed Masters project by Ndefo Michael Ikechukwu (2018246005F) |
| 3 | "Parametric Analysis of the Effects of Relative Humidity and Ambient Conditions on Gas Turbine Performance" (2021). Completed Masters project by Okechi Lubee Emeana (2018246013F) |
| 4 | "Analysis of the Dynamics of A Freely Falling Body in a Viscous Fluid" (2022). Completed Masters project by Aniemene Chidiebere Patrick (2018246004F) |
| 5 | "Hydrodynamic Drag Force on A Sphere Approaching A Liquid-Liquid Interface" (2021). Completed Masters project by Nduaguba Kelvin Chinedu (2013246004F) |
| 6 | "Production of Automobile Brake Pad using a Hybrid of Natural Fibres" (2019). Completed Masters project by Obika Echezona Nnaemeka (2015246007F) |
| 7 | "S-Domain Stability Analysis of A Turning Tool with Process Damping" (2019). Completed Masters project by Izuka Chinedu Okpalaibekwe (2011246033P) |
| 8 | "Thermal Behaviour of Bone Cement in Hip Replacement" (2018). Completed Masters project by Ikekwem Jude Uzonwanne (2014246016F) |
| 9 | "Energy Evaluation of Various Compositions of Biomass Waste Briquettes" (2018). Completed Masters project by Umeji Anthony Chukwuemeka (2014246005F) |
| Grants | |
| 1 | Awardee: "TetFund Institutional Based Research (IBR)" (December, 2021 to August, 2022). Completed sponsored grant by TetFund |
| 2 | Awardee: "Physico-Chemical Analysis of Pyrolyzed Bio-oil from Swietenia Macrophylla (Mahogany) Wood" (February, 2019 to January, 2020). Completed sponsored grant by TetFund |
| 3 | Collaborator: "Design, Production and Strength Improvement of Fish Feed Processing Machine" (February, 2019 to January, 2020). Completed sponsored grant by TetFund |
| 4 | Collaborator: "Development of Automobile Brake Pad using Locally Sourced Hybrid Fibre Materials" (March, 2018 to January, 2020). Completed sponsored grant by TetFund |
| 5 | Collaborator: "Thermo-Mechanical and Microstructural Analysis of Steel Weldment" (July, 2022). Ongoing sponsored grant by TetFund |
| 6 | Collaborator: "TetFund Institutional Based Research (IBR)" (August, 2022). Ongoing sponsored grant by TetFund |
| 7 | Collaborator: "TetFund Institutional Based Research (IBR)" (August, 2022). Ongoing sponsored grant by TetFund |
| 8 | Collaborator: "TetFund Institutional Based Research (IBR)" (December, 2021). Ongoing sponsored grant by TetFund |
| Editorships | |
| 1 | Editor, "Journal of Engineering and Applied Sciences" (May, 2021) |
| 2 | Editor, "International Journal of Advanced Trends in Automotive Technology & Management" (February, 2017) |
| 3 | Editor, "Asian Journal of Engineering and Applied Technology" (July, 2016) |
| 4 | Editor, "Asian Journal of Applied Science and Technology" (April, 2016) |
| 5 | Editor, "Nanomedicine and Nonoscience Research" (June, 2016) |
| Reviewerships | |
| 1 | Reviewer, "International Journal of Research and Scientific Innovation" (May, 2021) |
| 2 | Reviewer, "Chemical Science International Journal" (January, 2020) |
| 3 | Reviewer, "Journal of Advances in Mathematics and Computer Science" (January, 2020) |
| 4 | Reviewer, "Journal of Applied Physical Science International" (June, 2018) |
| 5 | Reviewer, "Open Engineering" (October, 2017) |
| 6 | Reviewer, "Science Domain International" (September, 2014) |
| Accreditation Panel Memberships | |
| 1 | COREN Representative/Chairman, "National Board for Technical Education (NBTE): ND/HND Mechanical Engineering Tech., Lagos State Polytechnic, Ikorodu, Lagos State" (September, 2018) |
| 2 | COREN Representative/Chairman, "National Board for Technical Education (NBTE): ND Mechatronics Engineering Tech., Federal Polytechnic, Oko, Anambra State" (March, 2016) |
| Contributions to the University/Society | |
| 1 | Workshop Manager, Faculty of Engineering, "Nnamdi Azikiwe University, Awka" (February, 2022) |
| 2 | Union Electoral Commission (UNECO)/Member, "Nnamdi Azikiwe University, Awka" (April, 2021 to May, 2022) |
| 3 | ISP MEntorship, "Nnamdi Azikiwe University, Awka" (August, 2021) |
| 4 | Pre-Science Monitor/Committee Member, "Nnamdi Azikiwe University, Awka" (February, 2020) |
| 5 | Consultant, "Scarlet Oil & Gas Limited" (July, 2019) |
| 6 | Collation Officer, "Independent National Electoral Commission (INEC)" (February, 2019) |
| 7 | Committe on Migration Sensitization Programme/Member, "Nnamdi Azikiwe University, Awka" (August, 2018) |
| 8 | Departmental ICT Officer, "Nnamdi Azikiwe University, Awka" (May, 2017 to February, 2021) |
| 9 | Coordinator Faculty Course, "Nnamdi Azikiwe University, Awka" (November, 2017) |
| 10 | Member Faculty Exam Misconduct Committee, "Nnamdi Azikiwe University, Awka" (March, 2017 to March, 2019) |
| 11 | Member Faculty Committee for Foundation Courses, "Nnamdi Azikiwe University, Awka" (February, 2017) |
| 12 | Member Faculty Welfare Committee, "Nnamdi Azikiwe University, Awka" (February, 2017 to February, 2019) |
| 13 | CEP Lecture Monitor, "Nnamdi Azikiwe University, Awka" (August, 2016 to February, 2021) |
| 14 | Departmental Librarian, "Nnamdi Azikiwe University, Awka" (December, 2015 to February, 2021) |
| 15 | Member Curriculum Committee, "Nnamdi Azikiwe University, Awka" (December, 2015 to February, 2021) |
| 16 | Departmental SIWES Coordinator, "Nnamdi Azikiwe University, Awka" (November, 2012 to February, 2021) |
| 17 | Departmental Academic Staff Adviser/Year 2, "Nnamdi Azikiwe University, Awka" (November, 2012 to February, 2021) |
| 18 | Departmental Timetable Officer, "Nnamdi Azikiwe University, Awka" (November, 2012 to February, 2021) |
| 19 | Departmental Property Officer, "Nnamdi Azikiwe University, Awka" (November, 2012 to December, 2015) |
Membership of Professional/Relevant Bodies
| 1 | Associate Member, "International Society for Development and Sustainability (ISDS)" - 1500991 (member since 2014), https://www.isdsnet.com/membership.html |
| 2 | Full Member, "Council for the Regulation of Engineering in Nigeria (COREN)" - R.23,992 (member since 2012), https://www.coren.gov.ng |
| 3 | Full Member, "International Association of Engineers" - 112734 (member since 2011), https://www.iaeng.org |
Relevant Events Attended
| Conferences | |
|---|---|
| 1 | "3oth Engineering Assembly", (Council for the Regulation of Engineering in Nigeria (COREN)), 8th August, 2022 to 10th August, 2022; International Conference Center Abuja |
| 2 | "29th Engineering Assembly", (Council for the Regulation of Engineering in Nigeria (COREN)), 9th August, 2021 to 11th August, 2021; International Conference Center, Abuja |
| 3 | "28th Engineering Assembly", (Council for the Regulation of Engineering in Nigeria (COREN)), 19th August, 2019 to 21st August, 2019; International Conference Center, Abuja |
| 4 | "3rd International Conference On Engineering For A Sustainable World (ICESW2019)", (Covenant University Ota), 3rd July, 2019 to 5th July, 2019; Covenant University, Ota |
| 5 | "4th Innovation And Analytic Conference And Exhibition (IACE2019)", (Universiti Utara Malaysia), 25th May, 2019 to 28th May, 2019; UUM Sintok, Kedah Malaysia |
| 6 | "2018 Faculty Of Engineering Internationl Conference On Raw Materials Processing And Utilization For Sustainable Development", (Faculty of Engineering, Nnamdi Azikiwe University, Awka), 14th August, 2018 to 15th August, 2018; NAU, Awka |
| 7 | "2nd International Conference On Engineering For A Sustainable World (ICESW2018)", (Covenant University Ota), 9th July, 2018 to 13th August, 2018; Covenant University, Ota |
| 8 | "27th Engineering Assembly", (Council for the Regulation of Engineering in Nigeria (COREN)), 8th June, 2018 to 8th August, 2018; International Conference Center, Abuja |
| 9 | "26th Engineering Assembly", (Council for the Regulation of Engineering in Nigeria (COREN)), 7th August, 2017 to 9th August, 2017; International Conference Center, Abuja |
| 10 | "International Conference On Engineering For A Sustainable World (ICESW2017)", (Covenant University Ota), 3rd July, 2017 to 7th July, 2017; Covenant University, Ota |
| 11 | "2014 National Conference On Engineering For Sustainable Development", (Faculty of Engineering, Nnamdi Azikiwe University, Awka), 12th June, 2014 to 13th June, 2014; NAU, Awka |
| 12 | "2012 National Conference On Infrastructural Development And Maintenance In Nigerian Environment", (Faculty of Engineering, Nnamdi Azikiwe University, Awka), 22nd August, 2012 to 23rd August, 2012; NAU, Awka |
| Workshops | |
| 1 | "Automechanika & IMI Training 2019", (Nigerian Institute of Mechanical Engineers (NImechE2019)), 9th June, 2019 to 15th June, 2019; Dubai, UAE |
| 2 | "Workshop on Academic Writing and Publishing", (Enago Academy), 15th December, 2017 to 15th December, 2017; NAU, Awka |
| 3 | "2016 Postgraduate Research Workshop: Train the Trainers", (School of Postgraduate Studies, Unizik), 31st October, 2016 to 24th November, 2016; NAU, Awka |
| 4 | "Workshop On High Profile Grant Oriented Proposals-Writing And Research Management", (Ekwueme Center for Multidisciplinary Research (ECMR) in Collaboration with Centre for Health and Allied Legal and Demographical Development Research and Training (CHALADDRAT), NAU), 26th May, 2015 to 27th May, 2015; NAU, Awka |