Prof. Chukwutoo Christopher Ihueze
Prof. Chukwutoo Christopher Ihueze is a PROFESSOR in INDUSTRIAL AND PRODUCTION ENGINEERING Department, Faculty Of Engineering in Nnamdi Azikiwe University
|  |
Staff Profile
I am from Umuohi Ihembosi in Ekwusigo LGA and a Lecturer in the Department of Industrial and Production Engineering of Nnamdi Azikiwe University Awka. I am a Professor of Design and Production Technology. I have many journal publications to my credit. My research activities earned me the PTDF oIL and gas research grant in 2014. The research grant is on the production of oil and gas facilities using plantain fibre reinforced HDPE.
Personal Information
Email: | |
Phone: | |
Address: | Industrial And Production Engineering, Faculty Of Engineering, Nnamdi Azikiwe University, Awka. |
Faculty/Unit: | FACULTY OF ENGINEERING |
Department/Sub-Unit: | INDUSTRIAL AND PRODUCTION ENGINEERING |
Social Profiles
Interest Areas
Academic Qualifications
| Degrees / Basic Certificates | |
|---|---|
| 1 | Nnamdi Azikiwe University. (Master Degree, August, 2001) October, 1997 to December, 1999 M.Eng Mechanical/Production Engineering |
| 2 | Okija Community Seconday School, Okija. (GCE, June, 1981) November, 1976 to June, 1981 GCE Secondary Education |
| 3 | Central School Ihembosi. (FSLC, September, 1975) September, 1970 to September, 1975 FSLC Primary Education |
| 4 | University Of Nigeria, Nsukka. (Doctor of Philosophy, ) October, 2021 to September, 2005 Ph.D Mechanical Engineering |
| 5 | University Of Nigeria, Nsukka. (Bachelor Degree, ) October, 1982 to June, 1987 B.Eng Agricultural Engineering |
Relevant/Working Experience
| 1 | Researcher, Petroleum Technology Development Fund(PTDF) September, 2021 to Present |
| 2 | Professor, Nnamdi Azikiwe University, Awka May, 2007 to Present |
| 3 | Head of Department of Mechanical Engineering, Anambra State University Uli May, 2003 to May, 2007 |
| 4 | Leader, Egwusigo LGA September, 1999 to September, 2021 |
Creative Output
| Book Chapters | |
|---|---|
| 1 | 5 Christian Emeka Okafor and Christopher Chukwutoo Ihueze. (2020, July) Strength Analysis And Variation Of Elastic Properties In Plantain Fiber/polyester Composites For Structural Applicaions-From Knowledge To Industrial Applications Composite and nanocomposite materials, edited by Tri-Dung Ngo of University of Alberta, Published by INTECHOPEN LIMITED |
| Journal Articles | |
| 1 | 3 IhuezeC. C, Okafor, C. E.,, Obuka S. N., AbdulrahmanJ.and Onwurah U. O.. (2021, March), "Integrity And Cost Evaluation Of Natural Fibers/HDPE Composite Tailored For Piping Applications", Journal of Thermoplastic Composite Materials. Sage. XX(X), pp 1-27 |
| 2 | 2 Okafor, C. E., Onovo, A. C., Imoisili, P. E, Kulkarni K. M., and Ihueze C. C. (2021, June), "Optimal Route To Robust Hybridization Of Banana-coir Fiber Particulate In Polymer Matrix For Automotive Applications", Materialia Elsevier. DOI: 10.1016/j.mtla.2021.101098 |
| 3 | 1 Okafor, C. E., and Ihueze C. C.. (2021, March), "The Graft Of ANN-FEM Technique In Macro-mechanics Of Multi-oriented Natural Fiber/polyester Laminates", Mechanics of Advanced Composite Structures |
| 4 | 6 Okonkwo U. C, Okafor, C. E., and Ihueze C. C.. (2020, March), "Development And Performance Evaluation Of A Double Barrel Cassava Grating Machine.", Sumerianz Journal of Scientific Research, Vol. 3, (Issue 12), pp 133-140 |
| 5 | 4 Christian Emeka Okafor, Anthony Chinweuba & Christopher Chukwutoo Ihueze. (2020, July), "Predictive Energy Requirement Models In Bio-fibre Communication Process", SN Applied Sci. 2,2047(2020), DOI https://doi.org/10.1007/s42452-020-0371-0 |
| 6 | 9 Ihueze, C.C., Okpala, C.C., Okoli, N. C., and Onwurah,U.O. (2019, February), "Dividends Of Professional Registration In Engineering Practice For Technological Advancement", International journal of advanced enginerring and technology, Vol. 3, (Issue 1) |
| 7 | 8 Okpala, C.C., Ihueze, C.C and Onah B.I.. (2019, March), "The Need For Quality Assurance Scheme In The Nigerian Manufacturing Sector", International journal of advanced engineering and technology vo3(1)International journal of advanced engineering and technology, Vol. 3, (Issue 1) |
| 8 | 7 Okpala, C.C., Ihueze, C.C., Obuka, N.S., Obiuto, C.C and Onwurah,U.O. (2019, March), "Technological Innovations: A Panacea For Sustainable Economic Growth", International journal of engineering science and computing, Vol. 9, (Issue 5) |
| 9 | 18 Chuwutoo C. Ihueze and Uchendu O.Onwurah. (2018, March), "Road Traffic Accidents Prediction Modelling: An Analysis Of Anambra State, Nigeria", Accident Analysis and Prevention,Elsevier, Vol. 112, pp 21-29 |
| 10 | 16 CC Ihueze and PS Ebisike. (2018, January), "Optimization Of Production System: An Application Of Total Productive Maintenance (TPM)", Archives of Current Research International, Vol. 13, (Issue 1), pp 1-9 |
| 11 | 15 CC Ihueze and PS Ebisike. (2018, July), "Dynamic Analysis Of Instability In Three- Wheeler Automobile Vehicle", Archives of Current Research International, Vol. 13, (Issue 3), pp 1-10 |
| 12 | 14 Christopher Chukwutoo Ihueze and Chukwuebuka Martinoe U-Dominic. (2018, July), "Maximizing Overall Equipment Effectiveness In A Food Processing Industry: A Case Study", Archieves of current research international, Vol. 11, (Issue 4), pp 1-10 |
| 13 | 13 Ihueze, C. C. and Igbokwe, N. C.. (2018, February), "Total Productive Maintenance(TPM) As A Business Strategy In Manufacturing Small And Medium Enterprises", Advances in research, Vol. 29, (Issue 6), pp 45-58 |
| 14 | 12 Benjamin U. Oreko, Omonigho B. Otanocha, Eyere Emagbere and Christopher Chukwutoo Ihueze. (2018, May), "Analysis And Application Of Natural Fibre Reinforced Polyester Composites To Automobile Fender", Convenant Journal of Engineering Technology(CJET), Vol. 1, (Issue 1), pp 1-12 |
| 15 | 11 Constance Obiuto Nwankwo and Christopher C. Ihueze. (2018, January), "Corrosion Rate Models For Oil And Gas Pipeline Sytsems", International Journal of Engineering and Research Technology (IJERT), Vol. 7 |
| 16 | 10 Charles.C.Okpala and Christopher.C. Ihueze. (2018, February), "Taguchi Robust Design For Optimal Setting Of Process Wastes Parameters In An Automotive Parts Manufacturing Company", World academy of science and technology, International journal of Industrial and manufacturing engineering, Vol. 13, (Issue 2), pp 101-106 |
| 17 | 24 C.C. Ihueze, A. E Oluleye, C. E. Okafor, C. M. Obele, J. Abdulrahman , S. Obukaand R. Ajemba. (2017, February), "Development Of Plantain Fibres For Application In Design Of Oil And Gas Product Systems", PTDJ 2017 Vol. 7 No 1, www.ptdjournal.com, Vol. 7, (Issue 1) |
| 18 | 23 C.C. Ihueze and I.F. Ogbodo. (2017, March), "Criticality Analysis And Quality Appraisal Of Innoson Injection Mold System.", International Research Journal of Engineering and Technology, Vol. 4, (Issue 3), pp 276-295 |
| 19 | 22 Chukwumuanya Emmanuel Okechukwuand Ihueze Christopher Chukwutoo. (2017, August), "Application Of Markov Chain In Municipal Solid Waste Management.", Journal of Engineering and Applied Sciences (JEAS) |
| 20 | 21 Chukwumuanya Emmanuel Okechukwuand Ihueze Christopher Chukwutoo. (2017, January), "Mathematical Modeling Of Solid Waste Management Processes", Journal of Research in Environmental and Earth Sciences (JREES)., Vol. 3, (Issue 5) |
| 21 | 20 Christopher Chukwutoo Ihueze, Obiora Jeremiah Obiafudo and Christian EmekaOkafor. (2017, July), "Biofibers In Polymer Matrixes: An Application For Auto Body Fender", International Journal of Plastics Technology, Springer, Vol. 21, (Issue 1), pp 171-193 |
| 22 | 19 C.C. Ihueze, A.E. Oluleye, C.E. Okafor, C.M. Obele, J. Abdulrahman, S. Obuka, and R. Ajemba. (2017, March), "Plantain Fibre Particle Reinforced HDPE(PFPRHDPE) For Gas Line Piping Design", International Journal of Plastics Technology, Springer, Vol. 21, (Issue 2), pp 1-27 |
| 23 | 17 C. C. Ihueze and C.C.Okpala. (2017, March), "Ergonomic Improvements In A Paint Manufacturing Company", International Research Journal of Engineering and Technology(IRET), Vol. 4, (Issue 10), pp 198-1993 |
| 24 | 30 Ihueze C. C. and Chukwumuanya E. O. (2016, April), "Statistical Modeling Of Anambra State Solid Waste Management Constraints.", Global Journal of Engineering, Design & Technology, Vol. 4, (Issue 6), pp 1-7 |
| 25 | 28 C. C. Ihueze and C.C.Okpala, E.C. Okafor and U.C.Okonkwo. (2016, February), "Harnessing Science, Technology And Innovations (STI) For Sustainable Industrial And Economic Development", International Journal of Engineering and Management Research, Vol. 5, (Issue 5) |
| 26 | 27 Ihueze C. C. and Obuka, S.P. N. (2016, April), "Engineered Composites Materials And Natural Fibres: Design And Manufacture", IOSR Journal of Mechanical and Civil Engineering |
| 27 | 26 C. C. Ihueze, O. J. Obiafudo and C. E. Okafor. (2016, July), "Characterization Of Plantain Fibre Reinforced High Density Polyethylene Composite As An Alternative Material For Auto Body Fenders", Journal of Innovative Research in Engineering and Sciences, Vol. 4, (Issue 5), pp 574-587 |
| 28 | 25 ChinedumOgonnaMgbemena, Christopher Chukwutoo Ihueze, and Aryiapallil Ramankuttymenon Ravindranatha Menon. (2016, July), "Performance Characteristics And Analysis Of Tailored Natural Rubber/Organo-Kaolin Composites", International Journal of Plastic Technology, DOI 10.11007/s12588-016-9142-7, Springer, pp 1-17 |
| 29 | 38 Christopher Chukwutoo Ihueze and Ebisike Paschal Soribe. (2016, April), "Validation Of Process Performance Through Reliability Measurement", British jjournal of applied science and technology, Vol. 15, (Issue 6), pp 1-3 |
| 30 | 37 Christopher Chukwutoo Ihueze and Maduabuchi Kingsley Achike and C.E. Okafor. (2016, February), "Optimal Performance Characteristics And Reinforcement Combinations Of Coconut Fibre Reinforced High Density Polyethylene (HDPE) Polymer Matrixes", Journal of Scientific Research and Reports, 9(3), 1-10, Vol. 9, (Issue 3), pp 1-10 |
| 31 | 35 C.C. Ihueze and M. K. Achike and C.E. Okafor. (2016, February), "Modelling And Optimization Of Performance Characteristics Of Coconut Fibre Particles Reinforced HDPE", Journal of Basic and Applied Research International, Vol. 17, (Issue 1), pp 32-48 |
| 32 | 34 C.C. Ihueze and P.S.Aguh. (2016, March), "Modeling And Optimization Performance Characteristics Of Wood Ash Particles Reinforced PP Resin(WARPP)", Journal of Basic and Applied Research International(JOBARI), 14(2): 1-21, Vol. 14, (Issue 3), pp 1-21 |
| 33 | 32 C. C. Ihueze and Ekwueme, O. G. (2016, March), "Modelling And Forecasting The Maintenance Cost Of Roads In Anambra State", International Journal of Scientific and Engineering Research, Vol. 6, (Issue 9) |
| 34 | 31 C. C. Ihueze and Ekwueme, O. G. (2016, August), "Modelling And Optimization Of Maintenance Cost Of Roads In Anambra State Using Linear And Non-linear Cost Model", Journal of Manufacturing Sciences and Engineering. |
| 35 | 29 Ihueze C. C. and Chukwumuanya E. O. (2015, April), "Cost Estimation And Waste Production Forecast Models For Sustainable Solid Waste Management: A Study On Anambra State Waste Management System", nternational Journal of Applied Sciences & Engineering, Vol. 3, (Issue 3), pp 14-18 |
| 36 | 39 Christopher Chukwutoo Ihueze and Chika Edith Mgbemena. (2015, February), ") Design For Limit Stresses Of Orange Fruits (Citrus Sinensis) Under Axial And Radial Compression As Related To Transportation And Storage Design", Journal of the Saudi Society of Agricultural Sciences, Elsevier Publication |
| 37 | 46 Christian Sunday Chukwuekezie, Christopher Chukwutoo Ihueze, JamaliahIdris and Gaius Debi Eyu. (2014, March), "Hygrothermal Response Of Plant Fibre Reinforced Composites", ARPN Journal of Engineering and Applied Sciences, Vol. 9, (Issue 3), pp 336-341 |
| 38 | 45 C. C. Ihueze and E.C. Okafor. (2014, March), "Optimal Design For Flexural Strength Of Plantain Fibers Reinforced Polyester Matrix", Journal of Innovative Research in Engineering and Science, Vol. 4, pp 520-537 |
| 39 | 44 C. C. Ihueze and E.C. Okafor. (2014, April), "Response Surface Optimization Of The Impact Strength Of Plantain Fibre Reinforced Polyester For Application In Auto Body Work", Journal of Innovative Research in Engineering and Science, Vol. 4, pp 505-520 |
| 40 | 43 Chukwutoo Christopher Ihueze and Chinedum Ogonna. (2014, April), "Modeling Hyperelastic Behavior Of Natural Rubber/Organomodified Kaolin Composites Oleochemically Derived From Tea Seed Oils(Camellia Sinensis) For Automobile Tire Side Walls Application", Journal of Scientific Research and Reports, Vol. 3, (Issue 19) |
| 41 | 42 Chukwutoo Christopher Ihueze, ChinedumOgonna and A. R. RavindranathaMenon. (2014, March), "2D Static Failure Prediction For Critical Stresses Of An Automobile Tire Side Walls Using Matlab PDE Toolbox", IOSR Journal of Mechanical and Civil Engineering( Iosr-Jmce) (www.iosrjournals.org), 11(4), Pp70-76., Vol. 11, (Issue 4), pp 70-76 |
| 42 | 41 Chukwutoo Christopher Ihueze, Chinedum Ogonna. (2014, March), "Static Analysis Of A P195/55 R16 85H Radial Tire Developed From Natural Rubber/Tea Seed Oil (camellia Sinensis) Modified LaolinVulcanizates", American Journal of Mechanical Engineering and Automation, Vol. 1, (Issue 4), pp 31-37 |
| 43 | 40 Chukwutoo C. Ihueze, Charles C. Okpala. (2014, June), "The Tools And Techniques Of Lean Production System Of Manufacturing", International Journal of Advanced Engineering Technology, pp 22-27 |
| 44 | 54 Christopher C. Ihueze, Charles C. Okpala, Christian E. Okafor and Peter O. Ogbobe. (2013, March), "Robust Design And Optimization Of Production Wastes: An Application For Industries, World Academy Of Science, Engineering And TechnologyRobust Design And Optimization Of Production Wastes: An Application For Industries, World Academy Of Science", World Academy of Science, Engineering and Technology, Vol. 76, (Issue 100), pp 897-904 |
| 45 | 53 Chukwutoo C. Ihueze, Constance C. Obiuto, Christian E .Okafor and Charles C. Okpala. (2013, April), "Orthogonal Array Application And Response Surface Method Approach For Optimal Product Values: An Application For Oil Blending Process", World Academy of Science, Engineering and Technology, Vol. 76, (Issue 122), pp 847-852 |
| 46 | 52 E. C. Okafor , C. C. Ihueze , and S.C. Nwigbo. (2013, April), "Optimization Of Hardness Strengths Response Of Plantain Fibres Reinforced Polyester Matrix Composites (PFRP) Applying Taguchi Robust Design", International Journal of Engineering (IJE), Vol. 27, (Issue 1), pp 1-12 |
| 47 | 51 Chukwutoo C. Ihueze, Constance C. Obiuto, Christian E .Okafor and Charles C. Okpala. (2013, April), "Orthogonal Array Application And Response Surface Method Approach For Optimal Product Values: An Application For Oil Blending Process", World Academy of Science Engineering and Technology, (Issue 76), pp 847-852 |
| 48 | 50 Christopher C. Ihueze, Charles C. Okpala, Christian E. Okafor and Peter O. Ogbobe. (2013, August), "Robust Design And Optimization Of Production Wastes: An Application For Industries", World Academy of Science Engineering and Technology, (Issue 76), pp 897-904 |
| 49 | 49 Christopher C. Ihueze, Christian E. Okafor and Peter O. Ogbobe. (2013, February), "Finite Design For Critical Stresses Of Compressed Biomaterials Under Transportation", International Association of Engineers (IAENG), Vol. 3, pp 1749-1754 |
| 50 | 48 Christopher C. Ihueze, Christian E. Okafor. (2013, August), "Natural Fibers Composites Design And Characterization For Limit Stress Prediction In Multiaxial Stress State", Journal of King Saud University - Engineering Sciences, Elsevier, DOI information: 10.1016/j.jksues.2013.08.002. |
| 51 | 47 Christopher Chukwutoo Ihueze and Alfred NwabunwanneEnetanya. (2013, June), "Energy Absorption And Mechanical Behaviour Of Glass Fibre-Reinforced Polyester (GRP) For Automotive Components Design,", Journal of Mechanical, Aerospace and Industrial Engineering, Vol. 3, (Issue 1), pp 1-14 |
| 52 | 58 C.C. Ihueze, C.C. Obiuto and C. C. Okpala. (2012, May), "Quality Improvement Of Process Product Value Through Robust Design Of Control Parameters.", Research Journal in Engineering and Applied Sciences, Vol. 1, (Issue 1), pp 70-76 |
| 53 | 57 Chukwutoo C. Ihueze ,Nnaemeka S. Obuka and Onyeka Ekwueme. (2012, January), "Influence Of Reinforcement Combinations Of Nanofillers In The Development Of Epoxy-Alumina-Calcium Silicate Hybrid Nanocomposites For Oil And Gas Infrastructures Serving Under Elevated Temperatures", Research Journal in Engineering and Applied Sciences, Vol. 1, (Issue 1) |
| 54 | 57 Chukwutoo C. Ihueze ,Nnaemeka S. Obuka and OnyekaEkwueme. (2012, March), "Influence Of Reinforcement Combinations Of Nanofillers In The Development Of Epoxy-Alumina-Calcium Silicate Hybrid Nanocomposites For Oil And Gas Infrastructures Serving Under Elevated Temperatures", Research Journal in Engineering and Applied Sciences, Vol. 1, (Issue 1) |
| 55 | 56 Chukwutoo C. Ihueze and Charles C. Okpala. (2012, January), "Application Of Taguchi Robust Design As Optimized Lean Production System In Manufacturing Companies.", Research Journal in Engineering and Applied Sciences, Vol. 1, (Issue 1), pp 45-50 |
| 56 | 55 C. C. Ihueze, O. G. Ekwueme, N.S.P Obuka and Ifeyinwa0gbodo. (2012, February), "Evaluation Of Optimum Ashphalt Yield Of A Process", journal of energy technologies and policy, Vol. 2, (Issue 6), pp 24-31 |
| 57 | 64 Chukwutoo C. Ihueze, Onyeka G. Ekwueme, Nnaemeka S. P. Obuka and Ifeyinwa F. Ogbodo. (2012, March), "Evaluation Of Optimum Asphalt Yield Of A Process", Evaluation of Optimum Asphalt Yield of a Process, Journal of Energy Technologies and Policy, Vol. 2, (Issue 5), pp 24-31 |
| 58 | 63 Ihueze, C. C., Okafor, E. C. and Ujam, A. J. (2012, June), "Optimization Of Tensile Strengths Response Of Plantain Fibers Reinforced Polyester Composites (PFRP) Applying Taguchi Robust Design", Innovative Systems Design and Engineering. 3(7), Pp 64-76., Vol. 3, (Issue 8), pp 64-76 |
| 59 | 59 Chukwutoo Christopher Ihueze and Alfred Nwabunwanne Enetanya. (2012, March), "Energy Absorption And Strength Evaluation For Compressed Glass Fibre Reinforced Polyester (GRP) For Automobile Components Design In Crash Prevention Scheme", Journal of Minerals and Materials Characterization and Engineering (JMMCE), Vol. 11, (Issue 1), pp 85-105 |
| 60 | 59 Chukwutoo Christopher Ihueze and Alfred NwabunwanneEnetanya. (2012, January), "Energy Absorption And Strength Evaluation For Compressed Glass Fibre Reinforced Polyester (GRP) For Automobile Components Design In Crash Prevention Scheme", Scientific Journal International, SJI (Journal of Mechanical, Aerospace and Industrial Engineering) , Journal of Minerals and Materials Characterizati, Vol. 11, (Issue 1), pp 85-105 |
| 61 | 73 C. C. Ihueze and C. C. Okpala (2011). (2011, December), "A Survey Of Optimum Manufacturing Strategy As A Tool For Enhanced Industrial Revenue", Australian journal of basic and applied sciences, Vol. 5, (Issue 12), pp 1321-1329 |
| 62 | 72 C. C. Ihueze and P. C. Onyechi. (2011, June), "Appraisal Of Manufacturing Processes And Product Specification By Numerical Approach", African Journal of Basic and Applied Sciences (AJBAS), IDOSI Publications, Vol. 3, (Issue 4), pp 161-170 |
| 63 | 71 C. C. Ihueze and P. C. Onyechi. (2011, April), "Historical Data And The Use Of Forecasting In Production Planning", African Journal of Basic and Applied Sciences (AJBAS), IDOSI Publications, Vol. 3, (Issue 4), pp 147-160 |
| 64 | 70 Ihueze, C.C., Onyechi, P.C., Aginam, H., and Ozoegwu, G.C.. (2011, February), ". Design Against Dynamic Failure Of Structures With Beams And Columns Under Excitation", International Journal of Theoretical and Applied Mechanics, Vol. 6, (Issue 2), pp 153-164 |
| 65 | 69 Ihueze, C.C., Onyechi, Ofochebe, M. (2011, April), "Finite Design For Hydrodynamic Pressures On Immersed Moving Surfaces", International journal of mechanics and solids, Vol. 6, (Issue 2), pp 115-128 |
| 66 | 68 Ihueze, C.C., Onyechi, P.C., Aginam, H., and Ozoegwu, G.C. (2011, March), "Finite Design Against Buckling Of Structures Under Continuous Harmonic Excitation", International Journal of Applied Engineering Research, Vol. 6, (Issue 12), pp 1445-1460 |
| 67 | 67 Chukwutoo Christopher Ihueze and Nnaemeka Sylvester Obuka. (2011, May), "A Review Of Corrosion And Corrosion Schemes For Metal And Composite Oil And Gas Systems: Management And Development", Journalof Advanced Materials (An International Journal of Processing, Science, Characterization and Application of Advanced Materials) (JAM), Vol. 43, (Issue 2), pp 35-54 |
| 68 | 66 Chukwutoo Christopher Ihueze and Mgbemena, Chinedu and Ugwu, Sylvester. (2011, February), "The Influence Of Creep On The Mechanical Properties Of Calcium Carbonate Nanofiller Reinforced Polypropylene", Journal of Minerals and Materials Characterization and Engineering (JMMCE), Vol. 10, (Issue 2), pp 143-159 |
| 69 | 65 Chukwutoo Christopher Ihueze ,MgbemenaChinedu and E. E Nnuka. (2011, May), "Creep Function Parameter Analysis For Optimum Design With Calcium Carbonate Nanofiller Polypropylene Composite", Journal of Minerals and Materials Characterization and Engineering (JMMCE) USA Vol. 10, No. 1, pp 27-48 www.jmmce.org ., Vol. 10, (Issue 1), pp 27-48 |
| 70 | 62 C.C. Ihueze, C.C. Obiuto and C. C. Okpala. (2011, February), "Optimal Approaches To Robust Design For Industrial Wastes", Journal of Engineering and Applied sciences, Faculty of Engineering , NnamdiAzikiwe University Awka 7(2) (2011) Pp 58-67, Vol. 7, (Issue 2), pp 58-67 |
| 71 | 61 C. C. Ihueze and E.C. Okafor. (2011, March), "Limiting Stresses And Elastic Properties Of Biological Material Under Axial And Radial Compression As Related To Their Handling And Containerization", Journal of Engineering and Applied sciences, Faculty of Engineering , NnamdiAzikiwe University Awka, Vol. 7, (Issue 1), pp 5-10 |
| 72 | 82 Chukwutoo Christopher Ihueze and Pius C. Onyechi. (2010, March), "Experimental Design And Analysis Of HygrothermalBehaviour Of Coconut Fibre Reinforced Polymer (CFRP)", ournal of Applied Sciences Research (JASR), Jordan), Vol. 6, (Issue 12), pp 1926-1935 |
| 73 | 81 Ihueze, Chukwutoo. C., Edelugo Sylvester, and Okafor,Emeka.C. (2010, February), "Finite Elements Approaches In The Solution Of Field Functions In Multidimensional Space: A Case Of Boundary Value Problems", Journal of Minerals and Materials Characterization and Engineering (JMMCE), USA Vol. 9, No. 10, Pp 929-959www.jmmce.org., Vol. 9, (Issue 10), pp 929-959 |
| 74 | 80 Chukwutoo Christopher Ihueze and Mgbemena, Chinedu. (2010, January), "Effects Of Reinforcement Combinations Of Calcium Carbonate Nanofiller On The Mechanical And Creep Properties Of Polypropylene (PP)", ,Journal of Minerals and Materials Characterization and Engineering (JMMCE), Vol. 9, (Issue 10), pp 887-917 |
| 75 | 79 Ihueze, Chukwutoo. C., and Okafor, Emeka.C. (2010, August), "Finite Elements Solution Technique For Multidimensional Boundary Value Continuum Problems", International Journal of Engineering Science, Pan African Journal Series Ghana, Vol. 2, (Issue 2), pp 5-27 |
| 76 | 78 Ihueze, Chukwutoo. C.. (2010, May), "Finite Elements In The Solution Of Continuum Field Problems", Journal of Minerals and Materials Characterization and Engineering (JMMCE), Vol. 9, (Issue 5), pp 427-452 |
| 77 | 77 Ihueze, C. C.. (2010, January), "The Galerki Approach For Finite Elements Of Field Functions: The Case Of Buckling In GRP", Journal of Minerals and Materials Characterization and Engineering (JMMCE), Vol. 9, (Issue 4), pp 389-409 |
| 78 | 76 Ihueze, C. C. (2010, July), "Design For Limit Variability In Quality Of Industrial Products: A Case Study Of CUTIX Cable Manufacturing Company, Nnewi", Nigeria. African Research Review: An International Multi- Disciplinary Journal, Vol. 4, (Issue 3), pp 344-367 |
| 79 | 75 Ihueze, Chukwutoo. C., and Okafor, Emeka. C.. (2010, July), "Multivariate Time Series Analysis For Optimum Production Forecast:A Case Study Of 7UP Soft Drink Company In Nigeria", African Research Review: African Research Review: An International Multi- Disciplinary Journal, Ethiopia Vol.4 (3a), July, 2010, www.afrrevjo.org, Pp , Vol. 4, (Issue 3), pp 276-305 |
| 80 | 74 Ihueze, C. C. (2010, January), "Numerical Approach To Appraisal And Control Of IBETO Battery Production Process", NSETECHNICAL TRANSACTIONS, Vol. 45, (Issue 1), pp 1-13 |
| 81 | 60 C. C. Ihueze, O.O. Otuu , E. C. Oriaku, A.I. Gbasouzor and E.C.Okafor. (2010, April), "Development Of A Compression Test Rig For Evaluation Of Mechanical Properties Related To Design For Containerization And Transportation Of Fruits.", Journal of Engineering and Applied sciences, Faculty of Engineering ,NnamdiAzikiwe University Awka, Vol. 6, (Issue 1), pp 56-59 |
| 82 | 84 Enetanya, A. N. and Ihueze C. C. (2009, September), "Finite Difference Approach For Optimum Compressive Strengths Of GRP Composites", NSE TECHNICAL TRANSACTIONS, Vol. 44, (Issue 3), pp 40-55 |
| 83 | 86 Ihueze, C.C. (2008, January), "Computational Approach For Optimum Compressive Strengths Of GRP Composites", Jounal of Engineering and Applied Sciences, Vol. 4, (Issue 1), pp 62-74 |
| 84 | 85 Ihueze, C.C. (2008, March), "Computational Modeling Of Hygrothermal Response Of Coconut Fibre Reinforced Composites", knowledge Review,., Vol. 16, (Issue 2) |
| 85 | 90 Ihueze, C.C. (2007, May), "Optimum Insulation Models For One Dimensional Steady State Heating", Jounal of Engineering and Applied sciences, Vol. 3, (Issue 1), pp 76-86 |
| 86 | 89 Ihueze, C.C. (2007, February), "Modeling Of Creep In Raffia Plant Fibre Reinforced Plastics", Jounal of Engineering and Applied sciences, Vol. 3, (Issue 1), pp 44-50 |
| 87 | 88 Ihueze, C.C (2007. (2007, April), "Creep Response Analyses Of Quasi - Isotropic Bamboo Fibre Reinforced Composite Structures", NSE Technical Transactions, Vol. 42, (Issue 4), pp 6--18 |
| 88 | 93 Ihueze, C.C. (2006, April), "Hygrothermal Sensitivity Of GRP Composite Properties", ournal of Scientific and Industrial Studies, Vol. 4, (Issue 1), pp 8-14 |
| 89 | 94 Ihueze, C.C. (2005, May), "Effects Of Random Material Properties On Buckling Of GRP Composites", Journal of Research in Engineering, vol. 2, number 2, 2005, Pp 54-61, Vol. 2, (Issue 2), pp 54-61 |
| 90 | 91 Ihueze, C.C. (2005, January), "Optimum Strength Of GRP Parts In Automobile Body Work", Global Journal of Mechanical Engineering., Vol. 6, (Issue 1), pp 1-7 |
| 91 | 95 Ihueze, C.C. and Enetanya A. N (2004). (2004, February), "Finite Element Thermal Analysis Of GRP Auto Body Composite", Journal of Science and Technological Research, Vol. 3, (Issue 4), pp 101-110 |
| Conference Papers | |
| 1 | 3. Christopher Chukwutoo Ihueze. (2018, September), "The Role Of The Registrar, CFO &CHR In The 21st Century University", AAU ADVANCEMENT WORKSHOP ORGANIZED BY ASSOCIATION OF AFRICAN UNIVERSITIES(AAU) AT Jades hotel Abuja,26th -28th Sept, 2018 |
| 2 | 9. Christopher Chukwutoo Ihueze. (2014, July), "The Making Of Nigerian Engineer And Common Engineering Courses: Panacea For Infrastructural Development", The First Nuesa Convention At Faculty Of Engineering NnamdiAzikiwe University Awka On 3rd July, 2014 |
| 3 | 12. Chukwutoo C. Ihueze, Constance C. Obiuto, Christian E .Okafor and Charles C. Okpala. (2013, April), "Orthogonal Array Application And Response Surface Method Approach For Optimal Product Values: An Application For Oil Blending Process", WASET 2013 in Johannesburg South Africa |
| 4 | 12. Chukwutoo C. Ihueze, Constance C. Obiuto, Christian E .Okafor and Charles C. Okpala. (2013, April), "Orthogonal Array Application And Response Surface Method Approach For Optimal Product Values: An Application For Oil Blending Process", WASET 2013 in Johannesburg South Africa |
| 5 | 11. Christopher C. Ihueze, Charles C. Okpala, Christian E. Okafor and Peter O. Ogbobe. (2013, April), "Robust Design And Optimization Of Production Wastes: An Application For Industries", WASET 2013 in Johannesburg South Africa. |
| 6 | 10. Christopher C. Ihueze, Christian E. Okafor and Peter O. Ogbobe. (2013, July), "Finite Design For Critical Stresses Of Compressed Biomaterials Under Transportation", World Congress on Engineering 2013 at Imperial College London, International Association of Engineers (IAENG),, Vol. 3, pp 1749-1754 |
| 7 | 13. Ihueze, C. C., Okafor, E. C. and Ezeonu, Stella. (2012, November), "Optimal Design Of Natural Fibers Composite Strengths Employing Archimedes Principle", ASME, IMECE, 9-15th NOV., 2012, HOUSTON TEXAS, USA. |
| 8 | 15. C. C. Ihueze and C. C. Okpala. (2011, November), "A Survey Of Optimum Manufacturing Strategy As A Tool For Enhanced Industrial Revenue", School of Engineering and Engineering Technology of Federal university of Technology Mina on 16th-18th NOV. 2011. |
| 9 | 14. C. C. Ihueze, C. C. Okpala and C .C. Obiuto.. (2011, November), "Optimization Of Industrial Wastes Through Robust Design", 2nd Biennial Engineering Conference of School of Engineering and Engineering Technology of Federal university of Technology Mina on 16th-18th NOV. 201 |
| 10 | 17. Ihueze, C. C., and Onwuka, K.. (2010, February), "Innovation And Competitiveness: Mechanisms For Surmounting Trade Barriers In Global Market For Natural ResourcesInnovation And Competitiveness: Mechanisms For Surmounting Trade Barriers In Global Market For Natural Resources", 2nd International Conference of Natural Raw Materials Research and Development Council Abuja on 9th - 11th February, 2010 at RMRDC Headquarters Abuja, |
| 11 | 16. Ihueze, C. C., Okafor, E.C., and Onwuka, K. (2010, February), "Education And Human Capital Development: Synergy For Natural Resource Management And Technological Advancement", 2nd International Conference of Natural Raw Materials Research and Development Council Abuja on 9th - 11th February, 2010 at RMRDC Headquarters Abuja, |
| 12 | Ihueze C. C. (2009, May), "18. Ihueze C. C 2009 The Place Of Design And Production Engineering In Product Development", Department of Industrial / Production Engineering of NnamdiAzikiwe University Awka |
| Other Relevant Publications | |
| 1 | 1. Christopher Chukwutoo Ihueze. "Sustainable Economic Growth Through Technological Innovations, A Lead Paper Presented", (Presentation, 2019 November) |
| 2 | 5. Christopher Chukwutoo Ihueze. "The Development Of Automotive Parts Industrial Park In Nigeria: Benefits And Challenges. Being A KEYNOTE SPEECH", (Presentation, 2018 February) |
| 3 | 4. Christopher Chukwutoo Ihueze. "Raw Material Processing And Utilization For Sustainable Development", (Presentation, 2018 August) |
| 4 | 2. Christopher Chukwutoo Ihueze. "Dividends Of Professional Registration In Engineering Practice For Technological Advancement,a Lead PaperPresented", (Presentation, 2018 November) |
| 5 | Science and Technology for National Development,. "7. Christopher Chukwutoo Ihueze", (Presentation, 2015 July) Awka |
| 6 | 6. Christopher Chukwutoo Ihueze. "Harnessing Science, Technology And Innovations (STI) For Sustainable Industrial And Economic Developmen T", (Presentation, 2015 October) |
| 7 | 8. Christopher Chukwutoo Ihueze. "KEYNOTE SPEECH", (Presentation, 2014 October) |
Academic Leadership Qualities
| Supervisions | |
|---|---|
| 1 | "Managing Corrosion in Oil and Gas pipe lines by impressed current cathodicprotection." (2017). Completed Masters project by Igbesi Friday C |
| 2 | "Quality Appraisal of A – Z Lubricants using Robust Design Methods" (2012). Completed Masters project by Obiuto Constance C.(2009376003F) |
| 3 | "Evaluation of Mechanical Properties of Polypropylene/Calcium Carbonate Nano composite at various creep conditions." (2010). Completed Masters project by MgbemenaChinedum Ogonna(2007246013P) |
| 4 | "Analysis of Process for Bar soap production." (2010). Completed Masters project by Onuorah Edwin Uchenna(2007246006P) |
| 5 | "Modeling for Forecasting the cost of selected petroleum products in Nigeria" (2012). Completed Masters project by OgbodoIfeyinwa Faith(2009367007F) |
| 6 | "Development of Alumina Reinforced Epoxy Composite (AREC) for oil and gas pipeline system" (2012). Completed Masters project by ObukaNnaemeka Sylvester(2008376002F) |
| 7 | "Evaluation of Dynamic Response of Plantain Fibre Reinforced High Density Polyethylene Composites for Application in Autobody Fenders" (2017). Completed Masters project by Obiafudo, Obiora Jeremiah(2012376013P) |
| 8 | "Robust Design for optimal Setting of process wastes parameters in selected manufacturing companies" (2012). Completed Doctorate project by Okpala Charles Chikwendu(2007247006F) |
| 9 | "Optimal Design and Characterization of Plantain Fiber Reinforced Polyester Matrixes" (2014). Completed Doctorate project by Okafor Emeka Christian(2010377002P) |
| 10 | "Development of Natural Rubber/Organomodified Kaolin Composites for Automobile Tire Sidewalls Application" (2015). Completed Doctorate project by Mgbemena ChinedumOgonna(2010247004F) |
| 11 | "Evaluation of the Mechanical Properties of Wood Ash Particles Reinforced Polypropylene for Auto Parts Application" (2016). Completed Doctorate project by Aguh, Patric Sunday(2007247004F) |
| 12 | "Development of Models for Estimation of Road Maintenance Cost in Anambra State" (2016). Completed Doctorate project by Ekwueme, OnyekachukwuGodspower(2012377004F) |
| 13 | "Development of Models for Sustainable Municipal Solid Waste Management for Awka Municipality, Awka" (2017). Completed Doctorate project by Okechukwu, Chukwumuanya Emanuel(2011377001P) |
| 14 | "Development of plantain pseudo stem fibre reinforced high density polyethylene composite for oil and gas pipelines system application" (2019). Completed Doctorate project by OBUKA Sylvester(2012377010P) |
| 15 | "Development of adaptive optimal corrosion rate models for oil pipeline systems" (2019). Completed Doctorate project by NWANKWO Constance(2012377002F) |
| 16 | "Performance enhancement of INNOSON injection moulding system" (2019). Completed Doctorate project by Obudulu Ifeyinwa(2012377003F) |
| 17 | "Analysis of road traffic crashes and development of crash predictive models in Anambra state" (2019). Completed Doctorate project by Onwurah Uchendu(2012377007F) |