Dr. Chukwulozie Paul. Okolie
Dr. Chukwulozie Paul. Okolie is a READER in MECHANICAL ENGINEERING Department, Faculty Of Engineering in Nnamdi Azikiwe University
|  |
Staff Profile
Engr Dr Paul Chukwulozie Onyeabor Okolie is a researcher/ lecturer in the Department of Mechanical Engineering, Nnamdi Azikiwe University, Awka, Anambra State, Nigeria. His research interests cover Mechanical Engineering Design,Manufacturing Technology,Industrial Production and application of statistical tools/Models in solving Manufacturing and Production Problems in Industries and Society at large.He is gentle, pure in heart and willing to collaborate with researchers all over the world in any area.
Personal Information
Email: | |
Phone: | |
Address: | Mechanical Engineering, Faculty Of Engineering, Nnamdi Azikiwe University, Awka. |
Faculty/Unit: | FACULTY OF ENGINEERING |
Department/Sub-Unit: | MECHANICAL ENGINEERING |
Social Profiles
Interest Areas
Academic Qualifications
| Degrees / Basic Certificates | |
|---|---|
| 1 | University Of Benin, Edo State. (Doctor of Philosophy, July, 2019) July, 2015 to March, 2019 Ph.D. Industrial Engineering |
| 2 | Usmanu Danfodiyo University Sokoto. (Post-Graduate Degree, March, 2010) March, 2008 to March, 2010 PGDE Education |
| 3 | Nnamdi Azikiwe University, Awka. (Master Degree, January, 2010) January, 2008 to January, 2010 M.Eng Industrial Production Engineering |
| 4 | City College Okigwe. (SSCE, June, 2005) May, 2005 to June, 2005 WAEC |
| 5 | Nnamdi Azikiwe University, Awka. (Bachelor Degree, October, 2004) October, 2000 to October, 2004 B.Eng Mechanical/Production Engineering |
| 6 | Akanu Ibiam National Polytechnic Unwana, Ebonyi State. (OND, April, 1999) October, 1996 to April, 1999 ND Mechanical Engineering Technology |
| 7 | Holy Ghost Secondary Technical School, Umuahia. (SSCE, June, 1993) September, 1987 to June, 1993 WAEC |
| 8 | Aro Amuro Okigwe Central. (FSLC, September, 1988) September, 1988 to September, 1988 FSLC |
Relevant/Working Experience
| 1 | Reader, Nnamdi Azikiwe University Awka October, 2022 to October, 2025 |
| 2 | SENIOR LECTURER, NNAMDI AZIKIWE UNIVERSITY AWKA, ANAMBRA STATE. October, 2019 to September, 2022 |
| 3 | LECTURER 1, NNAMDI AZIKIWE UNIVERSITY AWKA, ANAMBRA STATE. October, 2015 to September, 2019 |
| 4 | LECTURER 2, NNAMDI AZIKIWE UNIVERSITY AWKA, ANAMBRA STATE. October, 2012 to September, 2015 |
| 5 | ASSISTANT LECTURER, NNAMDI AZIKIWE UNIVERSITY AWKA, ANAMBRA STATE. October, 2011 to October, 2012 |
Creative Output
| Journal Articles | |
|---|---|
| 1 | Nwokeocha Tochukwu Obialo, Paul Chukwulozie Okolie, Calistus Princewill Odeh, Chibuzo Ndubuisi Okoye, Madumere Augustine Uzodinma. (2025, April), "Firing Temperature Effect on the Thermo-structural Properties of Clay for Refractory Purposes: A Comparative Study on Nigerian Clay Deposits", BirEx Journal, Vol. 7, (Issue 2), pp 92-105 |
| 2 | Daniel Nwankwo, Paul Chukwulozie Okolie, Augustine Uzodinma Madumere, Ugochukwu Chuka Okonkwo, Chibuzo Ndubuisi Okoye. (2025, February), "Development of Engineering Material Selection Computer Package for Enhanced Decision Making", Budapest International Research and Critics Institute-Journal (BIRCI-Journal), Vol. 8, (Issue 1), pp 95-112 |
| 3 | Kingsley C Nnakwo, Jeremiah L Chukwuneke and Paul C Okolie. (2024, July), "Development of High Strength and Super Electrical Conductive Cu-3Ti-2Si-1.5NixNb Alloys", International Journal of Nanomaterials, Nanotechnology and Nanomedicine, Vol. 10, (Issue 2), pp 068-072 |
| 4 | Kingsley C Nnakwo, Jeremiah L Chukwuneke, Paul C Okolie, Chika O Ujah and Maxwell C Anukwonke. (2024, July), "Stress-Strain Characteristics and Electrical Conductivity of Niobium Nanopowder Modified Silicon Bronze", Global Journal of Biotechnology and Biomedical Science, Vol. 10, (Issue 1), pp 011-015 |
| 5 | Paul C Okolie., Chidume N Nwambu and Unegbu Chukwudi. (2024, August), "Flexural Behaviors of Bamboo Fibre and Mangifera Indica Particulate Epoxy Resin Composite", Advance Journal of Science, Engineering and Technology, Vol. 9, (Issue 8), pp 70-78 |
| 6 | Benjamin Segun Oluwadare, Paul Chukwulozie Okolie and Samson Adedayo Adeleye. (2024, May), "Effect of Tin Addition on the Mechanical Properties and Microstructure of Aluminium Bronze Alloyed with 4% Nickel", European Journal of Theoretical and Applied Sciences, Vol. 2, (Issue 3), pp 3-17 |
| 7 | Okolie P. C., Ezenwa O. N., Nnakwo K. C. and Wogu S. N.. (2024, July), "Design and Production of Bitter Leaf Washing Machine for Small and Medium Scale Bitter Leaf Processing", Unizik Journal of Technology, Production and Mechanical Systems, Vol. 3, (Issue 1), pp 128-135 |
| 8 | Agomuo C. C., Okolie C. P., Azaka A. O. and Nwambu C. N. (2024, September), "Wear Resistance and Tensile Behaviours of Bamboo Fibre and Mangifera Indica Particulate Epoxy Resin Composite", UNIZIK Journal of Engineering and Applied Sciences, Vol. 3, (Issue 3), pp 1037-1046 |
| 9 | Benjamin Segun Oluwadare, Paul Chukwulozie Okolie, David Ojo Akindele, Oluwafemi Festus Olaiyapo, Ayobami Phillip Akinsipe and Oku Ekpenyong Nyong. (2024, March), "Transition to Turbulence of a Laminar Flow Accelerated to a Statistically Steady Turbulent Flow", European Journal of Theoretical and Applied Sciences, Vol. 2, (Issue 2), pp 928-943 |
| 10 | OKOLIE PAUL CHUKWULOZIE, ENYI CHUKWUDI LOUIS, OLUWADARE BENJAMIN SEGUN, CHIKELUE EDWARD OCHIAGHA. (2023, September), "DESIGN AND FABRICATION OF A MASS BALANCING MACHINE", International Journal of Novel Research in Electrical and Mechanical Engineering, Vol. 11, (Issue 1), pp 35-46 |
| 11 | OKOLIE PAUL CHUKWULOZIE, CHIDUME NNAMDI NWAMBU, OBIORA NNAEMEKA EZENWA, OKOLIE UCHENNA ONYEBUCHI, CHIKELUE EDWARD OCHIAGHA. (2023, September), "THERMO-MECHANICAL PROPERTIES AND MICROSTRUCTURAL CHARACTERIZATION OF WELDED STEEL PLATES", International Journal of Novel Research in Engineering and Science, Vol. 10, (Issue 2), pp 60-64 |
| 12 | AGUH PATRICK SUNDAY, OKOLIE PAUL CHUKWULOZIE, CHUKWUNEKE JEREMIAH LEKWUWA, NWOKEOCHA TOCHUKWU OBIALO, EZENWA OBIORA NNAEMEKA. (2023, September), "DESIGN AND FABRICATION OF A MOVABLE PALM KERNEL CRACKING MACHINE FOR RURAL APPLICATION", International Journal of Novel Research in Engineering and Science, Vol. 10, (Issue 2), pp 65-76 |
| 13 | Paul Chukwulozie Okolie, Sylvester Emeka Abonyi, Onyedikachukwu Hannah Ifeabunike and Oluwadare Benjamin Segun. (2023, July), "Potential of Municipal Solid Waste Fuel in Awka for Energy Generation", International Journal of Electrical and Telecommunication Systems Research, Vol. 11, (Issue 11), pp 57-63 |
| 14 | Okolie Paul C., Sylvester Emeka Abonyi, Okolie Uchenna Onyebuchi and Chikelue Edward Ochiagha. (2023, September), "Steel Work Design and Analysis of a Manual Lawn Mower", International Journal of Novel Research in Electrical and Mechanical Engineering, Vol. 11, (Issue 1), pp 14-23 |
| 15 | Chibuzo N. Okoye, Paul C. Okolie, Onyemazuwa A. Azaka and Chidume N, Nwambu. (2023, September), "Tensile Behaviors of AL-Si-Mg Alloy Reinforced with Periwinkle Shell and Mangifera Indica Particulates", International Journal of Novel Research in Civil Structural and Earth Sciences, Vol. 10, (Issue 3), pp 15-24 |
| 16 | 59. Peter Okechukwu Chikelu, Solomon Chuka Nwigbo, Obotowo William Obot, Paul Chukwulozie Okolie and Jeremiah L. Chukwuneke. (2023, January), "Modelling and Simulation of Belt Bucket Elevator Head Shaft for Safe Life Operation", Scientific Reports, Vol. 13 |
| 17 | Sylvester Emeka Abonyi, Paul Chukwulozie Okolie, Anthony Amaechi Okafor, Chinagorom Emmanuel Nwadike. (2023, February), "Design of a Prototype Digital Water Level Controller Using Ultrasonic Sensor Interfaced with Microcontroller", Unizik Journal of Technology, Production and Mechanical Systems, Vol. 1, (Issue 1), pp 36-45 |
| 18 | CHUKWUNEDUM OGOCHUKWU CHINEDUM, OKOLIE PAUL CHUKWULOZIE, ONO CHUKWUMA GODFREY. (2023, August), "OPTIMIZATION AND PREDICTION OF THE PERCENTAGE ELONGATION OF MILD STEEL WELD METAL USING RSM AND ANN", JOURNAL OF INVENTIVE ENGINEERING AND TECHNOLOGY, Vol. 3, (Issue 3), pp 25-35 |
| 19 | Paul Chukwulozie Okolie, Jeremiah Lekwuwa Chukwuneke, Echezona Nnaemeka Obika, Chidume Nnamdi Nwambu. (2023, May), "Thermo-Mechanical Analysis and Microstructure of Steel Weld", Journal of Research in Mechanical Engineering, Vol. 9, (Issue 5), pp 22-25 |
| 20 | Okolie Paul Chukwulozie, Oluwadare Benjamin Segun, Lazarus Tari Lokoja, Okolie Uchenna Onyebuchi and Chikelue Edward Ochiagha. (2023, November), "Design and Performance Evaluation of a Pressure Gauge Calibration Apparatus", Journal of Inventive Engineering and Technology (JIET), Vol. 4, (Issue 2), pp 73-82 |
| 21 | Chibuzo N. Okoye, Paul C. Okolie, Benjamin S. Oluwadare, Chidume N. Nwambu. (2023, November), "THE DAMAGE TOLERANCE OF AL-SI-MG ALLOY REINFORCED WITH PERIWINKLE SHELL AND MANGIFERA INDICA PARTICULATES", Journal of Inventive Engineering and Technology (JIET), Vol. 4, (Issue 2), pp 64-72 |
| 22 | 56. J.L Chukwuneke, C.P Aniemene, P. C. Okolie, C.M Obele and E.C Chukwuma. (2022, May), "Analysis of the Dynamics of a Freely Falling Body in a Viscous Fluid: Computational Fluid Dynamics Approach", International Journal of Thermofluids, Vol. 14 |
| 23 | 57. Iheoma Chigoziri Nwuzor, Jeremiah Lekwuwa Chukwuneke, Chinomso Macanthony Ewulonu and Paul Chukwulozie Okolie. (2022, November), "Fabrication of Cardanol Thermosetting Resin Reinforced with Cellulose Nanofibril/Expanded Graphite Nano-Biocomposites", Industrial Crops & Products, Vol. 187, (Issue 1), pp 1-16 |
| 24 | Charles Chikwendu Okpala, Paul Chukwulozie Okolie and Jude Ezechi Dara. (2022, December), "Optimized Cost Effective Load-Bearing Tricycle: Design and Fabrication", Journal of Research in Mechanical Engineering, Vol. 8, (Issue 12), pp 9-21 |
| 25 | 56. Ihuoma Chigoziri Nwuzor, Paul Chukwulozie Okolie, Obumneme Emmanuel Ezeani and Simeon Chukwudozie Nwanonenyi. (2022, July), "Production of epoxidized cardanol–based vinyl ester resins with cinnamic acid for eco‑friendly coating materials", Emergent Materials |
| 26 | 54. Paul Chukwulozie Okolie, Echezona Nnaemeka Obika, Benjamin Segun Oluwadare, Onyemazuwa Andrew Azaka and Uchenna Onyebuchi Okolie. (2021, August), "Steel Work Design, Production and Analysis of Fish Feed Mixing Machine", Heliyon, Vol. 7, (Issue 8) |
| 27 | 55. Iheoma Chigoziri Nwuzor, Jeremiah Lekwuwa Chukwuneke, Chinomso Macanthony Ewulonu, Paul Chukwulozie Okolie. (2021, April), "Development and Characterization of Cardanol-Based Polymer Reinforced Fibre Bicomposites", International Journal of Trend in Scientific Research and Development (IJTSRD), Vol. 5, (Issue 3), pp 895-904 |
| 28 | Nwokeocha T.O, Achebe C.H, Okolie P.C. (2021, January), "Effects of Firing Temperature on the Refractory Properties of Mgbom Clay", Umudike Journal of Engineering and Technology, Michael Okpara University of Agriculture, Umudike, Vol. 6, (Issue 2), pp 76-81 |
| 29 | Solomon C.Nwigbo, Paul.C.Okolie, Jude. E. Dara, Clement. U. Atuanya. (2021, February), "Optimization of extrusion process parameter in manufacture of ilmenite TiO2 reinforced pencil lead", Heliyon |
| 30 | Sylvester Emeka Abonyi, Okolie Chukwulozie Paul,Emmanuel Chinagorom Nwadike. (2021, June), "Design and Construction of Fuelless AC Generator Using Alternator Interfaced With an Inverter", International Journal of Trend in Scientific Research and Development, Vol. 5, (Issue 4) |
| 31 | Tari Lokoja Lazarus, Paul Chukwulozie Okolie, Sylvester Emeka Abonyi, Ugwuegbu Duke Chiagoro. (2020, March), "Design and Fabrication of a Prototype Car Tyre Inflator", International Journal of Engineering Innovation & Research, Vol. 9, (Issue 1), pp 63-74 |
| 32 | Paul Chukwulozie Okolie, Emmanuel Okechukwu Chukwumuanya, Onyedikachukwu Hannah Ilo. (2020, January), "Techno-Economic Assessment of Municipal Solid Waste as Fuel for Electricity Generation in Awka City", International Journal of Engineering Innovation & Research, Vol. 9, (Issue 1), pp 75-86 |
| 33 | Okolie Chukwulozie Paul, Sylvester Emeka Abonyi, Oluwadare Benjamin Segun, Okolie Uchenna Onyebuchi. (2020, May), "Manufacturing Processes and Methods", International Journal of Engineering & Industry, Vol. 6, (Issue 1), pp 1-6 |
| 34 | Paul Chukwulozie Okolie, Christopher Igbinosa Eboigbe, Sylvester Emeka Abonyi, Ugwuegbu Duke Chiagoro. (2020, May), "Effect of Shielding Gas on the Tensile Properties of High Carbon Steel Weldment using Gas Tungsten Arc Welding in Combination of Argon and Carbon (IV) Oxide Gases", International Journal of Engineering Innovation & Research, Vol. 9, (Issue 3), pp 127-136 |
| 35 | Okolie C.P, Achebo J.L, Osarenmwinda J.O. (2020, June), "Effect of Shielding Gas on the Yield Strength of High Carbon Steel Weldment Using TIG in Combination of Argon and Carbon(iv)oxide gases", Zambrut, Vol. 3, (Issue 6), pp 1-9 |
| 36 | Paul Chukwulozie Okolie, Echezona Nnaemeka Obika, Benjamin Segun Oluwadare, Obiora Nnaemeka Ezenwa, Chinedu Stanley Udensi. (2020, September), "Steel work design and analysis of a 40-ton constant temperature hydraulic press", Heliyon |
| 37 | Jude Dara Ezechi, Christian Munachiso Odazie, Paul Chukwulozie Okolie, Andrew Azaka Onyemazuwa. (2020, September), "Design and construction of a double actuated mechanical speed breaker electricity generator", Heliyon |
| 38 | J.L Chukwuneke, M.C Ewulonu, I.C Chukwujike, P.C Okolie. (2019, June), "Physico-chemical Analysis of Pyrolyzed Bio-oil from Swietenia Macrophylla (mahogany) Wood", Heliyon, Vol. 5, (Issue 6), pp 1-7 |
| 39 | Paul Chukwulozie Okolie, Iheoma Chigoziri Chukwujike, Jeremiah Lekwuwa Chukwuneke, Jude Ezechi Dara. (2019, June), "Design and Production of a Fish Feed Pelletizing Machine", Heliyon, Vol. 5, (Issue 6), pp 1-7 |
| 40 | Okolie Paul Chukwulozie, Oluwadare Benjamin Segun, Chukwuneke Jeremiah Lekwuwa, Ugwuegbu Duke Chiagoro. (2018, January), "Design of Sewage Treatment Plant for CBN Housing Estate Trans-Ekulu Enugu Nigeria", Advances in Research in Sciencedomain, Vol. 13, (Issue 3), pp 1-18 |
| 41 | Okolie Paul Chukwulozie, Oluwadare Benjamin Segun, Okolie Uchenna Onyebuchi, Ugwuegbu Duke Chiagoro. (2018, February), "Engineering Risk and Decision Analysis", Archives of Current Research International in sciencedomain, Vol. 12, (Issue 2), pp 1-6 |
| 42 | Okolie Paul Chukwulozie, Oluwadare Benjamin Segun, Ezenwa Obiora Nnaemeka, Azaka Onyemazuwa Andrew. (2018, November), "Design and Production of Palm Nut and Fibre Separating Machine", Advances in Research in Sciencedomain, Vol. 17, (Issue 2), pp 1-8 |
| 43 | Tari L. Lazarus, Fatai O. Anafi, Okolie P. Chukwulozie, Okoli K. Obinna. (2018, November), "A Study on the Estimation of Rail Passenger Queuing Time during Ticketing Service at Abuja (IDU) Railway Station, Nigeria.", Advances in Research, Vol. 17, (Issue 2), pp 1-13 |
| 44 | Okolie P. Chukwulozie, Obika E. Nnaemeka, Nwuzor I. Chigoziri. (2018, October), "Ouality and Productivity Management", World Congress on Engineering and Computer Science, Vol. 2 |
| 45 | Okolie P.C, Nwadike E.C, Chukwuneke J.L, Nnodim C.T. (2017, January), "The Analysis of Cigarette Production Using Double Exponential Smoothing Model", Academic Journal of Science, Vol. 7, (Issue 2), pp 293-308 |
| 46 | Nwadike E.C, Azaka O.A, Okolie P.C, Chukwuneke J.L. (2017, February), "Surface Response Optimization GCMS/FTIR Analysis of Biodiesel Produced from Cow-Tallow and it's Blend with Conventional Diesel", Academic Journal of Science, Vol. 7, (Issue 2), pp 345-356 |
| 47 | Ama Anya Agwu, Nwigbo Solomon Chuka, Okolie Paul Chukwulozie, Aguh Patrick Sunday. (2017, September), "Effects of Noise and Vibration on Subjects Exposed to Electrical Power Generating Set Pollution", Advances in Research in Sciencedomain, Vol. 11, (Issue 4), pp 1-11 |
| 48 | J. L. Chukwuneke, P. C. Chukwuneke, P. C. Okolie, J. E. Sinebe. (2016, January), "Hamaker Coefficient Concept: The Application to the Mycobacterium Tuberculosis "“ Macrophage Interactions Mechanism", Advances in Bioscience and Bioengineering, Vol. 4, (Issue 1), pp 1-20 |
| 49 | J.L. Chukwuneke, P.C. Okolie, D.C. Ugwuegbu, J.E. Sinebe. (2016, January), "Design Analysis and Fabrication of a Tensile Creep Testing Machine", Current Journal of Applied Science & Technology, Vol. 14, (Issue 3), pp 1-13 |
| 50 | Okolie Paul Chukwulozie, Oluwadare Benjamin Segun, Ezeanyim Okechukwu Chiedu, Nwadike Emmanuel Chinagorom. (2016, April), "Appraisal of Queuing Behaviors in Intafact Beverage Transportation System", American Journal of Engineering Research, Vol. 5, (Issue 4), pp 197-203 |
| 51 | Okolie Paul Chukwulozie, Oluwadare Benjamin Segun, Chukwuneke Jeremaih Lekwuwa, Nwadike Emmanuel Chinagorom. (2016, June), "Response Surface Optimization of Production Mix of selected Raw Materials for Plastic Production", Current Journal of Applied Science & Technology, Vol. 16, (Issue 5), pp 1-13 |
| 52 | Okolie Paul Chukwulozie, Obika Echezona Nnaemeka, Nwadike Emmanuel Chinagorom, Ugwuegbu Duke Chiagoro, Gaven Dipnap Vennim. (2016, July), "Productivity Evaluation in a Manufacturing Industry Using a Forcasting Model", American Journal of Engineering Research, Vol. 5, (Issue 7), pp 300-311 |
| 53 | Ejiogu Ndubuisi Okorowu, Nwigbo Solomon Chuka, Okolie Paul Chukwulozie. (2016, August), "Preliminary Design of Monorail Network for Anambra State, Nigeria", Current Journal of Applied Science & Technology, Vol. 17, (Issue 2), pp 1-8 |
| 54 | Okolie Paul Chukwulozie, Oluwadare Benjamin Segun, Obika Echezona Nnaemeka, Nwadike Emmanuel Chinagorom, Olagunju Suraj Jare. (2016, September), "Optimal Productivity And Design Of Production Quantity Of A Manufacturing Industry", International Journal of Scientific & Technology Research, Vol. 5, (Issue 9), pp 19-27 |
| 55 | Okolie Paul Chukwulozie, Azaka Onyemazuwa Andrew, Okoli Ndubuisi Celestine, Sinebe Jude Ebieladoh. (2015, October), "Analysis and Forecasting of the Production Quantity in a Manufacturing Industry Using Historical Data", The International Journal of Engineering and Sciences, Vol. 4, (Issue 10), pp 7-17 |
| 56 | Okolie Paul Chukwulozie, Chukwuneke Jeremiah Lekwuwa, Okoli Ndubuisi Celestine, Azaka Onyemazuwa Andrew, Sinebe Jude Ebieladoh. (2015, November), "Optimization of the Production Mixture of Selected Raw Material for Plastic Production: A Case Study of Louis Carter Plastic Manufacturing Industry", American Journal of Engineering Research, Vol. 4, (Issue 11), pp 13-25 |
| 57 | F.Onoroh, S.O. Enibe, P.C. Okolie. (2015, December), "Optimization Techniques for Thermal Management in an IRF 3205 Mosfet Switches", Journal of Emerging Trends in Engineering and Applied Sciences, Vol. 6, (Issue 6), pp 399-404 |
| 58 | Okolie P.C, Obika E.N, Azaka O.A, Sinebe J.E. (2015, December), "Steel Work Design and Analysis of a Mobile Floor Crane", British Journal of Applied Science & Technology, Vol. 13, (Issue 5), pp 1-9 |
| 59 | Okafor A. A., Achebe C. H., Chukwuneke J. L., Okolie P. C.. (2014, November), "Experimental Simulation and Optimization of Performance of Four Stroke Spark Ignition Injector Engine", International Journal of Scientific & Engineering Research, Vol. 5, (Issue 11), pp 167-173 |
| 60 | Okolie Chukwulozie Paul, Iwenofu Chinwe Onyedika,Sinebe Jude Ebieladoh and Enyi Chukwudi Louis. (2014, December), "Modeling and Statistical Analysis of a Soap Production Mix in Bejoy Manufacturing Industry, Anambra State, Nigeria", International Journal of Scientific & Engineering Research, Vol. 5, (Issue 12), pp 454-470 |
| 61 | Okolie Paul Chukwulozie, Okouzi Solomon Abhulimhen, Chukwuneke Jeremiah Lekwuwa, and Sinebe Jude Ebieladoh. (2014, January), "Design and Development of Materials Requirements Planning Simulation Model Using Visual Basic Programming Language", International Journal of Multidisciplinary Sciences and Engineering, Vol. 5, (Issue 1), pp 11-24 |
| 62 | Okolie Paul Chukwulozie, Ezeliora Chukwuemeka Daniel, Chukwuneke Jeremiah Lekwuwa and Achebe Chinonso Hubert. (2014, February), "Statistical Analysis of Processing Data for Premier Bread Industry Using Chi-Squared and Goodness-of-Fit Test", International Journal of Multidisciplinary Sciences and Engineering, Vol. 5, (Issue 2), pp 1-11 |
| 63 | Anisiji O. E., Chukwuneke J. L., Achebe C. H., Okolie P. C.. (2014, July), "Integrated Process Modelling of A Thermophilic Biogas Plant", International Journal of Scientific & Technology Research, Vol. 3, (Issue 7), pp 334-341 |
| 64 | Chukwuneke J. L., Achebe C. H., Okolie P. C., Okwudibe H. A.. (2014, July), "Experimental Investigation on Effect of Head and Bucket Splitter Angle on the Power Output of A Pelton Turbine", Journal of Information Engineering and Applications, Vol. 4, (Issue 10), pp 48-54 |
| 65 | Okolie Chukwulozie Paul, Ezeliora Chukwuemeka Daniel, Iwenofu Chinwe Onyedika, Sinebe Jude Ebieladoh. (2014, September), "Optimization Of A Soap Production Mix Using Response Surface Modeling: A Case Of Niger Bar Soap Manufacturing Industry Onitsha, Anambra State, Nigeria", International Journal of Scientific & Technology Research, Vol. 3, (Issue 9), pp 346-352 |
| 66 | Chukwuneke J.L, Achebe C.H, Okolie P.C, Okafor E.A. (2013, January), "The Effect of Variety and Drying on the Engineering Properties of Fermented Ground Cassava", International Journal of Scientific Knowledge (Computing and Information Technology), Vol. 5, (Issue 1), pp 13-27 |
| 67 | Chukwuneke J.L, Achebe C.H, Okolie P.C, Anisiji E.O. (2013, April), "Modelling of Electromechanical Control of Camless Internal Combustion Engine Valve Actuator", International Journal of Engineering and Mathematical Sciences, Vol. 3, (Issue 1), pp 18-38 |
| 68 | Onyenobi C.S, Chukwuneke J.L, Achebe C.H, Okolie P.C. (2013, April), "Biogas Production From Municipal Sewage Sludge Using Ultrasound Speeding Digestion Process", International Journal of Science and Engineering Investigations, Vol. 2, (Issue 15), pp 109-118 |
| 69 | Chukwuneke.J.L, Achebe C.H., Okolie P.C, Okonkwo U.C. (2013, August), "Statistical Thermodynamics Approach to Urinary Analysis Employing Micro-Canonical Ensemble", International Journal of Multidisciplinary Sciences and Engineering, Vol. 4, (Issue 7), pp 60-64 |
| 70 | Okolie Paul Chukwulozie, Dara Jude Ezechi, Sinebe Jude Ebieladoh and Iwenofu Chinwe Onyedika. (2013, December), "Optimization of Processing Data Time for Stephens Bread Industries Owerri, Imo State, Nigeria", International Journal of Multidisciplinary Sciences and Engineering, Vol. 4, (Issue 11), pp 26-39 |
| 71 | Chukwuneke J.L., Achebe C.H., Okolie P.C., Ajike C.O.. (2012, May), "Analysis of a Laboratory Bicycle Ergometer System Using Grand Canonical Ensemble", International Journal of Multidisciplinary Sciences and Engineering, Vol. 3, (Issue 5), pp 58-65 |
| 72 | Chinwuko C.E., Chukwuneke J.L., Okolie P.C., Dara E.J. (2012, June), "Modeling and Optimization of Electricity Distribution Planning System Using Dynamic Programming Techniques: A Case of Power Holding Company of Nigeria (PHCN)", International Journal of Multidisciplinary Sciences and Engineering, Vol. 3, (Issue 6), pp 39-46 |
| 73 | Anisiji E.O., Achebe C.H., Chukwuneke J.L.,Okolie P.C. (2012, June), "A Mathematical Model of a Commercial Thermophilic Biogas Plant", International Journal of Mechanical Engineering (Recent Science publication research), Vol. 40, (Issue 10) |
| 74 | MBA E.F., Chukwuneke J.L, Achebe C.H, Okolie P.C.. (2012, June), "Modeling and Simulation of a Photovoltaic Powered Vapour Compression Refrigeration System", Journal of Information Engineering and Applications, Vol. 2, (Issue 10), pp 1-15 |
| 75 | Chukwuneke J.L, Ajike C.O, Achebe C.H, Okolie P.C.. (2012, November), "A Mathematical Model of an Evaporative Cooling Pad Using Sintered Nigerian Clay", Journal of Minerals and Materials Characterization and Engineering |
| 76 | Ozoegwu C.G, Uzoh C.F, Chukwuneke J.L, Okolie P.C. (2012, July), "Chatter Stability Characterization of a Three-Flute Miller using the Method of Full Discretization", International Journal of Mechanics and Applications, Vol. 2, (Issue 6) |
| 77 | Azaka O.A, Nwigbo S.C, Atuanya C.U, Okolie P.C, Nwadike C.E. (2012, August), "Estimating Wildfire Behaviour in Southern Nigerian Mangrove Vegetations", International Journal of Engineering and Mathematical Science, Vol. 2, (Issue 1) |
| 78 | Okolie P.C., Okafor E.C., Chinwuko E.C., Ubani N.O., and Okenwa U. (2012, April), "Design for Temperature Controlled Solar Chick Brooder", International Journal of Scientific & Engineering Research (IJSER), Vol. 3, (Issue 4), pp 1-7 |
| 79 | Chukwuneke Jeremiah Lekwuwa, Achebe Chinonso Hubert, Okolie Paul Chukwulozie, Ajike Chinagorom Ogbu. (2012, May), "An Application of Statistical Thermodynamics to an Open Flow System", International Journal of Scientific & Engineering Research,, Vol. 3, (Issue 5), pp 1-6 |
| 80 | Okolie P.C., Okafor E.C., and Chinwuko E.C. (2010, May), "Optimal Production Mix for Bread Industries: A case study of selected Bakery Industries in Eastern Nigeria", Journal of Engineering & Applied Sciences(JEAS), Vol. 5, (Issue 6), pp 403-412 |
Academic Leadership Qualities
| Supervisions | |
|---|---|
| 1 | "Determination of Optimum Particle Size for the production of some selected agricultural briquette" (2021). Completed Masters project by Okudibe Henry .S |
| 2 | "Characterization of Selected indigenous clays for Refractory Materials" (2021). Completed Masters project by Nwokeocha Tochukwu Obiallo (2010246055p) |
| 3 | "Techno-Economic Assessment of Electricity Generation from Awka Municipal Solid Waste" (2021). Completed Masters project by Ilo OnyedikaChukwu Hannah(2013246008f) |
| 4 | "EVALUATION OF MECHANICAL AND THERMAL BEHAVIOR OF HYBRID MANGIFERA INDICA/IRVINGIA WOMBOLU SHELLS PARTICULATES REINFORCED EPOXY BIOCOMPOSITE" (2024). Completed Masters project by NNAMDI MARTIN ALOZIE 2020246007FB |
| 5 | "DESIGN AND DEVELOPMENT OF A BIO-MASS DUAL THERMAL SYSTEM FOR FOOD PROCESSING PLANTS" (2023). Completed Masters project by NWANKWO CHARLES IFEANYI 2018246001F |
| 6 | "EVALUATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF PERIWINKLE AND MANGIFERA INDICA SHELLS HYBRID REINFORCED Al-Si-Mg ALLOY MATERIAL BIOCOMPOSITE" (2023). Completed Masters project by NDUBUISI OKOYE CHIBUZO 2020246003F |
| 7 | "DEVELOPMENT OF ENGINEERING MATERIAL SELECTION COMPUTER PACKAGE FOR ENHANCED DECISION MAKING" (2024). Completed Masters project by NWANKWO DANIEL 2020246004FB |
| 8 | "EFFECTS OF BAMBOO FIBRE AND MANGIFERA INDICA PARTICULATES ON THE STRUCTURE AND MECHANICAL PROPERTIES OF EPOXY RESIN BIOCOMPOSITES" (2024). Completed Masters project by AGOMUO CHINWENDU CHINASAOKWU 2020246010FB |
| Grants | |
| 1 | Awardee: "The Design and Fabrication of a Bitter Leaf Washing Machine" (December, 2023 to June, 2024). Completed sponsored grant by Tertiary Education Trust Fund |
| 2 | Awardee: "Institutional Based Research (IBR)" (August, 2022 to July, 2023). Completed sponsored grant by Tertiary Education Trust Fund |
| 3 | Collaborator: "Institutional Based Research (IBR)" (January, 2022 to August, 2022). Completed sponsored grant by Tertiary Education Trust Fund |
| 4 | Collaborator: "Institutional Based Research (IBR)" (January, 2022 to November, 2023). Completed sponsored grant by Tertiary Education Trust Fund |
| 5 | Awardee: "INSTITUTIONAL BASED RESEARCH (IBR) GRANT" (June, 2017 to April, 2019). Completed sponsored grant by TETFUND |
| Editorships | |
| 1 | Editor, "JOURNAL OF TECHNOLOGY, PRODUCTION AND MECHANICAL SYSTEMS" (November, 2022) |
| 2 | Editor, "International Journal of Engineering Innovation and Research" (January, 2017) |
| Reviewerships | |
| 1 | Reviewer, "Experimental setup in study for HCCI engine vibration using I-kazTM Method and using palm oil biodiesel blended with RON 97 as fuel" (February, 2018) |
| 2 | Reviewer, "The Simulation and Analysis on Correct Operation of Tire Blowout" (March, 2018) |
| Contributions to the University/Society | |
| 1 | Director, "CHISCO INSTITUTE OF LOGISTICS AND SUPPLY CHAIN MANAGEMENT" (February, 2024) |
| 2 | Director, "Chisco Institute for Transportation Studies" (May, 2023) |
| 3 | Coordinator, "CHISCO Institute for Transportation Studies" (July, 2021) |
| 4 | MEMBER, "UNIZIK TRAFFIC VOLUNTEER CORPS COMMITTEE" (September, 2021) |
| 5 | Member, "SIWES committee" (January, 2020) |
| 6 | MEMBER, "PAINT COTTAGE INDUSTRY COMMITTEE" (December, 2019) |
| 7 | Deputy Coordinator (3rd appointment), "CHISCO Institute for Transportation Studies" (January, 2019) |
| 8 | Chairman, "Committee for Faculty of Engineering Welfare" (May, 2019) |
| 9 | Postgraduate Coordinator, "Department of Mechanical Engineering" (October, 2019) |
| 10 | Deputy Coordinator (2nd appointment), "CHISCO Institute for Transportation Studies" (July, 2016) |
| 11 | Deputy Coordinator (First appointment), "CHISCO Institute for Transportation Studies" (October, 2014) |
Membership of Professional/Relevant Bodies
| 1 | Associate Member, "AFRICAN ACADEMICS NETWORK" - AAN/AFAAN/01/00001 (member since 2023), https://africanacademicsnetwork.com |
| 2 | Fellow Member, "Institute Of Oil & Gas research & Hydrocarbon Studies" - 101060 (member since 2020), https://instituteofoilandgasresearch.org.ng/ |
| 3 | Fellow Member, "Institute of Policy Management Development Fellowship" - No. 1312 (member since 2019), http://www.ipmd.org.ng |
| 4 | Full Member, "International Association of Engineers(IAENG)" - 113840 (member since 2011), http://www.iaeng.org/membership.html |
| 5 | Full Member, "The Council for the Regulation of Engineering in Nigeria(COREN)" - R.18,230 (member since 2010), https://coren.gov.ng/ |
| 6 | Full Member, "The Nigerian Society Of Engineers" - 21394 (member since 2009), https://www.nse.org.ng/ |
| 7 | Graduate Member, "Nigerian Institute of Management" - 052445 (member since 2009), https://nim.ng/ |
Relevant Events Attended
| Conferences | |
|---|---|
| 1 | "Theme: Sustainable Engineering Solution to Food Security and Climate Change/ International Engineering Conference", (NIGERIAN SOCIETY OF ENGINEERS (NSE)), 18th November, 2024 to 22nd November, 2024; PHYSICAL |
| 2 | "COUNCIL FOR THE REGULATION OF ENGINEERING IN NIGERIA (COREN) ASSEMBLY", (COREN), 2nd September, 2024 to 4th September, 2024; Thisday Dome, Abuja |
| 3 | "RE-Engineering the Manufacturing Sector for Competitiveness and Enhanced Economic Growth", (NIGERIAN SOCIETY OF ENGINEERS (NSE)), 27th November, 2023 to 1st December, 2023; The Nigerian Society of Engineers National Engineering Conference and Annual General Meeting Held at International Conference Centre Abuja, Nigeria from 27th November to 1st December, 2023. |
| 4 | "Entrenching and Strengthening Engineering Practitioners’ Code of Conduct for Resilient Engineering Practice in Nigeria", (COREN), 7th August, 2023 to 9th August, 2023; 31st Engineering Assembly of The Council for The Regulation of Engineering in Nigeria (COREN) Held at International Conference Centre Abuja, Nigeria from 7th to 9th August, 2023. |
| 5 | "Domestication and Development of Codes, Standards and Regulations as a Panacea for Engineering Infrastructural Failures in Nigeria ", (COREN), 8th August, 2022 to 10th August, 2022; INTERNATIONAL CONFERENCE CENTRE (ICC), ABUJA |
| 6 | "EXPANSION OF THE ENERGY MIX FOR NATIONAL ECONOMIC GROWTH", (NIGERIAN SOCIETY OF ENGINEERS), 6th December, 2021 to 10th December, 2021; INTERNATIONAL CONFERENCE CENTRE (ICC), ABUJA |
| 7 | "Advancing the Frontiers of Engineering Practitioners and Entrenching Professionalism for National Development", (COREN), 9th August, 2021 to 11th August, 2021; INTERNATIONAL CONFERENCE CENTRE (ICC), ABUJA |
| 8 | "Strategic Alliance Amongst Engineering Professionals for Enhanced Opportunities", (COREN), 19th August, 2019 to 21st August, 2019; International Conference Centre, Abuja |
| 9 | "Sustainable Engineering Infrastructure for Accelerated Rural Development", (Nigerian Society of Engineers), 26th November, 2018 to 30th November, 2018; Chida Events Centre Utako, Abuja, Nigeria |
| 10 | "Quality and Productivity Management", (International Association of Engineers (IAENG), Proceedings of The World Congress on Engineering and Computer Science 2018, 23-25 October, 2018, San Francisco, USA, pp758-761), 23rd October, 2018 to 25th October, 2018; Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering and Computer Science 2018, 23-25 October, 2018, San Francisco, USA, pp758-761 |
| 11 | ""Quality and Productivity Management," Lecture Notes in Engineering and Computer Science: Proceedings of the World Congress on Engineering and Computer Science, WCECS 2018.", (International Association of Engineers (IAENG)), 23rd October, 2018 to 25th October, 2018; San Francisco USA |
| 12 | "The Nigerian Built Industry: Building a Sustainable Structure with Allied Professionals", (COREN), 6th August, 2018 to 8th August, 2018; International Conference Centre, Abuja |
| 13 | "Diversification of Nigerian Economy: Engineering Perspective", (Nigerian Society of Engineers), 20th November, 2017 to 24th November, 2017; Chida Events Centre Utako, Abuja, Nigeria |
| 14 | "Entrepreneurship and Manufacturing in Nigeria: Challenges and Opportunities for a Better Future", (COREN), 7th August, 2017 to 9th August, 2017; International Conference Centre, Abuja |
| 15 | "The Analysis of Cigarette Production Using Double Exponential Smoothing Model", (INTERNATIONAL JOURNAL OF ARTS AND SCIENCES), 8th November, 2016 to 11th November, 2016; UNIVERSITY OF LONDON, UK |
| 16 | "Surface Response Optimization GCMS/FTIR Analysis of Biodiesel Produced From Cow-Tallow and Its Blend with Conventional Diesel", (INTERNATIONAL JOURNAL OF ARTS AND SCIENCES), 8th November, 2016 to 11th November, 2016; UNIVERSITY OF LONDON, UK |
| 17 | "Embracing the Future: Improving the Quality of Engineering Education and Practice in Nigeria", (COREN), 8th August, 2016 to 8th October, 2016; International Conference Centre, Abuja |
| 18 | "Overcoming Nigeria Monolithic Economy: The Role of Engineering Profession", (COREN), 10th August, 2015 to 12th August, 2015; International Conference Centre, Abuja |
| Workshops | |
| 1 | "NAVIGATING THE FUTURE OF WORK: UPSKILLING AND RESKILLING FOR ENGINEERS. SUB-THEME: INTEGRATING QUALITY MANAGEMENT SYSTEM (QMS) INTO ENGINEERING PROJECTS", (NIGERIAN SOCIETY OF ENGINEERS (NSE)), 11th February, 2025 to 13th February, 2025; ZOOM |
| 2 | "NAVIGATING THE FUTURE OF WORK: UPSKILLING AND RESKILLING FOR ENGINEERS. SUB-THEME: CONSTRUCTION 4.0: LEVERAGING AI FOR ADVANCED BUILDING SERVICES AND SMART INFRASTRUCTURE", (NIGERIAN SOCIETY OF ENGINEERS (NSE)), 11th February, 2025 to 13th February, 2025; ZOOM |
| 3 | "NAVIGATING THE FUTURE OF WORK: UPSKILLING AND RESKILLING FOR ENGINEERS. SUB-THEME: SUSTAINABLE ETHICS AND STANDARDS IN ENGINEERING", (NIGERIAN SOCIETY OF ENGINEERS (NSE)), 11th February, 2025 to 13th February, 2025; ZOOM |
| 4 | "NATIONAL SKILL QUALIFICATION (NSQ) LEVEL 3 IN QUALITY ASSURANCE OF ASSESSMENT", (NBTE CONSULTS LTD), 24th September, 2024 to 24th January, 2025; NNAMDI AZIKIWE UNIVERSITY AWKA |
| 5 | "Facilities Infrastructure, Maintenance and Management (FIMM)", (KENVISION TECHNIKS), 18th July, 2022 to 22nd July, 2022; KENVISION TECHNIKS WORKSHOPS, NAIROBI KENYA. |
| 6 | "Deepening Research Competence for Effective Scholarship", (School of Postgraduate Nnamdi Azikiwe University Awka), 9th October, 2018 to 12th October, 2018; Nnamdi Azikiwe University PTDF Auditorium |
| 7 | "Research Workshop For Sciences", (School of Postgraduate Nnamdi Azikiwe University Awka), 22nd January, 2018 to 26th January, 2018; Postgraduate Conference Hall Nnamdi Azikiwe University Awka |
| 8 | "Unraveling the World of Academic Publishing for Junior and Mid-Level Academics (Workshop on Academic Writing and Publishing)", (National Universities Commission in Collaboration with Enago Academy), 15th December, 2017 to 15th December, 2017; Nnamdi Azikiwe University Awka, Nigeria |
| Seminar | |
| 1 | "Youth Leadership Orientation Seminar of Catholic Youth Organization of Nigeria (CYON)", (Catholic Youth Organization of Nigeria (CYON)Awka), 22nd July, 2010 to 25th July, 2010; St John Vocational Institute,Neni Anaocha Local Government Area Anambra State |