Prof. Chuka Emmanuel Chinwuko

Prof. Chuka Emmanuel Chinwuko is a READER in INDUSTRIAL AND PRODUCTION ENGINEERING Department, Faculty Of Engineering in Nnamdi Azikiwe University

Prof. Chuka  Emmanuel Chinwuko

Personal Information

Email:
Phone:
Address:
Industrial And Production Engineering, Faculty Of Engineering, Nnamdi Azikiwe University, Awka.
Faculty/Unit:
FACULTY OF ENGINEERING
Department/Sub-Unit:
INDUSTRIAL AND PRODUCTION ENGINEERING

Social Profiles

Academic Qualifications

Degrees / Basic Certificates
1Nnamdi Azikiwe University. (Doctor of Philosophy, September, 2012)
October, 2007 to August, 2012
PhD Mechanical/Production Engineering
2Anambra State University of Technology. (Master Degree, August, 1991)
October, 1988 to July, 1991
M.ENG. Mechanical/Production Engineering
3Anambra State University of Technology. (Bachelor Degree, October, 1986)
October, 1981 to July, 1986
B.ENG. Mechanical/Production Engineering
4Agulu Boys Secondary School, Agulu, Anambra State. (SSCE, August, 1981)
October, 1976 to July, 1981
WAEC WAEC

Relevant/Working Experience

1Head of Department, Industrial and Production Engineering, Nnamdi Azikiwe University, Industrial and Production Engineering
October, 2014 to September, 2019
2Coordinator, Mechanical/Production Engineering CEP Programme, Nnamdi Azikiwe University, Industrial and Production Engineering
October, 2013 to September, 2014
3Coordinator Industrial and Production Engineering Post Graduate Programme, Nnamdi Azikiwe University, Industrial and Production Engineering
October, 2013 to September, 2014
4SIWES Coordinator, Nnamdi Azikiwe University, Industrial and Production Engineering
October, 2006 to September, 2012

Creative Output

Journal Articles
1Charles Chikwendu Okpala; Emmanuel Chuka Chinwuko and Chukwuemeka Daniel Ezeliora. (2021, May), "Mechanical Properties and Applications of Coir Fiber Reinforced Composites", International Research Journal of Engineering and Technology (IRJET), Vol. 8, (Issue 7), pp 2010-2019, e-ISSN: 2395-0056 Volume: 08 Issue: 07 | July 2021 www.irjet.net p-ISSN: 2395-0072 © 2021, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 2010 to 2019
2Nwaemekwe C. O., Chinwuko C. E., Mgbemena C. E.. (2020, May), "Development and Implementation of a Computerised Production Planning and Control System", Journal of Engineering and Applied Science, Vol. 17, (Issue 1), pp 168-187
3Ikenna Tobechukwu Okorocha, Chuka Emmanuel Chinwuko, Chika Edith Mgbemena, Chinedum Ogonna Mgbemena. (2020, May), "Gas lift optimization in the oil and gas production process: a review of production challenges and optimization strategies.", International Journal of Industrial Optimization, Vol. 1, (Issue 2), pp 61-70
4Ifowodo, H. F., Chinwuko, E. C. & Mgbemena, C. O.. (2020, September), "Forecast of Crude Oil Production Output in an Oil Field in Niger Delta Region of Nigeria", International Journal of Engineering & Production Research, Vol. 31, (Issue 1), pp 161-170, DOI:10.22068/ijiepr.31.1.161
5Ikenna Tobechukwu Okorocha, Chuka Emmanuel Chinwuko, Chuka Edith Mgbemena, Cinedun Gonna Mgbemena. (2020, September), "Gas lift optimization in the oil and gas production process: a review of production challenges and optimization startegies", International Journal of Industrial Optimization, Vol. 1, (Issue 2), pp 61-70, P-ISSN 2714 6006 and E-ISSN 2723-3022
6Chinedum Ogonna Mgbemena, Chika Edith Mgbemena and Emmanuel Chuka Chinwuko. (2019, May), "Fabrication, Characterization and Analysis of a Plantain Fiber Reinforced Composite Anti-Crash Helmet", Journal of Engineering and Applied Sciences, Vol. 4, pp 1-10
7Henry F. Ifowodo, Emmanuel C. Chinwuko, Chinedum O. Mgbemena. (2019, September), "Forecast Of Crude Oil Production Output In An Oil Field In The Niger Delta Region Of Nigeria", International Journal of Industrial Engineering & Production Research
8Mgbemena, C. O., Chinwuko, E. C, Ifowodo, H. F.. (2019, March), "Production Constraints Modelling: A Tactical Review Approach", Journal of Optimization in Industrial Engineering, doi: 10.22094/joie.2019.564999.1554
9Chukwuedozie N. Ezema, Inyiama C. Hyacinth, and Chinwuko E Chuka.. (2017, March), "Optimum Common Frequency Routing (CER) of JIF System with Time Varying Demand and Production Capacities", European Journal of Advance in Engineering and Technology, Vol. 4, (Issue 2), pp 120-128
10Chinwuko Emmanuel Chuka, Nwakoby John Oguejiofor, Asowo Clement Sunday. (2016, June), "Evaluation and optimization of inventory control system in small and medium scale industries", International Journal of Modern Studies in Mechanical Engineering (IJMSME), Vol. 2, (Issue 1), pp 1-13
11Chinwuko Emmanuel Chuka, Ifowodo Henry Freedom, Umeozokwere Anthony O.. (2016, September), "Risk assessment and consequence evaluation of loss of containment in petroleum industry", Journal of Modern Studies in Mechanical Engineering (IJMSME), Vol. 2, (Issue 1), pp 14-28
12Chinwuko Emmanuel Chuka, Ifowodo Henry Freedom, Umeozokwere Anthony O.. (2016, July), "Transient Model-Based Leak Detection and Localization Technique for Crude Oil Pipeline: A Case of N.P.D.C", Saudi Journal of Engineering and Technology, Vol. 1, (Issue 2), pp 37-48
13Chinwuko Emmanuel Chuka, Nwakoby John Oguejiofor, Asowo Clement Sunday. (2016, June), "Evaluation and optimization of inventory control system in small and medium scale industries", International Journal of Modern Studies in Mechanical Engineering (IJMSME), Vol. 2, (Issue 1), pp 1-13
14D.C. Anizoba, G.O Chukwuma, E.C Chukwuma, and E.C. Chinwuko. (2015, June), "Determination of Aquifer Characteristics from Geo-electrical Sounding Data in parts of Anambra State, Nigeria", International Journal of Innovation and Applied Studies, Vol. 11, (Issue 4), pp 832-843, ISSN 2028-9324
15Nwoye C.I., Mbah C.N., Amalu N.I., Nwakpa S.O., Chinwuko E.C., Nwosu I.E.. (2015, July), "A Computational Mechanism for Analysis of the Functional Dependence of Solar Energy Transmissivity on Collector’s Latitude Angle and Exposure Time", American Journal of Computing Research Repository, Vol. 3, (Issue 1), pp 9-13
16C.I Nwoye, P.C. Nwosu, P. Okonji, E.C. Chinwuko. (2015, September), "Response of Weldment Heat affected Zone Hardness to the Operational Welding Current Resistance", International Journal of Materials Lifetime, Vol. 2, (Issue 1), pp 1-5
17Oweziem B.U., Chinwuko E.C., Ezeliora C.D., Obaseki E.. (2015, March), "Design, fabrication and characterization of an electric powered yam pounding machine", American Journal of Mechanical Engineering and Automation, Vol. 2, (Issue 2), pp 26-35
18C.I Nwoye, E.C. Chinwuko, P.C Nwosu, N.E. Idenyi. (2015, June), "An Implicit Response Analysis of Compressive strength of Concrete based on Its Ageing Periods and Cement Replacement with Bagasse Ash", International Journal of Materials Lifetime, Vol. 2, (Issue 1), pp 13-21
19C.I Nwoye, E.C. Chinwuko, P.C Nwosu, N.E. Idenyi. (2015, June), "An Implicit Response Analysis of Compressive strength of Concrete based on Its Ageing Periods and Cement Replacement with Bagasse Ash", International Journal of Materials Lifetime, Vol. 2, (Issue 1), pp 13-21
20Nwoye C.I., Chinwuko E.C., Asuke F., Aigbodion V.S., Nwosu P.C., Idenyi N.E. (2015, September), "Implicit Analysis of Heat Affected Zone Hardness (HAZH) of Aluminum Weldment As a Function of HAZH of similarly Cooled Metals", J.Mater. Environ. Sci., Vol. 6, (Issue 1), pp 46-51, ISSN: 2028-2508 CODEN: JMESCN
21Nwoye C.I., Nwakpa S.O., Nwosu I.E., Udo J.U., Chinwuko E.C.. (2014, June), "Idenyi N.E. Multi-Factorial Analysis of Atmospheric Noise Pollution Level Based on Emitted Carbon and Heat Radiation during Gas Flaring", Journal of Atmospheric Pollution, Vol. 2, (Issue 1), pp 22-29
22Chinwuko Emmanuel Chuka, Ezeliora Chukwuemeka Daniel, Okoye Patrick Ugochukwu, Obiora Obiafudo J.. (2014, September), "Analysis of a queuing system in an organization (a case of First Bank PLC, Nigeria)", American Journal of Engineering Research (AJER), Vol. 3, (Issue 2), pp 63-72, ISSN (e): 2320-0847 ISSN (p): 2320-0936
23Chinwuko E.C., Chidi U.N., Ezeriola C.D., Nwadike E.C.. (2014, October), "Design and construction of a powered toggle jack system", American Journal of Mechanical Engineering and Automation, Vol. 1, (Issue 6), pp 66-71
24Chinwuko Emmanuel Chuka, Odio B. O, Chukwuneke J. L., Sinebe J. E.. (2014, July), "Investigation of The Effect of Corrosion on Mild Steel In Five Different Environments", International Journal of Scientific and Technology Research, Vol. 3, (Issue 7), pp 306-310, ISSN 2277-88616(USA)
25Nwoye C.I., Nwosu P.C., Chinwuko E.C., Nwakpa S.O., Nwosu I.E., Idenyi N.E.. (2014, June), "Reliability Level of Al-Mn Alloy Corrosion Rate Dependence on Its As-Cast Manganese Content and Pre-Installed Weight in Sea Water Environment", Journal of Mining and Metallurgy, Vol. 2, (Issue 3), pp 57-63
26Nwoye C.I., Ede S.E., Onyia W.C., Nwosu P.C., Chinwuko E.C., Mbah C.N.. (2014, April), "Factorial Optimization of Gypsum Addition to Foundry Slag during Production of Maximum-Compressive-Strength Compliant Cement", Journal of Material Sciences, Vol. 2, (Issue 3), pp 9-16, e-ISSN: 2321-6212 p-ISSN: 2347-2278
27Ezeliora Chukwuemeka Daniel, Chinwuko Emmanuel Chuka. (2013, June), "Forecasting Product Sales for Masters Energy Oil and Gas using Different Forecasting Methods", International Journal of Applied Sciences and Engineering Research, Vol. 2, (Issue 3), pp 241-255
28Chinwuko Emmanuel Chuka, Ezeliora Chukwuemeka Daniel, Ogunoh Arinze Victor, Nwosu Moses C. (2013, June), "Regression and Time Series Analysis of Petroleum Product Sales in Masters Energy Oil and Gas", International Journal of Science, Engineering and Technology Research (IJSETR), Vol. 2, (Issue 6), pp 1285-1303
29Jude Ezechi Dara, Ikebudu Kingsley Okechukwu, Ubani Nelson Obinna, Chuka E. Chinwuko and Obiekwe A. Ubachukwu. (2013, January), "Evaluation of a Passive Flat-Plate Solar Collector", International Journal of Advancements in Research & Technology, Vol. 2, (Issue 1), pp 10-15, ISSN 2278-7763 (USA)
30Nwosu M.C., Chinwuko E.C.. (2013, September), "Investigation of the Characteristic Behaviours of Cast Iron, Aluminum and Brass under the effects of cutting speeds and feed rates in Cylindrical Machining Operation", International Journal of Engineering and Advanced Technology Studies (IJEATS), Vol. 1, (Issue 2), pp 23-33
31Ogunoh Arinze Victor, Chukwuemeka Daniel E, Chinwuko Emmanuel Chuka, Nwosu Moses C,. (2013, June), "Regression and Time series Analysis of Kerosene Product Sales in Masters Energy Oil and Gas", International Journal of Science, Engineering and Technology Research (IJSETR), Vol. 2, (Issue 6), pp 1264-1284
32Ezeliora C. D., Onyechi P. C., Chinwuko C. E., and Chukwumuanya E.O.. (2013, February), "Moving Average Analysis of Plastic Production Yield in a Manufacturing Industry", International Journal of Multidisciplinary Sciences and Engineering, Vol. 4, (Issue 2), pp 65-73, ISSN: 2045-7057
33Okolie, P.C., Okafor C.E, Chinwuko C.E., Ubani N.O., Okenwa U.. (2012, April), "Design for Temperature Controlled Solar heated chick brooder", International Journal of Scientific and Engineering Research, Vol. 3, (Issue 4), pp 1-7
34Chinwuko C.E., Chukwuneke J. L, Okolie P.C. and Dara E.J.. (2012, June), "Modeling and Optimization of Electricity Distribution Planning System Using Dynamic programming Techniques: A Case of Power Holding Company of Nigeria (PHCN)", International Journal of Multidisciplinary Sciences and Engineering (IJMSE), Vol. 3, (Issue 6), pp 39-46
35Ikebudu O.K., Chinwuko C.E., and Chukwumuanya E.O.. (2012, February), "The Effect of Bridging Liquid Surface Tension and Specific Surface Area on Strength Factor of Coal Agglomerates", Journal Mechanics Engineering and Automation, Vol. 2, (Issue 2)
36Mgbemena, C.E., Mgbemena C. O., Chinwuko C.E.. (2011, April), "A regression Analysis Approach to Queuing System Modelling: A case of Banks", Journal of Applied Science Research, Vol. 7, (Issue 3), pp 200-212, ISSN: 1995-0748
37Chinwuko C.E., Prof. Uba Nwuba and Mgbemena C.O.. (2011, August), "Optimum Reliability and cost of power Distribution System: a case of Power Holding Company of Nigeria", International Journal of Engineering Science and Technology (IJEST), Vol. 3, (Issue 8), pp 6671-6683, ISSN: 0975-5462
38Chinwuko C.E., Mgbenema C.O., Aguh P.S. Ebhota W.S.. (2011, November), "Electricity Generation and Distribution in Nigeria: Technical Issues and Solutions", International Journal of Engineering science and Technology (IJEST), Vol. 3, (Issue 11), pp 7923-7930
39Okolie, P.C., Okafor E.C., Chinwuko C.E.. (2010, September), "Optimal Production Mix for bread Industries: A Case Study of Selected Bakery Industry in Eastern Nigeria", Journal of Engineering and Applied Sciences, Vol. 5, (Issue 6), pp 403-412, ISSN:1816-949X
40Mgbemena, C. E., Mgbemena C. O., Chinwuko C. E.. (2010, April), "A nonlinear Approach to Queuing System Modelling", International Journal of Engineering Science and Technology, Vol. 2, (Issue 11), pp 6829-6839, ISSN: 0975-5462
41Nwigbo. S.C. Chinwuko C.E., Achebe C.H. and Tagbo D.A. (2008, September), "Design of Breadfruit Shelling Machine. African Research Review", An International Multi-Disciplinary Journal, Vol. 2, (Issue 4)
42Achebe, H.C., Nwigbo S.C., Chinwuko C.E., Odhomi M.O.. (2008, August), "Energy losses through unharnessed biomass in South-Eastern Region of Nigeria", African Research Review: An International Multi-disciplinary Journal, Vol. 2, (Issue 3), pp 20-34
43Ekwuozor, S.C., Aguh P.S., Chinwuko C. E., Gbasouzor A.I. A. (2008, July), "Design and Characterization of a Laboratory Model of Polythene Recycling Machine", Natural and Applied Sciences Journal, Vol. 10, (Issue 3), pp 276-282
44Achebe, H.C., Nwigbo S.C., Chinwuko C.E., Odhomi M.O.. (2007, March), "Biogas Generation: a Viable Cleaner Alternative Energy Source in South Eastern Region of Nigeria", Journal of Engineering and Applied Sciences (JEAS),, Vol. 3, pp 31-34
Conference Papers
1Mgbemenna C. O., Mgbemena C.E and Chinwuko C.E.. (2018, November), "Fabrication, Characterization and Analysis of a Plantain Fiber Reinforced Composite Crash Helmet", Faculty of Engineering, UNIZIK, pp 192-198
2D. C. Anizoba, L. C. Orakwe, E. C. Chinwuko, A. I. Chinwuko. (2018, September), "Hydrogeophysical and Geotechnical Investigation in Ufuma and its environs, Anambra State Nigeria", NIAE-SE
3Chinwuko Emmanuel Chuka, and Onyechi Pius C.. (2014, May), "Forecasting of product sales in masters energy oil and gas", Faculty of Engineering, UNIZIK, pp 144-158
4Chinwuko Emmanuel Chuka and Ezechi Dara Jude. (2014, May), "Statistical Analysis of a production Data in a Manufacturing Industry", Faculty of Engineering, UNIZIK, pp 268-276, Paper F30 pp. 268-276
5Chinwuko Emmanuel Chuka and Nwosu Moses C.. (2014, May), "Analysis of Queuing System in an Organization (A case of First Bank PLC Nigeria)", Faculty of Engineering, UNIZIK
6Ikebudu, K.O., Atanmo P.N and Chinwuko C.E.. (2011, June), "Determination of surface free energy of sub-bituminuous coal Agglomerates from contact angle measurement", , ISBN:978-19251-7-6 ISSN: 2078-0966 (online) (USA)
7Ikebudu K.O., Chinwuko C.E, Dara IE.. (2011, November), "Measurement of crushing strength of coal Agglomerates", , Vol. 3, pp 2329-2332, Vol.III pp.2329-2332. ISSN: 2078-0966 (online) (London, UK).

Academic Leadership Qualities

Supervisions
1"Optimization of Inventory system in small and medium scale industry: A case of Evepon Industries Limited" (2016). Completed Masters project by 2012376011P
2"Risk analysis of Pipe line leakages in oil and gas industry" (2016). Completed Masters project by 2013376001F
Grants
1Awardee: "Parametric Prediction and Optimization on mild steel geometry composition using TIG Submerged and Oxyfuel welding methods" (August, 2022 to November, 2022). Completed sponsored grant by TETFUND
Editorships
1Editor, "International Journal of Modern Studies in Mechanical Engineering" (July, 2015)
Examinerships
1Chief Examiner, "Post-Graduate Examination," (May, 2020). Completed External Exam
Contributions to the University/Society
1PhD Supervision, "Postgraduate Supervisor PhD" (March, 2017 to December, 2021)

Membership of Professional/Relevant Bodies

1Professional Member, "COREN" - R.21125 (member since 2011), https://www.coren.gov.ng
2Professional Member, "Nigerian Society of Engineers" - 23876 (member since 2010), https://www.nse.gov.ng